Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
acrux
PostPosted: Fri Jan 12, 2007 8:57 am 
Offline

Joined: Thu Oct 19, 2006 7:19 am
Posts: 271
Location: Italy/Greece
Image

we are happy to announce that our first (internal) 2.2 release candidate seems to work... :)
Here the first boot:
Code:
Welcome to minicom 2.2

OPTIONS:
Compiled on Dec 20 2006, 23:27:56.
Port /dev/ttyS0

Press CTRL-A Z for help on special keys

EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (BUILD 2006110113)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000
RAM TEST (fill random)... Done.
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
channel 0 unit 0 : ata | IBM-DBCA-204860 | BC3OA87F
ATA device not present or not responding
Welcome to SmartFirmware(tm) for bplan EFIKA5K2
Version 1.3 (20061107101950)
SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
All Rights Reserved.
Pegasos BIOS Extensions Copyright 2001-2006 by bplan GmbH.
All Rights Reserved.
ok ls hd
RDB partition 0 <unknown>: <swap> (0x53575000)
RDB partition 1 <LNX>: </boot> (0x4C4E5800)
RDB partition 2 <unknown>: </> (0x52465300)
ok boot hd:1 zImage-Efika root=/dev/sda3 panic=30 console=ttyPSC0

zImage starting: loaded at 0x00400000 (sp: 0x017ffe90)
Allocating 0x4f3980 bytes for kernel ...
OF version = 'EFIKA5K2,1.3'
gunzipping (0x1800000 <- 0x407000:0x631515)...done 0x4c51b8 bytes
Finalizing device tree... using OF tree (promptr=01003ed8)
OF stdout device is: /failsafe
command line: root=/dev/sda3 panic=30 console=ttyPSC0
memory layout at init:
alloc_bottom : 01cf8000
alloc_top : 30000000
alloc_top_hi : f000c000
rmo_top : 30000000
ram_top : f000c000
Looking for displays
instantiating rtas at 0x07ffb000 ... done
Applying EFIKA device tree fixups
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x01cf9000 -> 0x01cf9698
Device tree struct 0x01cfa000 -> 0x01cfc000
Calling quiesce ...
returning from prom_init
Using Efika machine description
Linux version 2.6.20-rc4-Efika (root@hermes) (gcc version 4.0.3 (CRUX PPC)) #0 7
arch/powerpc/platforms/52xx/efika-pci.c: PCI bus 0 controlled by /pci@80000000

Zone PFN ranges:
DMA 0 -> 32768
Normal 32768 -> 32768
HighMem 32768 -> 32768
early_node_map[1] active PFN ranges
0: 0 -> 32768
Built 1 zonelists. Total pages: 32512
Kernel command line: root=/dev/sda3 panic=30 console=ttyPSC0
MPC52xx PIC is up and running!
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124712k/131072k available (4520k kernel code, 6204k reserved, 208k data)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
MPC52xx BestComm inited
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1168617461.235:1): initialized
JFS: nTxBlock = 975, nTxLock = 7804
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler cfq registered (default)
GenerMacintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Serial: MPC52xx PSC UART driver
f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
mpc52xx-fec: tx request_irq(0x0) failed
mpc52xx-fec: probe of f0003000.ethernet failed with error -16
Fixed PHY: Registered new driver
driver_bound: device fixed@100:1 already bound
Device 'fixed@100:1' does not have a release() function, it is broken and must .
------------[ cut here ]------------
Badness at c0269e80 [verbose debug info unavailable]
Call Trace:
[C1CE9DD0] [C00080A0] show_stack+0x54/0x174 (unreliable)
[C1CE9E00] [C01FAEA0] report_bug+0x6c/0x94
[C1CE9E10] [C0010080] program_check_exception+0x118/0x500
[C1CE9E50] [C0011A98] ret_from_except_full+0x0/0x4c
--- Exception: 700 at device_release+0x58/0x6c
LR = device_release+0x58/0x6c
[C1CE9F20] [C01FC690] kobject_cleanup+0x70/0xb4
[C1CE9F40] [C01FCCC4] kref_put+0x54/0x6c
[C1CE9F50] [C01FBD60] kobject_put+0x24/0x34
[C1CE9F60] [C026A034] put_device+0x1c/0x2c
[C1CE9F70] [C045BFCC] fixed_init+0x1e0/0x218
[C1CE9FA0] [C000398C] init+0x98/0x264
[C1CE9FF0] [C00122D8] kernel_thread+0x44/0x60
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ata: MPC52xx IDE/ATA libata driver
ata1: PATA max PIO4 cmd 0x0 ctl 0xC9004A5C bmdma 0x0 irq 135
scsi0 : mpc52xx_ata
ata1.00: ATA-4, max UDMA/33, 9514260 sectors: LBA
ata1.00: ata1: dev 0 multi count 0
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA IBM-DBCA-204860 BC3O PQ: 0 ANSI: 5
SCSI device sda: 9514260 512-byte hdwr sectors (4871 MB)
sda: Write Protect is off
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPOA
SCSI device sda: 9514260 512-byte hdwr sectors (4871 MB)
sda: Write Protect is off
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPOA
sda: RDSK (512) sda1 (SWP^@)(res 2 spb 1) sda2 (LNX^@)(res 2 spb 1) sda3 (RFS^)
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbmon: debugfs is not available
ppc-of-ohci f0001000.usb: OF OHCI
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number 1
ppc-of-ohci f0001000.usb: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new interface driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
mice: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
i2c /dev entries driver
i2c-parport: adapter type unspecified
ic RTC Driver v1.07
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.6
wbsd: Copyright(c) Pierre Ossman
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18,0
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 172k init
INIT: version 2.86 booting
The system is coming up. Please wait.
/dev/sda2: clean, 14/9320 files, 9022/37200 blocks
Adding 246440k swap on /dev/sda1. Priority:-1 extents:1 across:246440k
hostname: efika
font: default
keyboard: uk
INIT: Entering runlevel: 2
starting services: coldplug net[ERROR] inetd portmap nfs sshd crond


CRUX PPC (efika) (ttyPSC0)

login: root
Password:

Greetings from the CRUX PPC team!
http://cruxppc.sunsite.dk

Last login: Fri Jan 12 15:53:31 +0100 2007 on ttyPSC0.
No mail.
# uname -a
Linux efika 2.6.20-rc4-Efika #0 Fri Jan 12 13:46:18 CET 2007 ppc GNU/Linux
# crux
CRUX PPC version 2.2
#


greetz,
The Crux PPC Team

_________________
acrux _at_ linuxmail _dot_ org
Top
   
Reply with quote  
acrux
PostPosted: Sat Jan 13, 2007 2:39 pm 
Offline

Joined: Thu Oct 19, 2006 7:19 am
Posts: 271
Location: Italy/Greece
...and with optimized Efika kernel
Code:
Using Efika machine description
Linux version 2.6.20-rc4-Efika2 (root@efika) (gcc version 4.0.3 (CRUX PPC)) #0 Sat Jan 13 03:48:13 CET 2007
Entering add_active_range(0, 0, 32768) 0 entries of 256 used
arch/powerpc/platforms/52xx/efika-pci.c: PCI bus 0 controlled by /pci@80000000

Top of RAM: 0x8000000, Total RAM: 0x8000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 32768
Normal 32768 -> 32768
HighMem 32768 -> 32768
early_node_map[1] active PFN ranges
0: 0 -> 32768
On node 0 totalpages: 32768
DMA zone: 256 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 32512 pages, LIFO batch:7
Normal zone: 0 pages used for memmap
HighMem zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 32512
Kernel command line: root=/dev/sda3 console=ttyPSC0
MPC52xx PIC is up and running!
PID hash table entries: 512 (order: 9, 2048 bytes)
time_init: decrementer frequency = 33.000000 MHz
time_init: processor frequency = 396.000000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
High memory: 0k
Memory: 124712k/131072k available (4520k kernel code, 6200k reserved, 208k data, 210k bss, 172k init)
Calibrating delay loop... 65.79 BogoMIPS (lpj=32896)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
MPC52xx BestComm inited
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1168691246.235:1): initialized
JFS: nTxBlock = 975, nTxLock = 7804
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler cfq registered (default)
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Serial: MPC52xx PSC UART driver
f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
eth0: mpc52xx-fec at 0xf0003000,<6>eth0: Phy @ 0x10, type GENERIC (0x00008201)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ata: MPC52xx IDE/ATA libata driver
ata1: PATA max PIO4 cmd 0x0 ctl 0xC9006A5C bmdma 0x0 irq 135
scsi0 : mpc52xx_ata
ata1.00: ATA-4, max UDMA/33, 9514260 sectors: LBA
ata1.00: ata1: dev 0 multi count 0
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA IBM-DBCA-204860 BC3O PQ: 0 ANSI: 5
SCSI device sda: 9514260 512-byte hdwr sectors (4871 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 9514260 512-byte hdwr sectors (4871 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: RDSK (512) sda1 (SWP^@)(res 2 spb 1) sda2 (LNX^@)(res 2 spb 1) sda3 (RFS^@)(res 2 spb 1)
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ppc-of-ohci f0001000.usb: OF OHCI
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number 1
ppc-of-ohci f0001000.usb: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new interface driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
usbcore: registered new interface driver cypress_cy7c63
mice: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
i2c /dev entries driver
i2c-parport: adapter type unspecified
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.6
wbsd: Copyright(c) Pierre Ossman
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 172k init
PCI: Enabling device 0000:00:18.0 (0000 -> 0003)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:18.0: 3Com PCI 3c905C Tornado at c9168000.
Adding 246440k swap on /dev/sda1. Priority:-1 extents:1 across:246440k
eth0: config: auto-negotiation on, 100HDX, 10HDX.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

greetz,
The Crux PPC Team

_________________
acrux _at_ linuxmail _dot_ org
Top
   
Reply with quote  
bbrv
 Post subject:
PostPosted: Sun Jan 14, 2007 5:05 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Hi CruxPPC, we would like to blog about Crux and what you have done with the EFIKA. Could you send us a picture of you hard a work with the EFIKA (how you have it set up, etc.). Also, please tell us whatever you would like us to highlight about Crux...:-) With links, etc.!

Thanks!

R&B 8-)

_________________
http://bbrv.blogspot.com
Top
   
Reply with quote  
nullpointer
PostPosted: Tue Jan 16, 2007 11:50 am 
Offline

Joined: Thu Jun 02, 2005 7:46 am
Posts: 22
Acrux has been running a demo site on the EFIKA for a couple of days or so... you can read about it and see the pictures of efika working on the site itself:
http://acrux.homelinux.org

He simply installed on a 2.5" disk through usb cable, chrooted, compiled a custom patched and fine-tuned kernel, and then moved the disk on the ide bus of the Efika.
In the near future we'll release a starter kit and we're considering two options (probably we'll produce both):
* a very trimmed system in a tar file, so it's ready to be untarred on an usb pendrive or on a flash/ide-flash, and then configured and used, or used for a more complete install on some other media.
* a live cd for ppc and a live cd for x86 with tftp server and nfs share ready, so the efika can boot the installer from net.

The kernel has been tuned for MPC5K2 based boards, not only Efika, so Crux-PPC 2.2 will [presumably] support many of them, with similar install procedures.

Well a quick update on the Crux-PPC project status...

We've been trough a not-so-bright moment for our project, as while we were deciding where to go, it wasn't quite clear where the main Crux project was going to go... plus the founder developers and/or their hardware lost interest for the project or just disappeared...

But now here we are again :)
Crux-PPC 2.2 will come with some months of delay after it's x86 counterpart, but even if the toolchain is not really the latest (glibc 2.3.6 and GCC 4.0.3), all the other packages and libs are update to the latest available, and the hardware support is wide.

Work on Crux-PPC 2.3 is going on, the toolchain will be flexible (it will allow libfreevec and/or other altivec optimizations), and we hope to release it within a month from the release of the upstream CRUX.

Right after the release of 2.2 we'll work on the services needed to support the development and the ports system of the new crux-ppc 2.3. We will use Trac+git for development and documentation and rsync for the ports tree (as the upstream CRUX does). These services will run on the servers kindly offered by EWB Italy/EWB Napoli http://www.ewb.it.

That's all for now, we hope to have more news coming soon 8)

Byez

The Crux PPC Team
Top
   
Reply with quote  
acrux
 Post subject:
PostPosted: Wed Jan 17, 2007 5:58 am 
Offline

Joined: Thu Oct 19, 2006 7:19 am
Posts: 271
Location: Italy/Greece
CRUX PPC 2.2 'll come as soon as possible after the next 2.6.20 linux kernel release.
For the moment, in about a couple of days, we'll go out with a pubblic 2.2 Release Candidate.

Stay tuned! We need testers!





greetz,
The Crux PPC Team

_________________
acrux _at_ linuxmail _dot_ org
Top
   
Reply with quote  
bbrv
 Post subject:
PostPosted: Wed Jan 17, 2007 7:07 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
You will find them here!

R&B :)

_________________
http://bbrv.blogspot.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group