Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
simone
 Post subject: efika os installation
PostPosted: Thu Dec 07, 2006 12:38 pm 
Offline

Joined: Wed Feb 08, 2006 9:20 am
Posts: 6
Location: Siena
i boot the efika with:
boot hd0:0 DI_EFIKA
my2,5 hd ha no partitions.
the hd0 is an usb pendrive.
it load the kernet and than write:
"returning from prom_init"
no more.

the boot seem to continue, the usb disk flash for a while.

i tried aros ppc, i got the same with my firegl1000 pro.
with a tnt2 it continue to boot and turn down the monitor.

is it the frame buffer?

what vga should i use?
is really the vga the problem?

my firegl1000 work on my pegasos2...

thanks
Top
   
Reply with quote  
ironfist
 Post subject:
PostPosted: Thu Dec 07, 2006 2:54 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 429
Location: Secure Networks / Sweden
Add the same boot argument for video=XXXXX:1024x768 as you used
with that card on your Pegasos.
Top
   
Reply with quote  
simone
 Post subject:
PostPosted: Thu Dec 07, 2006 3:51 pm 
Offline

Joined: Wed Feb 08, 2006 9:20 am
Posts: 6
Location: Siena
Quote:
Add the same boot argument for video=XXXXX:1024x768 as you used
with that card on your Pegasos.
i don't use any boot argument on Pegasos.
but maybe i have understood:
this is the config file of the kernel:

CONFIG_FB_OF=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_3DFX=y
CONFIG_FB_VOODOO1=y

none of my card is supported. i will get a new one.
meanwhile: can i force the installer to overpass the frame baffer? or can i make the installation by remote ssh session?
Top
   
Reply with quote  
fman
 Post subject:
PostPosted: Fri Dec 08, 2006 1:50 am 
Offline

Joined: Fri Feb 04, 2005 4:36 pm
Posts: 14
Looks like my Matrox card isn't supported either. Ideally I'd like to be able to install from the serial console and use this as a headless machine.

I've tried the usual options of console=ttyS0,115200 etc but I'm suspecting it dosn't have this compiled into the kernel.

Any chance of an updated DI_EFIKA with a few extras enabled?

Francois
Top
   
Reply with quote  
beelze
 Post subject:
PostPosted: Mon Dec 11, 2006 4:23 pm 
Offline

Joined: Mon Feb 27, 2006 4:51 pm
Posts: 11
Console is ttyPSC0

It's in the last paragraph of the EFIKA Readme Howto at http://www.efika.info
Top
   
Reply with quote  
PurpleAlien
 Post subject:
PostPosted: Mon Dec 11, 2006 4:38 pm 
Offline
Genesi

Joined: Mon Jan 30, 2006 2:28 am
Posts: 409
Location: Finland
Hi.
Quote:
Ideally I'd like to be able to install from the serial console and use this as a headless machine.
Thats exactly what I did.
The Serial console is ttyPSC0, which you give as an option to the kernel.
After installation, when you boot, you might want to stay in runlevel 1. When entering runlevel two, the output to the serial console stopped.
Anyway, what I did was install sshd in runlevel one (by passing init 1 to the kernel), and after that reboot and use ssh to do the rest...

Best regards,
Johan

_________________
Johan Dams, Genesi USA Inc.
Director, Software Engineering

Yep, I have a blog... PurpleAlienPlanet
Top
   
Reply with quote  
fman
 Post subject:
PostPosted: Tue Dec 12, 2006 10:51 pm 
Offline

Joined: Fri Feb 04, 2005 4:36 pm
Posts: 14
Thanks for pointing this out :) Will be installing Debian tonight then! Had to wait a few days as I was out of the country!

Cheers F
Top
   
Reply with quote  
bbrv
 Post subject:
PostPosted: Wed Dec 13, 2006 7:39 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
And, send us some pictures from New Zealand Francios as we want to blog about it...;-)

R&B :)

_________________
http://bbrv.blogspot.com
Top
   
Reply with quote  
Mind of Illusion
 Post subject:
PostPosted: Thu Dec 14, 2006 11:19 am 
Offline

Joined: Mon Oct 23, 2006 1:25 pm
Posts: 51
For information, if you use a cdrom with an IDE to USB adapter, it must work (it work for me, with a slim cdrom, an adaptator to standard IDE and then, an adaptator to USB).
Top
   
Reply with quote  
stellae
PostPosted: Sun Jan 14, 2007 8:35 am 
Offline

Joined: Fri Nov 17, 2006 8:02 pm
Posts: 22
Location: Paris France
Hi all,

I've set up my EFIKA system using the serial port and my MAC (iBook G4 through an FTDI chip based USB <=> serial adapter and ZTerm as terminal emulator).

Here is a screenshot.

In order to use the serial console in all runlevels in debian I suggest you simply change the settings in /etc/inittab.

default:
Code:
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
will become (assuming that you want to see the login shell through ttyPSC0 in runlevel 2):
Code:
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 115200 ttyPSC0
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
but before editing this file you must boot in runlevel 1 with the method PurpleAlien explained.
Code:
boot hd0:0 kernel_efika root=/dev/sda1 console=ttyPSC0 init 1
and boot again after modifications with:
Code:
boot hd0:0 kernel_efika root=/dev/sda1 console=ttyPSC0

...

Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting portmap daemon...Already running..
Starting MTA: exim4.
Starting internet superserver: inetd.
Starting NFS common utilities: statd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.

Debian GNU/Linux 4.0 tiny ttyPSC0

tiny login:
with kind regards,

Noël
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group