Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
lugduweb
PostPosted: Fri Sep 15, 2006 11:30 am 
Hi !

I'm getting a bit lost with all ATI drivers & tools, xorg & other stuff...
There are several ATI drivers packages. I don't know which is the good one to enable 3D on my system :

=> x11-drivers/xf86-video-ati "Ati precompiled drivers for r350, r300, r250 and r200 chipsets"
=> media-video/ati-gatos "ATI Multimedia-capable drivers for Xorg"
=> x11-drivers/ati-drivers "Ati precompiled drivers for r350, r300, r250 and r200 chipsets"
=> x11-apps/ati-drivers-extra "Ati precompiled drivers extra application"

Well... at the moment, I do not have any 3D and it seems that I'm using xf86-video-ati-6.6.1, and my xorg.conf seems correct to me. So I would like to install the good drivers but I'm not sure how to do it. And what about the gatos one ?

"glxinfo|grep renderer" gives me errors message :
Code:
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
So I've installed xorg7.1 (which was not installed at all unless I was having a GNOME working system) and I'm now trying to install "ati-drivers 8.28.8"... But I'm really not sure of what I'm doing...
My system is still working... But still no 3D.
Could someone help me on this ?
I'm really getting lost with was is working with what and how... There are so many obsolete tutorials on various systems that I don't know which one to follow for PegasosPPC.

Note :
- My Gfx card is a RADEON 8500 :
Code:
0001:01:08.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
- I use kernel 2.6.15 (because of ivtv)

My xorg.conf Device section is the following :
Code:
Section "Device"
Identifier "Card0"
### Available Driver options:
Option "EnablePageFlip" "true" # Increases performance
#Option "SWcursor" "false" # Use Software Cursor
#Option "NoAccel" "false" # Disable Hardware Acc$ #Option "AGPMode" "1" # Set AGP data transfe$ #Option "AGPFastWrite" "false" # Use AGP Fast Write, D$ #Option "RenderAccel" "true" # Hardware acceleration
#Option "DCCMode" "false" # Use querried modes f$ #Option "MonitorLayout" "TMDS" # Enable this for Apple$ ### See "man radeon" for additional options
Option "BusType" "PCI"
Driver "radeon"
# BusID "PCI:1:8:0"
EndSection


Top
   
Reply with quote  
lugduweb
 Post subject:
PostPosted: Fri Sep 15, 2006 1:43 pm 
OK.. I'm really unable to enable 3D.
I don't know what's wrong. I can't make work the both drivers.

With my current config (x11-drivers/xf86-video-ati-6.6.1), glx is not working because it's not found :

grep -e EE -e WW /var/log/Xorg.0.log
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/encodings/".
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/util/".
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic/".
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/default/".
(II) Loading extension MIT-SCREEN-SAVER
(WW) Warning, couldn't open module glx
(EE) Failed to load module "glx" (module does not exist, 0)
(WW) ****INVALID IO ALLOCATION**** b: 0xf8001000 e: 0xf80010ff correcting
(EE) end of block range 0xf7ffffff < begin 0xf8000000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) RADEON(0): config file hsync range 30-70kHz not within DDC hsync ranges.
(WW) RADEON(0): config file vrefresh range 50-160Hz not within DDC vrefresh ranges.
(WW) RADEON(0): Direct rendering disabled
Then, I can't install the other drivers (x11-drivers/ati-drivers-8-28-8)
I first have a warning at the end of emerge.
Code:
* You don't have MTRR support enabled, the direct rendering
* will not work.
Looking into Google, I found a page telling to enable this option in the kernel :
Processor and Features --->
[*] MTRR (Memory Type Range Register) support
But I did not find a way to enable that feature in my current kernel 2.6.15 :-(. It does not seem to be there...
Then the compilation fails on :
* DRM module not built
>>> Source compiled.
>>> Test phase [not enabled]: x11-drivers/ati-drivers-8.28.8

>>> Install ati-drivers-8.28.8 into /var/tmp/portage/ati-drivers-8.28.8/image/ category x11-drivers
* Installing fglrx module
install: cannot stat `fglrx.ko': No such file or directory

!!! ERROR: x11-drivers/ati-drivers-8.28.8 failed.


So... I guess I'm really struck. I don't remember having such problems with my previous install and RADEON 9250 :-(
Top
   
Reply with quote  
JoseJX
 Post subject:
PostPosted: Sat Sep 16, 2006 12:13 am 
Offline

Joined: Wed Feb 01, 2006 12:21 pm
Posts: 32
You need to do a few things. First, add radeon to your VIDEO_CARDS variable in your make.conf. This will add support for radeon cards in X.org. (You can add fbdev as well as a backup). Also, add dri as a use flag (this is required for 3D support). Next, emerge xf86-video-ati and mesa (even if you've already built them). You should now have the proper drivers for radeon with your config as you've pasted it. The ati-driver ones are really the x86 binary drivers. You don't want those. :) Gatos is a special driver for using the TV capabilities of a video card, also not what you need.
Top
   
Reply with quote  
lugduweb
 Post subject:
PostPosted: Sun Sep 17, 2006 3:58 am 
Quote:
You need to do a few things. First, add radeon to your VIDEO_CARDS variable in your make.conf. This will add support for radeon cards in X.org. (You can add fbdev as well as a backup). Also, add dri as a use flag (this is required for 3D support). Next, emerge xf86-video-ati and mesa (even if you've already built them). You should now have the proper drivers for radeon with your config as you've pasted it. The ati-driver ones are really the x86 binary drivers. You don't want those. :) Gatos is a special driver for using the TV capabilities of a video card, also not what you need.
Hi !
My current VIDEO_CARDS flags are :
VIDEO_CARDS="fbdev radeon fglrx vesa"
The "dri" use flag is enabled by default (that's what profuse tells me anyway).
I'm going to re-emerge just in case :-( [Strange but when you emerge ati-drivers, xemacs is emerged too)
Top
   
Reply with quote  
lugduweb
 Post subject:
PostPosted: Sun Sep 17, 2006 8:27 am 
I've re-emerged all... And now it works.
Very stange as I did not change any USE flag or VIDEO settings in my make.conf.
Top
   
Reply with quote  
JoseJX
 Post subject:
PostPosted: Sun Sep 17, 2006 10:57 pm 
Offline

Joined: Wed Feb 01, 2006 12:21 pm
Posts: 32
You probably didn't have them set when you built it the first time. You should use the --newuse flag with emerge to have it rebuild packages that aren't in sync with your global make.conf settings.

Glad you got it working. :)
Top
   
Reply with quote  
lugduweb
 Post subject:
PostPosted: Sun Sep 17, 2006 11:58 pm 
Thank you for your help ;-)
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group