Power Developer • Transforming Smartop on a Kiosk

Unanswered topics | Active topics

Board index » »

All times are UTC-06:00

Transforming Smartop on a Kiosk

Post new topic Reply to topic

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

tuxbrain

Post subject: Transforming Smartop on a Kiosk

PostPosted: Sat May 28, 2011 2:24 am

Offline

Joined: Fri May 27, 2011 4:30 pm
Posts: 10

I need to just start X with firefox without anything else but maybe a screensaver, my first atempt on disabling /etc/rcS.d/S70x11-common and adding startx firefox at the end (but before exit 0) on /etc/rc.local has result on a pretty black screen and blocked system.

Any clue on how to achive my goal?

Top

Profile

Reply with quote

PurpleAlien

Post subject:

PostPosted: Sat May 28, 2011 4:59 am

Offline

Genesi

Joined: Mon Jan 30, 2006 2:28 am
Posts: 409
Location: Finland

Hi.

The way I usually do these things is install some minimal window manager like AEWM (http://www.red-bean.com/decklin/aewm/) and write a script to start whatever you need.

I created the following script for Chromium, but you should be able to adapt it for Firefox. It is called chromium.sh and resides in /root in this example.

Code:

#!/bin/bash

ARG=$1

if [ "$ARG" = "start" ]

then

       echo "  starting chromium..."

       echo $$ > /var/run/chromium.pid

       #run xinit in a loop to respawn the desktop if killed

       while [ -f "/var/run/chromium.pid" ]; do

               xinit /root/chromium.sh &> /dev/null

               sleep 1

       done

       rm -f /var/run/chromium.pid

else if [ "$ARG" = "stop" ]

       then

               rm -f /var/run/chromium.pid

               killall X

       else

               shift

               echo -e $$ > /var/run/chromium.pid

               #call chromium

               /usr/bin/chromium &

               #run aewm as window manager

               aewm -1 "aemenu --switch" -2 "aemenu --switch" -3 "aemenu --switch"

       fi

fi

Which you can then run from rc.local:

Code:

/root/chromium.sh start &

By the way, Chromium might be a better choice than Firefox since it appears to be a lot faster.

Johan.

_________________
Johan Dams, Genesi USA Inc.
Director, Software Engineering

Yep, I have a blog... PurpleAlienPlanet

Top

Profile

Reply with quote

tuxbrain

Post subject:

PostPosted: Sun May 29, 2011 6:56 pm

Offline

Joined: Fri May 27, 2011 4:30 pm
Posts: 10

Thanks for the reply , I selected firefox due the R-Kiosk plugin do what I was looking for and it's enough quick for may taste, but I take note on chromium

but something still doesn't work
I have desisntalled gdm ,
I have renamed /etc/rcS.d/S70x11-common to /etc/rcS.d/s70x11-common
and I try your aproach modifiying the script that way:
/root/kiosk.sh

Code:

#!/bin/bash

ARG=$1

if [ "$ARG" = "start" ]

then

       echo "  starting kiosk..."

       echo $$ > /var/run/kiosk.pid

       #run xinit in a loop to respawn the desktop if killed

       while [ -f "/var/run/kiosk.pid" ]; do

               xinit /root/kiosk.sh &> /dev/null

               sleep 1

       done

       rm -f /var/run/kiosk.pid

else if [ "$ARG" = "stop" ]

       then

               rm -f /var/run/kiosk.pid

               killall Xorg

       else

               shift

               echo -e $$ > /var/run/kiosk.pid

               #run gnome as window manager

               /usr/bin/gnome-wm &

	       sleep 1

               DISPLAY=:0.0 /usr/bin/firefox &

       fi

fi

and add
/root/kiosk.sh start &
at the end of /etc/rc.local (just before exit 0)

But the result is an endless loop of trying to start X,

I have even simplified the whole thing creating a script
like this
/root/kiosk2.sh

Code:

/usr/bin/gnome-wm &

DISPLAY=:0.0 /usr/bin/firefox 

and add to rc.local

Code:

xinit /root/kiosk2.sh &

with same result but of course in this case it just try once,

But the most curious of all this is that

running "xinit /root/kiosk2.sh &" from a terminal works! but it doesn't work form rc.local
What the &%&/( I'm missing?

here is the full copy of my rc.local

Code:

#!/bin/sh -e

#

# rc.local

#

# This script is executed at the end of each multiuser runlevel.

# Make sure that the script will "exit 0" on success or any other

# value on error.

#

# In order to enable or disable this script just change the execution

# bits.

#

# By default this script does nothing.

machine=$(grep "^Hardware" /proc/cpuinfo | sed 's/Hardware\s*:\s*//')

case "$machine" in

	"Genesi Efika MX (Smartbook)")

		board=efikasb

	;;

	"Genesi Efika MX (Smarttop)")

		board=efikamx

	;;

esac

if [ "${board}" = "efikamx" ]; then

	if [ -f /sys/class/graphics/fb0/audio ]; then

		modprobe snd-spdif

		modprobe snd-soc-imx-3stack-sgtl5000

	else

		modprobe snd-soc-imx-3stack-sgtl5000

		modprobe snd-spdif

	fi

else

	modprobe snd-soc-imx-3stack-sgtl5000

fi

su -

xinit /root/kiosk.sh &

exit 0

Top

Profile

Reply with quote

PurpleAlien

Post subject:

PostPosted: Mon May 30, 2011 2:55 am

Offline

Genesi

Joined: Mon Jan 30, 2006 2:28 am
Posts: 409
Location: Finland

Hi.

Two things:

1) remove the & from "DISPLAY=:0.0 /usr/bin/firefox &"

2) in rc.local, put "/root/kiosk.sh start" instead of " xinit /root/kiosk.sh & " (make sure kiosk.sh is executable)

Just tried it quickly here on my netbook and it works.

Johan.

_________________
Johan Dams, Genesi USA Inc.
Director, Software Engineering

Yep, I have a blog... PurpleAlienPlanet

Top

Profile

Reply with quote

Post new topic Reply to topic

Page 1 of 1

[ 4 posts ]

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum