Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
trantako
PostPosted: Fri Oct 21, 2011 12:07 pm 
Offline

Joined: Fri Oct 21, 2011 11:46 am
Posts: 5
Hi,

I have three USB hard drives. Two of them work fine with Efica MX, but one doesn't get even recognized. It is a few years old 1 TB Lacie drive. It works fine when connected to a desktop PC with Ubuntu 10.04.

I got my Efica MX just 2 days ago, and I'm using the default installation of Ubuntu 10.10.
Code:
tapani@Efica:/lib/udev/rules.d$ uname -a
Linux Efica 2.6.31.14.26-efikamx #22 Wed Sep 21 09:32:09 CDT 2011 armv7l GNU/Linux
When I put a power cord to the drive and attach a USB cable from the drive to Efica MX, I can see that the device becomes visible in the USB device list:
Code:
tapani@Efica:/lib/udev/rules.d$ lsusb
Bus 002 Device 121: ID 059f:1019 LaCie, Ltd Desktop Hard Drive
Bus 002 Device 004: ID 046d:c504 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 002 Device 003: ID 13d3:3273 IMC Networks 802.11 n/g/b Wireless LAN USB Mini-Card
Bus 002 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0b95:772a ASIX Electronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
However, it doesn't show up anywhere on the desktop, and I get this in dmesg:
Code:
tapani@Efica:/lib/udev/rules.d$ tail -f /var/log/messages
Oct 21 20:43:06 Efica kernel: [ 462.415469] usb 2-1.3: new high speed USB device using fsl-ehci and address 107
Oct 21 20:43:06 Efica kernel: [ 462.526854] usb 2-1.3: configuration #1 chosen from 1 choice
Oct 21 20:43:06 Efica kernel: [ 462.560470] scsi103 : SCSI emulation for USB Mass Storage devices
Oct 21 20:43:11 Efica kernel: [ 467.566392] scsi 103:0:0:0: Direct-Access ST310003 33AS PQ: 0 ANSI: 2 CCS
Oct 21 20:43:11 Efica kernel: [ 467.567930] sd 103:0:0:0: Attached scsi generic sg1 type 0
Oct 21 20:43:11 Efica kernel: [ 467.635742] sd 103:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Oct 21 20:43:11 Efica kernel: [ 467.695088] sd 103:0:0:0: [sdb] Write Protect is off
Oct 21 20:43:12 Efica kernel: [ 467.785425] sdb: sdb1 sdb2
Oct 21 20:43:12 Efica kernel: [ 467.995136] sd 103:0:0:0: [sdb] Attached SCSI disk
Oct 21 20:43:20 Efica kernel: [ 476.095472] usb 2-1.3: reset high speed USB device using fsl-ehci and address 107
Oct 21 20:43:28 Efica kernel: [ 484.095420] usb 2-1.3: reset high speed USB device using fsl-ehci and address 107
Oct 21 20:43:59 Efica kernel: [ 515.035965] sd 103:0:0:0: Device offlined - not ready after error recovery
Oct 21 20:43:59 Efica kernel: [ 515.036014] sd 103:0:0:0: [sdb] Unhandled error code
Oct 21 20:43:59 Efica kernel: [ 515.036025] sd 103:0:0:0: [sdb] Result: hostbyte=0x05 driverbyte=0x00
Oct 21 20:43:59 Efica kernel: [ 515.036273] sd 103:0:0:0: [sdb] Unhandled error code
Oct 21 20:43:59 Efica kernel: [ 515.036284] sd 103:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
So, something goes wrong and a reset occurs. This happens over and over again, if I keep the cables connected...

I found something a little bit similar from launchpad: https://bugs.launchpad.net/ubuntu/+sour ... bug/499881. Yet, according to dpkg --list I don't even have linux-fsl-imx51 installed.

I tried to file a new bug in launchpad, but ubuntu-bug tool failed because Efica MX is using a customized version of Ubuntu.

So, any ideas?
Top
   
Reply with quote  
PurpleAlien
 Post subject:
PostPosted: Fri Oct 21, 2011 3:01 pm 
Offline
Genesi

Joined: Mon Jan 30, 2006 2:28 am
Posts: 409
Location: Finland
Hi.

There will be a new kernel out soon which should fix this issue and a few others.


Johan.

_________________
Johan Dams, Genesi USA Inc.
Director, Software Engineering

Yep, I have a blog... PurpleAlienPlanet
Top
   
Reply with quote  
trantako
 Post subject:
PostPosted: Sat Oct 22, 2011 2:11 pm 
Offline

Joined: Fri Oct 21, 2011 11:46 am
Posts: 5
That's great.

For now, I solved it by swapping the hard drives between their cases (of course the one I needed to work was the one that didn't).
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Oct 25, 2011 12:25 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
That's great.

For now, I solved it by swapping the hard drives between their cases (of course the one I needed to work was the one that didn't).
Give me an email address and I can send you a test kernel to see if that drive will work. I don't think the fix in Launchpad is at all the same thing but I added your vendor and device id to the fix and we'll see if it really is..

_________________
Matt Sealey
Top
   
Reply with quote  
Smooth
 Post subject:
PostPosted: Fri Jan 13, 2012 2:48 am 
Offline

Joined: Thu Jan 12, 2012 11:58 pm
Posts: 3
I suspect the case is bad, return it and but the new one.I have put together dozens of these things, and I've had a couple that were dead.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group