Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
lord_spider
 Post subject: IKARUS low level console
PostPosted: Tue Sep 08, 2009 10:01 am 
Offline

Joined: Sun Oct 21, 2007 1:30 pm
Posts: 9
Location: Poland
Hi, after powering my Pegasos I (April 2 fix) there's no activity, only the serial output shows the following debug info:
Code:
Pegasos Boot Strap (c) 2002 bplan GmbH
Running on CPU PVR:00083311
PLL setting : 00000003
Enable L1 ICache... Done.
Setting ROM Defaults... Done.
Configuring SDRAM...
08000000
SDRAM Config Error :
80000000,00000058
Delaying...Done.
RAMSIZE = 08000000
00000000
Reading W83194 : 78FFFFFFFFFFFF00 Done.
Setting Front Side Bus to 100MHz... Done.
Releasing IDE reset ... Done.
Configuring Legacy Devices
Initializing KBD... Done.
PLL setting : 00000003
08000000
FAILED.
ADR : 00000000
VAL : 00800000
00000000 : 00800000 00000004 00800008 0000000C
00000010 : 00800010 00000014 00800018 0000001C
00000020 : 00800020 00000024 00800028 0000002C
00000030 : 00800030 00000034 00800038 0000003C
00000040 : 00800040 00000044 00800048 0000004C
00000050 : 00800050 00000054 00800058 0000005C
00000060 : 00800060 00000064 00800068 0000006C
00000070 : 00800070 00000074 00800078 0000007C
00000080 : 00800080 00000084 00800088 0000008C
00000090 : 00800090 00000094 00800098 0000009C
000000A0 : 008000A0 000000A4 008000A8 000000AC
000000B0 : 008000B0 000000B4 008000B8 000000BC
000000C0 : 008000C0 000000C4 008000C8 000000CC
000000D0 : 008000D0 000000D4 008000D8 000000DC
000000E0 : 008000E0 000000E4 008000E8 000000EC
000000F0 : 008000F0 000000F4 008000F8 000000FC

Entering IKARUS low level console

>
Any ideas what's wrong with my Peg?

_________________
Peg2 G4@1133 / 512 MB / Radeon 9200 128 MB / 80 GB / DVD+RW / SB Live!
Top
   
Reply with quote  
SoundSquare
 Post subject:
PostPosted: Tue Sep 08, 2009 10:14 am 
Offline

Joined: Sun May 08, 2005 8:46 pm
Posts: 559
Location: Paris
Quote:
SDRAM Config Error :
have u tried with another sdram module ?
Top
   
Reply with quote  
lord_spider
 Post subject:
PostPosted: Tue Sep 08, 2009 10:54 am 
Offline

Joined: Sun Oct 21, 2007 1:30 pm
Posts: 9
Location: Poland
Quote:
Quote:
SDRAM Config Error :
have u tried with another sdram module ?
Yes, with 4 different modules (2 of them were 256 MB modules, one was 64 MB and one 128 MB, which was inside the Peg from the beginning and should be working).

When 2 modules are inserted, e.g. 64 MB and 128 MB, there's no SDRAM Config Error in the debug info, but the lines:

PLL setting : 00000003
08000000
FAILED.

are still there.

_________________
Peg2 G4@1133 / 512 MB / Radeon 9200 128 MB / 80 GB / DVD+RW / SB Live!
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Sep 08, 2009 2:54 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
Quote:
SDRAM Config Error :
have u tried with another sdram module ?
Yes, with 4 different modules (2 of them were 256 MB modules, one was 64 MB and one 128 MB, which was inside the Peg from the beginning and should be working).

When 2 modules are inserted, e.g. 64 MB and 128 MB, there's no SDRAM Config Error in the debug info, but the lines:

PLL setting : 00000003
08000000
FAILED.

are still there.
Looks like your Articia is dead, if it's not the RAM.

_________________
Matt Sealey
Top
   
Reply with quote  
lord_spider
 Post subject:
PostPosted: Tue Sep 08, 2009 8:16 pm 
Offline

Joined: Sun Oct 21, 2007 1:30 pm
Posts: 9
Location: Poland
Quote:
Looks like your Articia is dead, if it's not the RAM.
I suppose such a defect can't be fixed?

_________________
Peg2 G4@1133 / 512 MB / Radeon 9200 128 MB / 80 GB / DVD+RW / SB Live!
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Sep 08, 2009 9:48 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
Looks like your Articia is dead, if it's not the RAM.
I suppose such a defect can't be fixed?
You could send it to bplan and see what they can do..

_________________
Matt Sealey
Top
   
Reply with quote  
lord_spider
 Post subject:
PostPosted: Wed Sep 09, 2009 6:27 am 
Offline

Joined: Sun Oct 21, 2007 1:30 pm
Posts: 9
Location: Poland
Quote:

You could send it to bplan and see what they can do..
Who's the best contact person at bplan regarding Pegasos?

_________________
Peg2 G4@1133 / 512 MB / Radeon 9200 128 MB / 80 GB / DVD+RW / SB Live!
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Wed Sep 09, 2009 7:28 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:

You could send it to bplan and see what they can do..
Who's the best contact person at bplan regarding Pegasos?
http://www.bplan-gmbh.de/index.php?PAGE_ID=144

_________________
Matt Sealey
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group