Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 3 of 4
  [ 52 posts ] 
  Print view Previous topic | Next topic 
Author Message
michalsc
 Post subject:
PostPosted: Tue Feb 17, 2009 10:24 am 
Offline

Joined: Mon Dec 05, 2005 7:23 am
Posts: 32
Location: Germany
Quote:
And before you ask me to set the partition bootable: it was set bootable by the MorphOS installer, and this is also found by linux parted:
Wait. Have you tried to boot aros from ATA drive? Not from USB stick? In the second log provided by you I see one USB hub and a keyboard, but no USB mass storage?

You cannot boot AROS on efika from ATA drive right now. What needs to be tested is ability to use an USB stick/USB CD drive on AROS.

_________________
Michal Schulz
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 17, 2009 10:32 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
Ooops. I tried the HDD, as I always consider USB sticks fat32 only. Well, not always, but once upon a time, when I told Matt, that fat32 in the firmware is completely broken and we should use ext2/ext3, which works, he told me to stick to fat32, which is also accessible from Windows machines. And somehow I forgot, that other filesystems could work on a USB stick :-)

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Feb 17, 2009 10:57 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1594
Location: Austin, TX
Quote:
Ooops. I tried the HDD, as I always consider USB sticks fat32 only. Well, not always, but once upon a time, when I told Matt, that fat32 in the firmware is completely broken and we should use ext2/ext3, which works, he told me to stick to fat32, which is also accessible from Windows machines. And somehow I forgot, that other filesystems could work on a USB stick :-)
That was in the context of "what filesystem should we base boot media on". In the interest of not driving end-users insane by requiring they boot Linux to install Linux (argh :) most people have a Windows system laying around they can access a FAT32 stick on and drop files here and there.

In terms of AROS, MorphOS is your best route in, and no doubt a lot of people who are testing it (or more precisely, seem not to be) are running MorphOS too.

_________________
Matt Sealey
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 17, 2009 11:01 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
On screen it stops loading with the same line. On the serial console it looks a bit different. Here is a full log:
Code:

EFIKA 5200B Kernel build on Feb 10 2009
[KRN] BootMsg @ 0x19111e4
[KRN] Copying TagList and data
[KRN] CmdLine: 'bootdelay=3 '
[KRN] Initializing exception handlers
[KRN] Initializing MMU
[KRN] Location of MMU tables: 07000000-070fffff
[KRN] SDR1 = 0700000f
[KRN] Flushing TLB
[KRN] MBAR at f0000000
[KRN] HID0=0010c000 HID1=40000000
[KRN] Entering ictl_init.
[KRN] Stopping all interrupt activities
[KRN] Mapping 00003000-06ffffff range for public use
[KRN] mmu_map_area(000000003000, 00003000, 06ffd000, 0012)
[KRN] Mapping f0000000-f002fffc range for MBAR
[KRN] mmu_map_area(0000f0000000, f0000000, 0000c000, 002a)
[KRN] Mapping ff100000-ff124fff range for public read-only access
[KRN] mmu_map_area(0000ff100000, 07100000, 00025000, 0011)
[KRN] Mapping ff125000-ff7f2fff range for supervisor
[KRN] mmu_map_area(0000ff125000, 07125000, 006ce000, 0010)
[KRN] Mapping ff7f3000-ff7fffff range for read-write
[KRN] mmu_map_area(0000ff7f3000, 077f3000, 0000d000, 0012)
[KRN] Mapping ff800000-ff972fff range for read-only
[KRN] mmu_map_area(0000ff800000, 07800000, 00173000, 0013)
[KRN] Mapping ff973000-ffffffff range for supervisor
[KRN] mmu_map_area(0000ff973000, 07973000, 0068d000, 0010)
[KRN] Supervisor mem: 6967KB free
[exec] AROS for Efika5200B - The AROS Research OS
[exec] Preparing the ExecBase...
[exec] ExecBase at 000032c0
[exec] Clearing ExecBase
[exec] Initializing library...
[exec] Adding memory
[exec] Done. SysBase->ThisTask = 0x004180
[exec] Resident modules (addr: pri version name):
[exec] + 0xff810bd8: 127 2 "kernel.resource"
[exec] + 0xff811ff8: 126 41 "exec.library"
[exec] + 0xff83a1b0: 110 41 "expansion.library"
[exec] + 0xff8fe30c: 104 1 "partition.library"
[exec] + 0xff849738: 103 41 "utility.library"
[exec] + 0xff837c50: 102 41 "aros.library"
[exec] + 0xff90b224: 102 0 "openfirmware.resource"
[exec] + 0xff81ab7c: 101 40 "mathieeesingbas.library"
[exec] + 0xff90939c: 100 41 "bootloader.resource"
[exec] + 0xff9028a4: 94 41 "oop.library"
[exec] + 0xff8f93dc: 92 1 "hiddclass.hidd"
[exec] + 0xff81f0f8: 90 1 "i2c.hidd"
[exec] + 0xff8bc72c: 90 1 "pci.hidd"
[exec] + 0xff90f780: 90 1 "irq.hidd"
[exec] + 0xff90e568: 89 1 "pci-efika.hidd"
[exec] + 0xff8735a8: 65 41 "graphics.library"
[exec] + 0xff8f7ecc: 60 41 "layers.library"
[exec] + 0xff90c9bc: 50 41 "timer.device"
[exec] + 0xff81faec: 45 41 "misc.resource"
[exec] + 0xff921cf8: 45 41 "battclock.resource"
[exec] + 0xff83bb3c: 44 41 "keyboard.device"
[exec] + 0xff8464d4: 44 41 "gameport.device"
[exec] + 0xff839050: 40 41 "keymap.library"
[exec] + 0xff8ea1e4: 30 41 "input.device"
[exec] + 0xff8ac3dc: 10 50 "intuition.library"
[exec] + 0xff876878: 8 41 "cybergraphics.library"
[exec] + 0xff8b2a9c: 4 41 "console.device"
[exec] + 0xff836820: 0 1 "graphics.hidd"
[exec] + 0xff920518: -1 1 "radeon.hidd"
[exec] + 0xff94bae0: -10 0 "usb.hidd"
[exec] + 0xff928bfc: -15 0 "hid.hidd"
[exec] + 0xff93ec68: -15 0 "storage.hidd"
[exec] + 0xff9327b8: -20 0 "ohci.hidd"
[exec] + 0xff906fe0: -50 41 "Boot Strap"
[exec] + 0xff8b7b50: -120 44 "workbench.library"
[exec] + 0xff8d666c: -120 41 "dos.library"
[exec] + 0xff8e6e94: -122 1 "cdrom.handler"
[exec] + 0xff957688: -122 41 "afs.handler"
[exec] + 0xff9705ec: -122 1 "sfs.handler"
[exec] + 0xff8d71c8: -125 41 "LDDemon"
[exec] + 0xff818580: -126 1 "packet.handler"
[exec] + 0xff843488: -126 41 "con.handler"
[exec] + 0xff847398: -127 41 "nil.handler"
[exec] + 0xff8eff2c: -128 1 "amberram.handler"
[exec] InitCode(RTF_SINGLETASK)
enter InitCode(0x2, 0)
calling InitResident("kernel.resource", NULL)
[KRN] Kernel resource post-exec init.
[KRN] Interrupts enabled
[KRN] Entered user mode
calling InitResident("expansion.library", NULL)
leave InitCode(0x2, 0)
[exec] InitCode(RTF_COLDSTART)
enter InitCode(0x1, 0)
calling InitResident("partition.library", NULL)
calling InitResident("utility.library", NULL)
calling InitResident("aros.library", NULL)
calling InitResident("openfirmware.resource", NULL)
[OF] OpenFirmware_Init
[OF] BootInto @ ff7ffc20
[OF] OpenFirmware root at ff100000
calling InitResident("mathieeesingbas.library", NULL)
calling InitResident("bootloader.resource", NULL)
[BootLdr] Init. msg=0xff7ffc20
[BootLdr] KRN_CmdLine=0xff1242bc
[BootLdr] CmdLine="bootdelay=3 "
[BootLdr] Init: Argument bootdelay=3
calling InitResident("oop.library", NULL)
calling InitResident("hiddclass.hidd", NULL)
calling InitResident("i2c.hidd", NULL)
[I2C] Init
calling InitResident("pci.hidd", NULL)
[PCI] Initializing PCI system
[PCIDriver] Dummy Driver initialization
[PCI] base class initialization
[PCI] Everything OK
calling InitResident("irq.hidd", NULL)
calling InitResident("pci-efika.hidd", NULL)
[PCI_Efika] Driver initialization
[PCI_Efika] OpenFirmwareBase = 000060f0
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[PCI_Efika] MBAR located at f0000000
[PCI_Efika] PCITBATR0 = f0000000
[PCI_Efika] PCITBATR1 = 00000001
[PCI_Efika] PCIIW0BTAR = 803f8000
[PCI_Efika] PCIIW1BTAR = f8000000
[PCI_Efika] PCIIW2BTAR = f9000000
[PCI_Efika] PCIIWCR = 01090000
[PCI_Efika] PCIICR = 00000000
[PCI_Efika] PCI MEM: 80000000 - bfffffff
[PCI_Efika] PCI IO: f8000000 - f8ffffff
[KRN] KrnMapGlobal(f8000000->f8000000 00010000 0305)
[KRN] mmu_map_area(0000f8000000, f8000000, 00010000, 003a)
[PCI_Efika] Adding Driver to main the class OK
[PCI] Adding Driver class 0x00007844
[PCI] Adding driver PCINative (Efika5200 native direct access PCI driver) to the system
[PCI] Scanning bus 0
[PCIDevice] 00.10.0 = 1002:5960 (Video PC Compatible VGA)
[PCIDevice] 00.10.1 = 1002:5940 (Video Other )
[PCIDevice] 00.1c.0 = 1057:5809 (Bridge Other )
[PCI_Efika] All OK
calling InitResident("graphics.library", NULL)
calling InitResident("layers.library", NULL)
calling InitResident("timer.device", NULL)
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[KRN] KrnAddIRQHandler(04, 0x00ff90be40, 0x000003c0d0, 0x00000032c0):
[KRN] handle=0x00ff1251e0
[KRN] Enabling main irq 4.
[KRN] CPMIM=00000fff PIM=ffffff00
[KRN] PMCE=00000001 PIS=00000000
calling InitResident("misc.resource", NULL)
calling InitResident("battclock.resource", NULL)
calling InitResident("keyboard.device", NULL)
calling InitResident("gameport.device", NULL)
calling InitResident("keymap.library", NULL)
calling InitResident("input.device", NULL)
calling InitResident("intuition.library", NULL)
calling InitResident("cybergraphics.library", NULL)
calling InitResident("console.device", NULL)
[exec] NewAddTask with unaligned stack pointer! fixing 0006d094->0006d090
calling InitResident("graphics.hidd", NULL)
calling InitResident("radeon.hidd", NULL)
[ATI] Init
[ATI] Enumerator: checking productid 5960 vendorid 1002 00009a34
[ATI] Enumerator: found productid 5960 vendorid 1002 masked_check 0
[KRN] KrnMapGlobal(80000000->80000000 08000000 0305)
[KRN] mmu_map_area(000080000000, 80000000, 08000000, 003a)
[ATI] Got framebuffer @ 80000000 (size=128MiB)
[KRN] KrnMapGlobal(88000000->88000000 00010000 0305)
[KRN] mmu_map_area(000088000000, 88000000, 00010000, 003a)
[ATI] Got registers @ 88000000 (size=64KiB)
[ATI] RomBase provided by ATI card: 88020000
[KRN] KrnMapGlobal(88020000->88020000 00020000 0305)
[KRN] mmu_map_area(000088020000, 88020000, 00020000, 003a)
[ATI] Got BIOS @ 88020000 (size=128KiB)
[ATIBMP] Bitmap at 0x6f7f0, size 16384 bytes (131072 bits)
[ATI] Video BIOS not detected in PCI space!
[ATI] Attempting to read Video BIOS using openfirmware
[OF] OpenKey('/pci/display')
[OF] looking for child 'pci'
[OF] looking for child 'display'
[ATI] OF reported BIOS at ff103f0c
[ATI] Legacy BIOS detected
[ATI] Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-4
[ATI] Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
[KRN] IdleTask entered
[KRN] CPU usage: 79.3
[ATI] Usable size: 131072KB
.
[ATI] Enumerator found a card (ProductID=5960)
[ATI] The card is supported
calling InitResident("usb.hidd", NULL)
[USB] USB Init
[USB] Process starter
calling InitResident("hid.hidd", NULL)
[USB] USB::New()
[USB] USB::New() = 0x78e64
[USB] USB::AddClass("hid.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
calling InitResident("storage.hidd", NULL)
[MSS] USB Mass Storage Init.
[MSS] Init done.
[USB] USB::New()
[USB] USB::New() = 0x7b1c4
[USB] USB::AddClass("storage.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
[MSS] USB Mass Storage device layer init
calling InitResident("ohci.hidd", NULL)
[OHCI_MPC5200B] OHCI_Init()
[USB] USB::New()
[USB] USB::New() = 0x7d524
[OF] OpenKey('/builtin/usb')
[OF] looking for child 'builtin'
[OF] looking for child 'usb'
[OHCI_MPC5200B] HC @ f0001000
[OHCI_MPC5200B] 2-port Device 1 @ 0007d5b4 with MMIO @ f0001000
[OHCI_MPC5200B] Done. OHCI devices found: 1
[OHCI] InitClass
[OHCI] Initializing driver object: dev=0, drv=0x7d5b4, 2 ports @ 0xf0001000
[OHCI] OHCI::New()
[USB] USBDevice::New()
[USBDevice::New] Address=01, Interface=00, Bus=0, Hub=0
[USBDevice::New] Device 0000:0000 09/00/00 at address 00000000:01
[USBDevice::New] Default LangID=0409
[USBDevice::New] iProduct = "OHCI Root HUB"
[USBDevice::New] iManufacturer = "The AROS Development Team"
[USBDevice::New] iSerial = "0000.0017"
[USB] USBDevice::New() = 0x7d654
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[KRN] KrnSetProtection(00081000, 00081fff, 003a)
[KRN] KrnAddIRQHandler(1b, 0x00ff92b96c, 0x0000082400, 0x00ff7f4100):
[KRN] handle=0x00ff125c20
[KRN] Enabling peripheral irq 27.
[KRN] CPMIM=00000fff PIM=fdffff00
[KRN] PMCE=00000001 PIS=00000000
[OHCI] IRQHandler = 00082400 int = 27
[OHCI] New(): o=0x7d654, ports=2, regs=0xf0001000, drv=0x7d5b4, dev=0, hcca=0x81000
[KRN] KrnSetProtection(00085000, 00085fff, 003a)
[OHCI] ctl=000000b4 fm=27782edf desca=02001202 descb=00000000
[OHCI] Initial setup
[OHCI] ival=00002edf
[OHCI] fm=a7782edf
[OHCI] periodic start=00002a2f
[OHCI] delay=4
[OHCI] OHCI controller up and running.
[OHCI] OHCI::New() = 0x7d654
[USB] USB::AttachDriver(0x7d654)
[KRN] CPU usage: 19.2
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x09
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0040
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] USBDevice::New()
[USBDevice::New] Address=02, Interface=00, Bus=0x7d654, Hub=0x7d654
[USBDevice::New] Device 0608:05e3 09/00/00 at address 0007d654:02
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB2.0 Hub"
[USB] USBDevice::New() = 0x86464
[USB] Descriptor dump:
[USB] bLength = 9
[USB] bDescriptorType = 41 (Hub)
[USB] bNbrPorts = 4
[USB] wHubCharacteristics = 0x00e9
[USB] bPwrOn2PwrGood = 100 ms
[USB] bHubContrCurrent = 100
[USB] DeviceRemovable = 00ff000000000000000000000000000000000000000000000000000000000000
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 25
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x790b6 end=0x790bd len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x790b6
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[OHCI] Best node (0 uses) 0 from 32
[KRN] CPU usage: 15.9
calling InitResident("Boot Strap", NULL)
[Boot] delay of 3 seconds requested.[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0008
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] USBDevice::New()
[USBDevice::New] Address=03, Interface=00, Bus=0x7d654, Hub=0x86464
[USBDevice::New] Device c01b:046d 00/00/00 at address 0007d654:03
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB-PS/2 Optical Mouse"
[USBDevice::New] iManufacturer = "Logitech"
[USB] USBDevice::New() = 0x89084
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 34
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x79146 end=0x79156 len=9 type=33
[USBDevice] fill_iface: p=0x7914f end=0x79156 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x7914f
[HID] hid_maxrepid(0x89414,64)
[HID] ReportID=0
[HID] ReportID=0
[HID] ReportID=0
[HID] ReportID=0
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 5
[USB] bInterval = 10
[OHCI] Best node (0 uses) 0 from 8
[HID] hid_maxrepid(0x89474,64)
[HID] ReportID=0
[HID] ReportID=0
[HID] ReportID=0
[HID] ReportID=0
[KRN] CPU usage: 13.8
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0040
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] Trying external class "storage.hidd"
[MSS] MatchCLID(0x88da5, 0x790f4)
[MSS] UDCLASS_IN_INTERFACE OK. Checking interface 0
[MSS] iface 0 @ 0x790fd class 8 subclass 6 protocol 80
[MSS] Interface may be handled by Mass Storage Class
[MSS] Lucky you. The device supports Bulk Only transport
[MSS] Protocol used: SCSI complete
[MSS] Pick me! Pick me! Pick me! I can handle it!
[MSS] Storage::New()
[USB] USBDevice::New()
[USBDevice::New] Address=04, Interface=00, Bus=0x7d654, Hub=0x86464
[USBDevice::New] Device 1d00:13fe 00/00/00 at address 0007d654:04
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "DataTraveler 2.0"
[USBDevice::New] iManufacturer = "Kingston"
[USBDevice::New] iSerial = "5B7110927C07"
[USB] USBDevice::New() = 0x8df04
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 32
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=2
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x791f6 end=0x79204 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x791f6
[USBDevice] fill_iface: endpt=1
[USBDevice] fill_iface: p=0x791fd end=0x79204 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x791fd
[MSS] Getting device descriptor
[MSS] Getting initial config descriptor
[OHCI] !!!TIMEOUT!!!
[MSS] GetMaxLUN FAILED.
[MSS] GetMaxLUN returns 0
[MSS] Getting config descriptor of size 32
[MSS] Getting descriptor of interface 0
[MSS] Interface has 2 endpoints
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 02
[USB] wMaxPacketSize = 64
[USB] bInterval = 0
[MSS] endpoint 0: addr 81, interval 00, length 07 attr 02 maxpacket 0040
[MSS] IN endpoint found
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 02
[USB] bmAttributes = 02
[USB] wMaxPacketSize = 64
[USB] bInterval = 0
[MSS] endpoint 1: addr 02, interval 00, length 07 attr 02 maxpacket 0040
[MSS] OUT endpoint found
[MSS] GetUnitFromCache(1d00:13fe, 'Kingston', 'DataTraveler 2.0', '5B7110927C07')
[MSS] GetUnitFromCache(1d00:13fe, 'Kingston', 'DataTraveler 2.0', '5B7110927C07')
[MSS] Unit is new to the system. Creating new cache object
[USB MSS 00.0] Good morning!
[USB MSS 00.0] Inquiry results: 00 80 00 01 1f 00 00 00
[USB MSS 00.0] TestUnitReady NOT OK
[USB MSS 00.0] Unit is not ready. No media present.
[MSS] dos.library is not yet up. Add a BootNode then.
[MSS] Storage::New() = 0x8df04
[KRN] CPU usage: 25.3
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0110
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0008
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] USBDevice::New()
[USBDevice::New] Address=05, Interface=00, Bus=0x7d654, Hub=0x86464
[USBDevice::New] Device 0116:04f2 00/00/00 at address 0007d654:05
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB Keyboard"
[USBDevice::New] iManufacturer = "CHICONY"
[USB] USBDevice::New() = 0x90cf4
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 34
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x79286 end=0x79296 len=9 type=33
[USBDevice] fill_iface: p=0x7928f end=0x79296 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x7928f
[HID] hid_maxrepid(0x894f4,65)
[HID] ReportID=0
[HID] ReportID=0
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 8
[USB] bInterval = 10
[OHCI] Best node (0 uses) 1 from 8
[KRN] CPU usage: 12.4
[MSS-dev] Open(0x93b90, 0, 0)
[MSS-dev] found unit 0 at 0x7b2e4
enter InitCode(0x4, 0)
calling InitResident("cdrom.handler", NULL)
calling InitResident("afs.handler", NULL)
calling InitResident("sfs.handler", NULL)
calling InitResident("LDDemon", NULL)
calling InitResident("packet.handler", NULL)
calling InitResident("con.handler", NULL)
calling InitResident("nil.handler", NULL)
calling InitResident("amberram.handler", NULL)
leave InitCode(0x4, 0)
[dos] Opening 'fat.handler'... [dos] Opening 'devs/fat.handler'... [dos] Opening 'devs:fat.handler'.
.. [dos] Opening 'fat.handler'... [dos] Opening 'DEVS:fat.handler'... [dos] Opening 'DEVS:Filesystem
s/fat.handler'... [dos] Opening 'DEVS:Handlers/fat.handler'... [packet] couldn't open fat.handler
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packet.
handler'... No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[USB MSS 00.0] Unit was not ready. Requesting sense.
[USB MSS 00.0] Sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 00 00
[KRN] CPU usage: 8.4
[USB] Process starter: dos.library up and running
[USB] Process starter: Creating the main USB process
[KRN] CPU usage: 0.5
[USB MSS 00.0] Unit was not ready. Requesting sense.
[USB MSS 00.0] Sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 00 00
[KRN] CPU usage: 0.4
[KRN] CPU usage: 0.1
[USB MSS 00.0] Unit was not ready. Requesting sense.
[USB MSS 00.0] Sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 00 00
[KRN] CPU usage: 0.4
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 0.4
[USB MSS 00.0] Unit was not ready. Requesting sense.
[USB MSS 00.0] Sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 00 00
[KRN] CPU usage: 0.4
[KRN] CPU usage: 0.1
[USB MSS 00.0] Unit was not ready. Requesting sense.
[USB MSS 00.0] Sense: 70 0

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
michalsc
 Post subject:
PostPosted: Tue Feb 17, 2009 11:12 am 
Offline

Joined: Mon Dec 05, 2005 7:23 am
Posts: 32
Location: Germany
Quote:
On screen it stops loading with the same line. On the serial console it looks a bit different.
Ok. That looks much better now. Try to do two combinations:

a. add the "bootdelay=5" option,
b. try to connect usb stick directly.

I will have a look into sources soon.

_________________
Michal Schulz
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 17, 2009 11:42 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
Well, for me, connecting the USB stick directly to the board never worked, and right now the firmware is not in a mood work with a hub connected stick either. Maybe tomorrow...

BTW: looking at the output of the ls command from FFS makes me wonder, why EXT2 does not show file sizes, or directories...

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 17, 2009 11:51 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
OK, I had one more idea: I had my USB stick with AROS connected to the board, but booted from the HDD, with 'bootdelay=5'. Here is the resulting serial log:
Code:
EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2007 bplan GmbH (BUILD 20070122 84240)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Setup AC97... Done.
Memory Test skipped (Warmboot detected)
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
channel 0 unit 0 : ata | ST980815A | 3.ALD
ATA device not present or not responding
EMULATION INT HANDLER ENTERED WITH:
INT NO: 15

EAX=0000 EBX=1111 ECX=2222 EDX=3333 ESP=0000 EBP=5555 ESI=6666 EDI=7777
AX=4E08 BX=C105 CX=0003 DX=102A SP=6B42 BP=5555 SI=6B50 DI=9A5B
DS=C000 ES=BAD0 SS=C000 CS=F000 IP=FE15 NV UP -- PL ZR NA PE NC
CS:IP = F4 FS=BAD4 GS=BAD5C1FE C000 0244 3000 0000 0200 AC4E 0200
UNHANDLED INT 10 FUNCTION 0007 WITHIN EMULATION
VM using 4358225 x86 cycles for GFX init
�)*�*.�-.�200B Kernel build on Feb 10 2009
[KRN] BootMsg @ 0x19111e4
[KRN] Copying TagList and data
[KRN] CmdLine: 'bootdelay=3 bootdelay=5'
[KRN] Initializing exception handlers
[KRN] Initializing MMU
[KRN] Location of MMU tables: 07000000-070fffff
[KRN] SDR1 = 0700000f
[KRN] Flushing TLB
[KRN] MBAR at f0000000
[KRN] HID0=0010c000 HID1=40000000
[KRN] Entering ictl_init.
[KRN] Stopping all interrupt activities
[KRN] Mapping 00003000-06ffffff range for public use
[KRN] mmu_map_area(000000003000, 00003000, 06ffd000, 0012)
[KRN] Mapping f0000000-f002fffc range for MBAR
[KRN] mmu_map_area(0000f0000000, f0000000, 0000c000, 002a)
[KRN] Mapping ff100000-ff124fff range for public read-only access
[KRN] mmu_map_area(0000ff100000, 07100000, 00025000, 0011)
[KRN] Mapping ff125000-ff7f2fff range for supervisor
[KRN] mmu_map_area(0000ff125000, 07125000, 006ce000, 0010)
[KRN] Mapping ff7f3000-ff7fffff range for read-write
[KRN] mmu_map_area(0000ff7f3000, 077f3000, 0000d000, 0012)
[KRN] Mapping ff800000-ff972fff range for read-only
[KRN] mmu_map_area(0000ff800000, 07800000, 00173000, 0013)
[KRN] Mapping ff973000-ffffffff range for supervisor
[KRN] mmu_map_area(0000ff973000, 07973000, 0068d000, 0010)
[KRN] Supervisor mem: 6967KB free
[exec] AROS for Efika5200B - The AROS Research OS
[exec] Preparing the ExecBase...
[exec] ExecBase at 000032c0
[exec] Clearing ExecBase
[exec] Initializing library...
[exec] Adding memory
[exec] Done. SysBase->ThisTask = 0x004180
[exec] Resident modules (addr: pri version name):
[exec] + 0xff810bd8: 127 2 "kernel.resource"
[exec] + 0xff811ff8: 126 41 "exec.library"
[exec] + 0xff83a1b0: 110 41 "expansion.library"
[exec] + 0xff8fe30c: 104 1 "partition.library"
[exec] + 0xff849738: 103 41 "utility.library"
[exec] + 0xff837c50: 102 41 "aros.library"
[exec] + 0xff90b224: 102 0 "openfirmware.resource"
[exec] + 0xff81ab7c: 101 40 "mathieeesingbas.library"
[exec] + 0xff90939c: 100 41 "bootloader.resource"
[exec] + 0xff9028a4: 94 41 "oop.library"
[exec] + 0xff8f93dc: 92 1 "hiddclass.hidd"
[exec] + 0xff81f0f8: 90 1 "i2c.hidd"
[exec] + 0xff8bc72c: 90 1 "pci.hidd"
[exec] + 0xff90f780: 90 1 "irq.hidd"
[exec] + 0xff90e568: 89 1 "pci-efika.hidd"
[exec] + 0xff8735a8: 65 41 "graphics.library"
[exec] + 0xff8f7ecc: 60 41 "layers.library"
[exec] + 0xff90c9bc: 50 41 "timer.device"
[exec] + 0xff81faec: 45 41 "misc.resource"
[exec] + 0xff921cf8: 45 41 "battclock.resource"
[exec] + 0xff83bb3c: 44 41 "keyboard.device"
[exec] + 0xff8464d4: 44 41 "gameport.device"
[exec] + 0xff839050: 40 41 "keymap.library"
[exec] + 0xff8ea1e4: 30 41 "input.device"
[exec] + 0xff8ac3dc: 10 50 "intuition.library"
[exec] + 0xff876878: 8 41 "cybergraphics.library"
[exec] + 0xff8b2a9c: 4 41 "console.device"
[exec] + 0xff836820: 0 1 "graphics.hidd"
[exec] + 0xff920518: -1 1 "radeon.hidd"
[exec] + 0xff94bae0: -10 0 "usb.hidd"
[exec] + 0xff928bfc: -15 0 "hid.hidd"
[exec] + 0xff93ec68: -15 0 "storage.hidd"
[exec] + 0xff9327b8: -20 0 "ohci.hidd"
[exec] + 0xff906fe0: -50 41 "Boot Strap"
[exec] + 0xff8b7b50: -120 44 "workbench.library"
[exec] + 0xff8d666c: -120 41 "dos.library"
[exec] + 0xff8e6e94: -122 1 "cdrom.handler"
[exec] + 0xff957688: -122 41 "afs.handler"
[exec] + 0xff9705ec: -122 1 "sfs.handler"
[exec] + 0xff8d71c8: -125 41 "LDDemon"
[exec] + 0xff818580: -126 1 "packet.handler"
[exec] + 0xff843488: -126 41 "con.handler"
[exec] + 0xff847398: -127 41 "nil.handler"
[exec] + 0xff8eff2c: -128 1 "amberram.handler"
[exec] InitCode(RTF_SINGLETASK)
enter InitCode(0x2, 0)
calling InitResident("kernel.resource", NULL)
[KRN] Kernel resource post-exec init.
[KRN] Interrupts enabled
[KRN] Entered user mode
calling InitResident("expansion.library", NULL)
leave InitCode(0x2, 0)
[exec] InitCode(RTF_COLDSTART)
enter InitCode(0x1, 0)
calling InitResident("partition.library", NULL)
calling InitResident("utility.library", NULL)
calling InitResident("aros.library", NULL)
calling InitResident("openfirmware.resource", NULL)
[OF] OpenFirmware_Init
[OF] BootInto @ ff7ffc20
[OF] OpenFirmware root at ff100000
calling InitResident("mathieeesingbas.library", NULL)
calling InitResident("bootloader.resource", NULL)
[BootLdr] Init. msg=0xff7ffc20
[BootLdr] KRN_CmdLine=0xff124168
[BootLdr] CmdLine="bootdelay=3 bootdelay=5"
[BootLdr] Init: Argument bootdelay=3
[BootLdr] Init: Argument bootdelay=5
calling InitResident("oop.library", NULL)
calling InitResident("hiddclass.hidd", NULL)
calling InitResident("i2c.hidd", NULL)
[I2C] Init
calling InitResident("pci.hidd", NULL)
[PCI] Initializing PCI system
[PCIDriver] Dummy Driver initialization
[PCI] base class initialization
[PCI] Everything OK
calling InitResident("irq.hidd", NULL)
calling InitResident("pci-efika.hidd", NULL)
[PCI_Efika] Driver initialization
[PCI_Efika] OpenFirmwareBase = 000060f0
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[PCI_Efika] MBAR located at f0000000
[PCI_Efika] PCITBATR0 = f0000000
[PCI_Efika] PCITBATR1 = 00000001
[PCI_Efika] PCIIW0BTAR = 803f8000
[PCI_Efika] PCIIW1BTAR = f8000000
[PCI_Efika] PCIIW2BTAR = f9000000
[PCI_Efika] PCIIWCR = 01090000
[PCI_Efika] PCIICR = 00000000
[PCI_Efika] PCI MEM: 80000000 - bfffffff
[PCI_Efika] PCI IO: f8000000 - f8ffffff
[KRN] KrnMapGlobal(f8000000->f8000000 00010000 0305)
[KRN] mmu_map_area(0000f8000000, f8000000, 00010000, 003a)
[PCI_Efika] Adding Driver to main the class OK
[PCI] Adding Driver class 0x00007854
[PCI] Adding driver PCINative (Efika5200 native direct access PCI driver) to the system
[PCI] Scanning bus 0
[PCIDevice] 00.10.0 = 1002:5960 (Video PC Compatible VGA)
[PCIDevice] 00.10.1 = 1002:5940 (Video Other )
[PCIDevice] 00.1c.0 = 1057:5809 (Bridge Other )
[PCI_Efika] All OK
calling InitResident("graphics.library", NULL)
calling InitResident("layers.library", NULL)
calling InitResident("timer.device", NULL)
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[KRN] KrnAddIRQHandler(04, 0x00ff90be40, 0x000003c0e0, 0x00000032c0):
[KRN] handle=0x00ff1251e0
[KRN] Enabling main irq 4.
[KRN] CPMIM=00000fff PIM=ffffff00
[KRN] PMCE=00000001 PIS=00000000
calling InitResident("misc.resource", NULL)
calling InitResident("battclock.resource", NULL)
calling InitResident("keyboard.device", NULL)
calling InitResident("gameport.device", NULL)
calling InitResident("keymap.library", NULL)
calling InitResident("input.device", NULL)
calling InitResident("intuition.library", NULL)
calling InitResident("cybergraphics.library", NULL)
calling InitResident("console.device", NULL)
[exec] NewAddTask with unaligned stack pointer! fixing 0006d0a4->0006d0a0
calling InitResident("graphics.hidd", NULL)
calling InitResident("radeon.hidd", NULL)
[ATI] Init
[ATI] Enumerator: checking productid 5960 vendorid 1002 00009a44
[ATI] Enumerator: found productid 5960 vendorid 1002 masked_check 0
[KRN] KrnMapGlobal(80000000->80000000 08000000 0305)
[KRN] mmu_map_area(000080000000, 80000000, 08000000, 003a)
[ATI] Got framebuffer @ 80000000 (size=128MiB)
[KRN] KrnMapGlobal(88000000->88000000 00010000 0305)
[KRN] mmu_map_area(000088000000, 88000000, 00010000, 003a)
[ATI] Got registers @ 88000000 (size=64KiB)
[ATI] RomBase provided by ATI card: 88020000
[KRN] KrnMapGlobal(88020000->88020000 00020000 0305)
[KRN] mmu_map_area(000088020000, 88020000, 00020000, 003a)
[ATI] Got BIOS @ 88020000 (size=128KiB)
[ATIBMP] Bitmap at 0x6f800, size 16384 bytes (131072 bits)
[ATI] Video BIOS not detected in PCI space!
[ATI] Attempting to read Video BIOS using openfirmware
[OF] OpenKey('/pci/display')
[OF] looking for child 'pci'
[OF] looking for child 'display'
[ATI] OF reported BIOS at ff103db8
[ATI] Legacy BIOS detected
[ATI] Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-4
[ATI] Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
[KRN] IdleTask entered
[KRN] CPU usage: 79.7
[ATI] Usable size: 131072KB
.
[ATI] Enumerator found a card (ProductID=5960)
[ATI] The card is supported
calling InitResident("usb.hidd", NULL)
[USB] USB Init
[USB] Process starter
calling InitResident("hid.hidd", NULL)
[USB] USB::New()
[USB] USB::New() = 0x78e74
[USB] USB::AddClass("hid.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
calling InitResident("storage.hidd", NULL)
[MSS] USB Mass Storage Init.
[MSS] Init done.
[USB] USB::New()
[USB] USB::New() = 0x7b1d4
[USB] USB::AddClass("storage.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
[MSS] USB Mass Storage device layer init
calling InitResident("ohci.hidd", NULL)
[OHCI_MPC5200B] OHCI_Init()
[USB] USB::New()
[USB] USB::New() = 0x7d534
[OF] OpenKey('/builtin/usb')
[OF] looking for child 'builtin'
[OF] looking for child 'usb'
[OHCI_MPC5200B] HC @ f0001000
[OHCI_MPC5200B] 2-port Device 1 @ 0007d5c4 with MMIO @ f0001000
[OHCI_MPC5200B] Done. OHCI devices found: 1
[OHCI] InitClass
[OHCI] Initializing driver object: dev=0, drv=0x7d5c4, 2 ports @ 0xf0001000
[OHCI] OHCI::New()
[USB] USBDevice::New()
[USBDevice::New] Address=01, Interface=00, Bus=0, Hub=0
[USBDevice::New] Device 0000:0000 09/00/00 at address 00000000:01
[USBDevice::New] Default LangID=0409
[USBDevice::New] iProduct = "OHCI Root HUB"
[USBDevice::New] iManufacturer = "The AROS Development Team"
[USBDevice::New] iSerial = "0000.0017"
[USB] USBDevice::New() = 0x7d664
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[KRN] KrnSetProtection(00081000, 00081fff, 003a)
[KRN] KrnAddIRQHandler(1b, 0x00ff92b96c, 0x0000082410, 0x00ff7f4100):
[KRN] handle=0x00ff125c20
[KRN] Enabling peripheral irq 27.
[KRN] CPMIM=00000fff PIM=fdffff00
[KRN] PMCE=00000001 PIS=00000000
[OHCI] IRQHandler = 00082410 int = 27
[OHCI] New(): o=0x7d664, ports=2, regs=0xf0001000, drv=0x7d5c4, dev=0, hcca=0x81000
[KRN] KrnSetProtection(00085000, 00085fff, 003a)
[OHCI] ctl=000000b4 fm=27782edf desca=02001202 descb=00000000
[OHCI] Initial setup
[OHCI] ival=00002edf
[OHCI] fm=a7782edf
[OHCI] periodic start=00002a2f
[OHCI] delay=4
[OHCI] OHCI controller up and running.
[OHCI] OHCI::New() = 0x7d664
[USB] USB::AttachDriver(0x7d664)
[KRN] CPU usage: 19.4
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0040
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] Trying external class "storage.hidd"
[MSS] MatchCLID(0x80095, 0x79044)
[MSS] UDCLASS_IN_INTERFACE OK. Checking interface 0
[MSS] iface 0 @ 0x7904d class 9 subclass 0 protocol 0
[USB] USBDevice::New()
[USBDevice::New] Address=02, Interface=00, Bus=0x7d664, Hub=0x7d664
[USBDevice::New] Device 0608:05e3 09/00/00 at address 0007d664:02
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB2.0 Hub"
[USB] USBDevice::New() = 0x86474
[KRN] CPU usage: 7.5
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x09
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0040
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] USBDevice::New()
[USBDevice::New] Address=03, Interface=00, Bus=0x7d664, Hub=0x7d664
[USBDevice::New] Device 0608:05e3 09/00/00 at address 0007d664:03
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB2.0 Hub"
[USB] USBDevice::New() = 0x865b4
[USB] Descriptor dump:
[USB] bLength = 9
[USB] bDescriptorType = 41 (Hub)
[USB] bNbrPorts = 4
[USB] wHubCharacteristics = 0x00e9
[USB] bPwrOn2PwrGood = 100 ms
[USB] bHubContrCurrent = 100
[USB] DeviceRemovable = 00ff000000000000000000000000000000000000000000000000000000000000
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 25
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x790d6 end=0x790dd len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x790d6
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[OHCI] Best node (0 uses) 0 from 32
calling InitResident("Boot Strap", NULL)
[Boot] delay of 3 seconds requested.[KRN] CPU usage: 16.1
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0110
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0008
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] USBDevice::New()
[USBDevice::New] Address=04, Interface=00, Bus=0x7d664, Hub=0x865b4
[USBDevice::New] Device 0116:04f2 00/00/00 at address 0007d664:04
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB Keyboard"
[USBDevice::New] iManufacturer = "CHICONY"
[USB] USBDevice::New() = 0x891d4
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 34
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x79166 end=0x79176 len=9 type=33
[USBDevice] fill_iface: p=0x7916f end=0x79176 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x7916f
[HID] hid_maxrepid(0x89494,65)
[HID] ReportID=0
[HID] ReportID=0
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 8
[USB] bInterval = 10
[OHCI] Best node (0 uses) 0 from 8
[KRN] CPU usage: 12.3
[KRN] CPU usage: 0.1
[Boot] delay of 5 seconds requested.[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
enter InitCode(0x4, 0)
calling InitResident("cdrom.handler", NULL)
calling InitResident("afs.handler", NULL)
calling InitResident("sfs.handler", NULL)
calling InitResident("LDDemon", NULL)
calling InitResident("packet.handler", NULL)
calling InitResident("con.handler", NULL)
calling InitResident("nil.handler", NULL)
calling InitResident("amberram.handler", NULL)
leave InitCode(0x4, 0)
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 3.9
[KRN] CPU usage: 0.1
[USB] Process starter: dos.library up and running
[USB] Process starter: Creating the main USB process
[KRN] CPU usage: 0.5
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 0.6
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 0.4
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 0.4
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
No bootable disk was found.
Please insert a bootable disk in any drive.
Retrying in 5 seconds...
[KRN] CPU usage: 0.4
[KRN] CPU usage: 0.1


Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 24, 2009 7:51 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
Quote:
I will have a look into sources soon.
Any news? Today I have time for some testing...

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
michalsc
 Post subject:
PostPosted: Tue Feb 24, 2009 8:40 am 
Offline

Joined: Mon Dec 05, 2005 7:23 am
Posts: 32
Location: Germany
Quote:
Quote:
I will have a look into sources soon.
Any news? Today I have time for some testing...
Soon. I have fixed one nasty issue, which stopped many usb sticks from working. But recently, I was busy with ata.device for aros :) It does 3.6MB/s in PIO2 mode now and I'm working on UDMA implementation.

Tell me if you will like to test it :)

_________________
Michal Schulz
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Tue Feb 24, 2009 8:56 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
Quote:
Tell me if you will like to test it :)
Yes, as I find running a system from USB 1.1 a kind of insane... But I can test a fixed version of USB for you just for the fun :)

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
michalsc
 Post subject:
PostPosted: Tue Feb 24, 2009 4:00 pm 
Offline

Joined: Mon Dec 05, 2005 7:23 am
Posts: 32
Location: Germany
Quote:
Quote:
Tell me if you will like to test it :)
Yes, as I find running a system from USB 1.1 a kind of insane... But I can test a fixed version of USB for you just for the fun :)
Here you have. Both, fixed USB and ATA in one package :)

http://linuxtracker.org/download.php?id ... z2.torrent

PS. AROS will boot only from the volume, where AROS.boot file with proper arch is found. :)

_________________
Michal Schulz
Top
   
Reply with quote  
michalsc
 Post subject:
PostPosted: Tue Feb 24, 2009 6:20 pm 
Offline

Joined: Mon Dec 05, 2005 7:23 am
Posts: 32
Location: Germany
Quote:
Here you have. Both, fixed USB and ATA in one package :)
and a nice screenshot of AROS running from HD :)

Image

_________________
Michal Schulz


Last edited by michalsc on Thu Feb 26, 2009 1:56 am, edited 1 time in total.

Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Wed Feb 25, 2009 3:08 pm 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
Most likely I'll only have time early next week to test it. Until that a question: is this new browser supported, which was just announced on osNews? http://www.osnews.com/story/21039/AROS_ ... a_OWB_Port

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Wed Feb 25, 2009 10:51 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1594
Location: Austin, TX
Quote:
Most likely I'll only have time early next week to test it. Until that a question: is this new browser supported, which was just announced on osNews? http://www.osnews.com/story/21039/AROS_ ... a_OWB_Port
Someone would need to simply compile it for PowerPC AROS..

Michal can you resize that image?

_________________
Matt Sealey
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Thu Feb 26, 2009 6:31 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1071
OK. I got a little time, and I booted AROS on EFIKA from the HDD. I did not touch yet anything. I have yet to attach a mouse (I only have one for five machines at the moment...). Here is a serial console log.
Code:

Welcome to openSUSE 11.1 - Kernel 2.6.27.7-99.1-genesi (ttyPSC0).


linux-bnkx login: QTj*.5K2 Boot Strap [RELEASE BUILD] (c) 2002-2007 bplan GmbH (BUILD 20070122 8424)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Setup AC97... Done.
Memory Test skipped (Warmboot detected)
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
channel 0 unit 0 : ata | ST980815A | 3.ALD
ATA device not present or not responding
EMULATION INT HANDLER ENTERED WITH:
INT NO: 15

EAX=0000 EBX=1111 ECX=2222 EDX=3333 ESP=0000 EBP=5555 ESI=6666 EDI=7777
AX=4E08 BX=C105 CX=0003 DX=102A SP=6B42 BP=5555 SI=6B50 DI=9A5B
DS=C000 ES=BAD0 SS=C000 CS=F000 IP=FE15 NV UP -- PL ZR NA PE NC
CS:IP = F4 FS=BAD4 GS=BAD5C1FE C000 0244 3000 0000 0200 AC4E 0200
UNHANDLED INT 10 FUNCTION 0007 WITHIN EMULATION
VM using 4358222 x86 cycles for GFX init
�)*�*.�-.�200B Kernel build on Feb 23 2009
[KRN] BootMsg @ 0x19111e4
[KRN] Copying TagList and data
[KRN] CmdLine: 'bootdelay=3 bootdelay=5'
[KRN] Initializing exception handlers
[KRN] Initializing MMU
[KRN] Location of MMU tables: 07000000-070fffff
[KRN] SDR1 = 0700000f
[KRN] Flushing TLB
[KRN] MBAR at f0000000
[KRN] HID0=0010c000 HID1=40000000
[KRN] Entering ictl_init.
[KRN] Stopping all interrupt activities
[KRN] Mapping 00003000-06ffffff range for public use
[KRN] mmu_map_area(000000003000, 00003000, 06ffd000, 0012)
[KRN] Mapping f0000000-f002fffc range for MBAR
[KRN] mmu_map_area(0000f0000000, f0000000, 0000c000, 002a)
[KRN] Mapping ff100000-ff124fff range for public read-only access
[KRN] mmu_map_area(0000ff100000, 07100000, 00025000, 0011)
[KRN] Mapping ff125000-ff7f2fff range for supervisor
[KRN] mmu_map_area(0000ff125000, 07125000, 006ce000, 0010)
[KRN] Mapping ff7f3000-ff7fffff range for read-write
[KRN] mmu_map_area(0000ff7f3000, 077f3000, 0000d000, 0012)
[KRN] Mapping ff800000-ff97cfff range for read-only
[KRN] mmu_map_area(0000ff800000, 07800000, 0017d000, 0013)
[KRN] Mapping ff97d000-ffffffff range for supervisor
[KRN] mmu_map_area(0000ff97d000, 0797d000, 00683000, 0010)
[KRN] Supervisor mem: 6967KB free
[exec] AROS for Efika5200B - The AROS Research OS
[exec] Preparing the ExecBase...
[exec] ExecBase at 000032c0
[exec] Clearing ExecBase
[exec] Initializing library...
[exec] Adding memory
[exec] Done. SysBase->ThisTask = 0x004180
[exec] Resident modules (addr: pri version name):
[exec] + 0xff810c68: 127 2 "kernel.resource"
[exec] + 0xff812090: 126 41 "exec.library"
[exec] + 0xff83a248: 110 41 "expansion.library"
[exec] + 0xff8ff1e0: 104 1 "partition.library"
[exec] + 0xff84bd74: 103 41 "utility.library"
[exec] + 0xff837ce8: 102 41 "aros.library"
[exec] + 0xff90c534: 102 0 "openfirmware.resource"
[exec] + 0xff81ac14: 101 40 "mathieeesingbas.library"
[exec] + 0xff90a6ac: 100 41 "bootloader.resource"
[exec] + 0xff903b50: 94 41 "oop.library"
[exec] + 0xff8fa2b0: 92 1 "hiddclass.hidd"
[exec] + 0xff81f190: 90 1 "i2c.hidd"
[exec] + 0xff8bed08: 90 1 "pci.hidd"
[exec] + 0xff91a014: 90 1 "irq.hidd"
[exec] + 0xff918dfc: 89 1 "pci-efika.hidd"
[exec] + 0xff875998: 65 41 "graphics.library"
[exec] + 0xff8f8da0: 60 41 "layers.library"
[exec] + 0xff917250: 50 41 "timer.device"
[exec] + 0xff81fb84: 45 41 "misc.resource"
[exec] + 0xff92c588: 45 41 "battclock.resource"
[exec] + 0xff83bbd4: 44 41 "keyboard.device"
[exec] + 0xff84656c: 44 41 "gameport.device"
[exec] + 0xff8390e8: 40 41 "keymap.library"
[exec] + 0xff8eb0b8: 30 41 "input.device"
[exec] + 0xff8ae7dc: 10 50 "intuition.library"
[exec] + 0xff878c68: 8 41 "cybergraphics.library"
[exec] + 0xff8b4e9c: 4 41 "console.device"
[exec] + 0xff914ba0: 4 41 "ata.device"
[exec] + 0xff8368b8: 0 1 "graphics.hidd"
[exec] + 0xff92ada8: -1 1 "radeon.hidd"
[exec] + 0xff956348: -10 0 "usb.hidd"
[exec] + 0xff93348c: -15 0 "hid.hidd"
[exec] + 0xff949548: -15 0 "storage.hidd"
[exec] + 0xff93d048: -20 0 "ohci.hidd"
[exec] + 0xff9082f0: -50 41 "Boot Strap"
[exec] + 0xff8ba0f4: -120 44 "workbench.library"
[exec] + 0xff8d7950: -120 41 "dos.library"
[exec] + 0xff8e7d68: -122 1 "cdrom.handler"
[exec] + 0xff961ef0: -122 41 "afs.handler"
[exec] + 0xff97ae64: -122 1 "sfs.handler"
[exec] + 0xff8d84ac: -123 41 "LDDemon"
[exec] + 0xff818618: -124 1 "packet.handler"
[exec] + 0xff843520: -124 41 "con.handler"
[exec] + 0xff847430: -127 41 "nil.handler"
[exec] + 0xff849614: -128 41 "dosboot.resource"
[exec] + 0xff8f0e00: -128 1 "amberram.handler"
[exec] InitCode(RTF_SINGLETASK)
enter InitCode(0x2, 0)
calling InitResident("kernel.resource", NULL)
[KRN] Kernel resource post-exec init.
[KRN] Interrupts enabled
[KRN] Entered user mode
calling InitResident("expansion.library", NULL)
leave InitCode(0x2, 0)
[exec] InitCode(RTF_COLDSTART)
enter InitCode(0x1, 0)
calling InitResident("partition.library", NULL)
calling InitResident("utility.library", NULL)
calling InitResident("aros.library", NULL)
calling InitResident("openfirmware.resource", NULL)
[OF] OpenFirmware_Init
[OF] BootInto @ ff7ffc20
[OF] OpenFirmware root at ff100000
calling InitResident("mathieeesingbas.library", NULL)
calling InitResident("bootloader.resource", NULL)
[BootLdr] Init. msg=0xff7ffc20
[BootLdr] KRN_CmdLine=0xff123ed0
[BootLdr] CmdLine="bootdelay=3 bootdelay=5"
[BootLdr] Init: Argument bootdelay=3
[BootLdr] Init: Argument bootdelay=5
calling InitResident("oop.library", NULL)
calling InitResident("hiddclass.hidd", NULL)
calling InitResident("i2c.hidd", NULL)
[I2C] Init
calling InitResident("pci.hidd", NULL)
[PCI] Initializing PCI system
[PCIDriver] Dummy Driver initialization
[PCI] base class initialization
[PCI] Everything OK
calling InitResident("irq.hidd", NULL)
calling InitResident("pci-efika.hidd", NULL)
[PCI_Efika] Driver initialization
[PCI_Efika] OpenFirmwareBase = 000060f0
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[PCI_Efika] MBAR located at f0000000
[PCI_Efika] PCITBATR0 = f0000000
[PCI_Efika] PCITBATR1 = 00000001
[PCI_Efika] PCIIW0BTAR = 803f8000
[PCI_Efika] PCIIW1BTAR = f8000000
[PCI_Efika] PCIIW2BTAR = f9000000
[PCI_Efika] PCIIWCR = 01090000
[PCI_Efika] PCIICR = 00000000
[PCI_Efika] PCI MEM: 80000000 - bfffffff
[PCI_Efika] PCI IO: f8000000 - f8ffffff
[KRN] KrnMapGlobal(f8000000->f8000000 00010000 0305)
[KRN] mmu_map_area(0000f8000000, f8000000, 00010000, 003a)
[PCI_Efika] Adding Driver to main the class OK
[PCI] Adding Driver class 0x00007854
[PCI] Adding driver PCINative (Efika5200 native direct access PCI driver) to the system
[PCI] Scanning bus 0
[PCIDevice] 00.10.0 = 1002:5960 (Video PC Compatible VGA)
[PCIDevice] 00.10.1 = 1002:5940 (Video Other )
[PCIDevice] 00.1c.0 = 1057:5809 (Bridge Other )
[PCI_Efika] All OK
calling InitResident("graphics.library", NULL)
calling InitResident("layers.library", NULL)
calling InitResident("timer.device", NULL)
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[KRN] KrnAddIRQHandler(04, 0x00ff9166d4, 0x000003c0e0, 0x00000032c0):
[KRN] handle=0x00ff1251e0
[KRN] Enabling main irq 4.
[KRN] CPMIM=00000fff PIM=ffffff00
[KRN] PMCE=00000001 PIS=00000000
calling InitResident("misc.resource", NULL)
calling InitResident("battclock.resource", NULL)
calling InitResident("keyboard.device", NULL)
calling InitResident("gameport.device", NULL)
calling InitResident("keymap.library", NULL)
calling InitResident("input.device", NULL)
calling InitResident("intuition.library", NULL)
calling InitResident("cybergraphics.library", NULL)
calling InitResident("console.device", NULL)
[exec] NewAddTask with unaligned stack pointer! fixing 0006d0a4->0006d0a0
calling InitResident("ata.device", NULL)
[OF] OpenKey('/builtin')
[OF] looking for child 'builtin'
[ATA] MBAR located at f0000000
[ATA] bus frequency: 132000000
[OF] OpenKey('/builtin/ata')
[OF] looking for child 'builtin'
[OF] looking for child 'ata'
[ATA] ATA registers at f0003a00
[OF] OpenKey('/builtin/ata/bestcomm-task')
[OF] looking for child 'builtin'
[OF] looking for child 'ata'
[OF] looking for child 'bestcomm-task'
[ATA] ATA uses bestcomm task 0
[OF] OpenKey('/builtin/sram')
[OF] looking for child 'builtin'
[OF] looking for child 'sram'
[ATA] SRAM at f0008000
[OF] OpenKey('/builtin/bestcomm')
[OF] looking for child 'builtin'
[OF] looking for child 'bestcomm'
[ATA] bestcomm at f0001200
[ATA] ata_config=03000000
[ATA] ata_status=00000000
[ATA] ata_pio1=562a1800
[ATA] ata_pio2=050a0500
[ATA] xlb_config=0000a706
[ATA] bestcomm_init()
[ATA] taskBar at f0008000
[ATA] looking on ivar at f0008300:
[ATA] enable=00000000 bd_base=00000000 bd_last=00000000 bd_start=00000000 buffer_size=00000000
[ATA--] ata.device initialization
[ATA--] BootloaderBase = 0x6184
[ATA--] Enumerating devices
[ATA>>] IO: 3a60:3a54 DMA: 0
[ATA>>] Analysing bus 0, units 0 and 1
[ATA ] ata_InitBus(0)
[ATA ] IRQ: Setting IRQ flag for bus 0 to DISABLED
[KRN] IdleTask entered
[ATA ] ata_InitBus: Finished
[ATA>>] Bus 0: Unit 0 - 2, Unit 1 - 0
[exec] NewAddTask with unaligned stack pointer! fixing 0007543c->00075430
[KRN] KrnAddIRQHandler(1c, 0x00ff913a9c, 0x000006d3c4, 0x00ff7f3f30):
[KRN] handle=0x00ff125a70
[KRN] Enabling peripheral irq 28.
[KRN] CPMIM=00000fff PIM=feffff00
[KRN] PMCE=00200001 PIS=00000000
[ATA ] ata_setup_unit: Enabling Bus IRQs
[ATA ] IRQ: Setting IRQ flag for bus 0 to ENABLED
[ATA00] ata_Identify: Unit info: ST980815A / / 3.ALD
[ATA00] ata_Identify: Unit info: 950f8b0 28bit / 0000:0950f8b0 48bit addressable blocks
[ATA>>]:-ata_RegisterVolume: 'HD0' with StartCyl=0, EndCyl=17228 .. done
[exec] NewAddTask with unaligned stack pointer! fixing 0007969c->00079690
calling InitResident("graphics.hidd", NULL)
calling InitResident("radeon.hidd", NULL)
[ATI] Init
[ATI] Enumerator: checking productid 5960 vendorid 1002 00009a44
[ATI] Enumerator: found productid 5960 vendorid 1002 masked_check 0
[KRN] KrnMapGlobal(80000000->80000000 08000000 0305)
[KRN] mmu_map_area(000080000000, 80000000, 08000000, 003a)
[ATI] Got framebuffer @ 80000000 (size=128MiB)
[KRN] KrnMapGlobal(88000000->88000000 00010000 0305)
[KRN] mmu_map_area(000088000000, 88000000, 00010000, 003a)
[ATI] Got registers @ 88000000 (size=64KiB)
[ATI] RomBase provided by ATI card: 88020000
[KRN] KrnMapGlobal(88020000->88020000 00020000 0305)
[KRN] mmu_map_area(000088020000, 88020000, 00020000, 003a)
[ATI] Got BIOS @ 88020000 (size=128KiB)
[ATIBMP] Bitmap at 0x7bda0, size 16384 bytes (131072 bits)
[ATI] Video BIOS not detected in PCI space!
[ATI] Attempting to read Video BIOS using openfirmware
[OF] OpenKey('/pci/display')
[OF] looking for child 'pci'
[OF] looking for child 'display'
[ATI] OF reported BIOS at ff103b20
[ATI] Legacy BIOS detected
[ATI] Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-4
[ATI] Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
[KRN] CPU usage: 91.1
[ATI] Usable size: 131072KB
.
[ATI] Enumerator found a card (ProductID=5960)
[ATI] The card is supported
calling InitResident("usb.hidd", NULL)
[USB] USB Init
[USB] Process starter
calling InitResident("hid.hidd", NULL)
[USB] USB::New()
[USB] USB::New() = 0x85414
[USB] USB::AddClass("hid.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
calling InitResident("storage.hidd", NULL)
[MSS] USB Mass Storage Init.
[MSS] Init done.
[USB] USB::New()
[USB] USB::New() = 0x87774
[USB] USB::AddClass("storage.hidd")
[USB] Class not on the list. Adding it.
[USB] USB::Dispose
[MSS] USB Mass Storage device layer init
calling InitResident("ohci.hidd", NULL)
[OHCI_MPC5200B] OHCI_Init()
[USB] USB::New()
[USB] USB::New() = 0x89ad4
[OF] OpenKey('/builtin/usb')
[OF] looking for child 'builtin'
[OF] looking for child 'usb'
[OHCI_MPC5200B] HC @ f0001000
[OHCI_MPC5200B] 2-port Device 1 @ 00089b64 with MMIO @ f0001000
[OHCI_MPC5200B] Done. OHCI devices found: 1
[OHCI] InitClass
[OHCI] Initializing driver object: dev=0, drv=0x89b64, 2 ports @ 0xf0001000
[OHCI] OHCI::New()
[USB] USBDevice::New()
[USBDevice::New] Address=01, Interface=00, Bus=0, Hub=0
[USBDevice::New] Device 0000:0000 09/00/00 at address 00000000:01
[USBDevice::New] Default LangID=0409
[USBDevice::New] iProduct = "OHCI Root HUB"
[USBDevice::New] iManufacturer = "The AROS Development Team"
[USBDevice::New] iSerial = "0000.0017"
[USB] USBDevice::New() = 0x89c04
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[KRN] KrnSetProtection(0008d000, 0008dfff, 003a)
[KRN] KrnAddIRQHandler(1b, 0x00ff9361fc, 0x000008e9b0, 0x00ff7f3f30):
[KRN] handle=0x00ff125fa0
[KRN] Enabling peripheral irq 27.
[KRN] CPMIM=00000fff PIM=fcffff00
[KRN] PMCE=00200001 PIS=00000000
[OHCI] IRQHandler = 0008e9b0 int = 27
[OHCI] New(): o=0x89c04, ports=2, regs=0xf0001000, drv=0x89b64, dev=0, hcca=0x8d000
[KRN] KrnSetProtection(00091000, 00091fff, 003a)
[OHCI] ctl=000000b4 fm=27782edf desca=02001202 descb=00000000
[OHCI] Initial setup
[OHCI] ival=00002edf
[OHCI] fm=a7782edf
[OHCI] periodic start=00002a2f
[OHCI] delay=4
[OHCI] OHCI controller up and running.
[OHCI] OHCI::New() = 0x89c04
[USB] USB::AttachDriver(0x89c04)
[KRN] CPU usage: 26.1
[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0200
[USB] bDeviceClass = 0x09
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0040
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] USBDevice::New()
[USBDevice::New] Address=02, Interface=00, Bus=0x89c04, Hub=0x89c04
[USBDevice::New] Device 0608:05e3 09/00/00 at address 00089c04:02
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB2.0 Hub"
[USB] USBDevice::New() = 0x92a14
[USB] Descriptor dump:
[USB] bLength = 9
[USB] bDescriptorType = 41 (Hub)
[USB] bNbrPorts = 4
[USB] wHubCharacteristics = 0x00e9
[USB] bPwrOn2PwrGood = 100 ms
[USB] bHubContrCurrent = 100
[USB] DeviceRemovable = 00ff000000000000000000000000000000000000000000000000000000000000
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 25
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x85666 end=0x8566d len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x85666
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 1
[USB] bInterval = 255
[OHCI] Best node (0 uses) 0 from 32
[KRN] CPU usage: 15.9
calling InitResident("Boot Strap", NULL)
[Boot] delay of 3 seconds requested.[USB] USB::NewDevice()
[USB] Descriptor dump:
[USB] bLength = 18
[USB] bDescriptorType = 1 (Device)
[USB] bcdUSB = 0x0110
[USB] bDeviceClass = 0x00
[USB] bDeviceSubClass = 0x00
[USB] bDeviceProtocol = 0x00
[USB] bMaxPacketSize = 0x0008
[USB] idVendor = 0x0000
[USB] idProduct = 0x0000
[USB] bcdDevice = 0x0000
[USB] iManufacturer = 0x00
[USB] iProduct = 0x00
[USB] iSerialNumber = 0x00
[USB] bNumConfigurations = 0
[USB] Trying external class "hid.hidd"
[USB] USBDevice::New()
[USBDevice::New] Address=03, Interface=00, Bus=0x89c04, Hub=0x92a14
[USBDevice::New] Device 0116:04f2 00/00/00 at address 00089c04:03
[USBDevice::New] Default LangID=0904
[USBDevice::New] iProduct = "USB Keyboard"
[USBDevice::New] iManufacturer = "CHICONY"
[USB] USBDevice::New() = 0x95634
[USBDevice::Configure] Configure(0)
[USBDevice::Configure] Fetching config descriptor of length 34
[USBDevice::Configure] Allocating 1 interfaces
[USBDevice] fill_iface: ifaceidx=0 altidx=0
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
[USBDevice] find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
[USBDevice] fill_iface: found idesc nendpt=1
[USBDevice] fill_iface: endpt=0
[USBDevice] fill_iface: p=0x856f6 end=0x85706 len=9 type=33
[KRN] CPU usage: 9.4
[USBDevice] fill_iface: p=0x856ff end=0x85706 len=7 type=5
[USBDevice] fill_iface: endpoint descriptor 0x856ff
[HID] hid_maxrepid(0x958f4,65)
[HID] ReportID=0
[HID] ReportID=0
[USB] Descriptor dump:
[USB] bLength = 7
[USB] bDescriptorType = 5 (Endpoint)
[USB] bEndpointAddress = 81
[USB] bmAttributes = 03
[USB] wMaxPacketSize = 8
[USB] bInterval = 10
[OHCI] Best node (0 uses) 0 from 8
[KRN] CPU usage: 3.5
[KRN] CPU usage: 0.1
[Boot] delay of 5 seconds requested.[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[KRN] CPU usage: 0.1
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda1 bootable: 0
[Boot] Looking up handler for 0x4C4E5800
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda2 bootable: 0
[Boot] Looking up handler for 0x53575000
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda3 bootable: 1
[Boot] Looking up handler for 0x444F5301
[Boot] found handler: afs.handler
[Boot] AddBootNode(sda3,0x444f5301,'afs.handler')
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda4 bootable: 0
[Boot] Looking up handler for 0x45585403
[Boot] found handler: ext.handler
[Boot] AddBootNode(sda4,0x45585403,'ext.handler')
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda5 bootable: 0
[Boot] Looking up handler for 0x45585403
[Boot] found handler: ext.handler
[Boot] AddBootNode(sda5,0x45585403,'ext.handler')
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda6 bootable: 0
[Boot] Looking up handler for 0x4C4E5800
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda7 bootable: 0
[Boot] Looking up handler for 0x4C4E5800
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda8 bootable: 0
[Boot] Looking up handler for 0x4C4E5800
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda9 bootable: 0
[Boot] Looking up handler for 0x4C4E5800
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: sda10 bootable: 0
[Boot] Looking up handler for 0x45585403
[Boot] found handler: ext.handler
[Boot] AddBootNode(sda10,0x45585403,'ext.handler')
[Boot] AddPartitionVolume
[Boot] RDB partition
[Boot] Partition name: dhx bootable: 0
[Boot] Looking up handler for 0x45585403
[Boot] found handler: ext.handler
[Boot] AddBootNode(dhx,0x45585403,'ext.handler')
[DOS] DosInit: InitCode(RTF_AFTERDOS)
enter InitCode(0x4, 0)
calling InitResident("cdrom.handler", NULL)
calling InitResident("afs.handler", NULL)
calling InitResident("sfs.handler", NULL)
calling InitResident("LDDemon", NULL)
calling InitResident("packet.handler", NULL)
calling InitResident("con.handler", NULL)
calling InitResident("nil.handler", NULL)
calling InitResident("dosboot.resource", NULL)
calling InitResident("amberram.handler", NULL)
leave InitCode(0x4, 0)
[KRN] CPU usage: 16.2
[KRN] CPU usage: 32.9
[dos] Opening 'ext.handler'... [dos] Opening 'devs/ext.handler'... [dos] Opening 'devs:ext.handler'r
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[USB] Process starter: dos.library up and running
[USB] Process starter: Creating the main USB process
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packetr
[dos] Opening 'packet.handler'... [dos] Opening 'devs/packet.handler'... [dos] Opening 'devs:packets
init_gfx(hiddbase=RadeonDriver)
gfx.library opened
calling private gfx LateGfxInit()
success
Closing gfx
Exit init_gfxhidd=TRUE
Exit init_hidds=TRUE
[dos] Opening 'C:Shell'... sh->addr = 000f21a8 - 000f820f
[dos] Opening 'C:SetClock'... sh->addr = 000c68c0 - 000c7497
[dos] Opening 'C:FailAt'... sh->addr = 000c6818 - 000c6a0f
[dos] Opening 'C:Makedir'... sh->addr = 000c68c0 - 000c7357
[dos] Opening 'amberram.handler'... [dos] Opening 'devs/amberram.handler'... [dos] Opening 'amberra3
[dos] Opening 'iffparse.library'... [dos] Opening 'libs/iffparse.library'... sh->addr = 0011a738 -7
[dos] Opening 'C:If'... sh->addr = 000c6a48 - 000c70e3
[dos] Opening 'C:Makedir'... sh->addr = 000c6af0 - 000c7587
[dos] Opening 'C:EndIf'... sh->addr = 000c6a48 - 000c6bc3
[dos] Opening 'C:Assign'... sh->addr = 000c6a78 - 000c7f17
[dos] Opening 'C:Assign'... sh->addr = 000c6a78 - 000c7f17
[dos] Opening 'C:Assign'... sh->addr = 000c6ad8 - 000c7f77
[dos] Opening 'C:Assign'... sh->addr = 000c6bd8 - 000c8077
[dos] Opening 'C:Assign'... sh->addr = 000c6c68 - 000c8107
[dos] Opening 'C:Assign'... sh->addr = 000c6d28 - 000c81c7
[dos] Opening 'C:Assign'... sh->addr = 000c6da8 - 000c8247
[dos] Opening 'C:Assign'... sh->addr = 000c6e68 - 000c8307
[dos] Opening 'C:Assign'... sh->addr = 000c6ef8 - 000c8397
[dos] Opening 'C:Assign'... sh->addr = 000c6fe8 - 000c8487
[dos] Opening 'C:Assign'... sh->addr = 000c7078 - 000c8517
[dos] Opening 'C:Mount'... sh->addr = 000c7250 - 000cadef
[dos] Opening 'arosc.library'... [dos] Opening 'libs/arosc.library'... [KRN] CPU usage: 48.2
sh->addr = 0012fbb0 - 00155277
[dos] Opening 'icon.library'... [dos] Opening 'libs/icon.library'... sh->addr = 001659f8 - 001727e3
[dos] Opening 'datatypes.library'... [dos] Opening 'libs/datatypes.library'... sh->addr = 001761c83
[dos] Opening 'pipefs.handler'... [dos] Opening 'devs/pipefs.handler'... sh->addr = 0017d868 - 0017
[dos] Opening 'xpipe.handler'... [dos] Opening 'devs/xpipe.handler'... sh->addr = 0018b288 - 0018c7
[dos] Opening 'C:If'... sh->addr = 000c72d8 - 000c7973
[dos] Opening 'C:Assign'... sh->addr = 000c7308 - 000c87a7
[dos] Opening 'C:EndIf'... sh->addr = 000c72d8 - 000c7453
[dos] Opening 'C:If'... sh->addr = 000c72d8 - 000c7973
[dos] Opening 'C:Touch'... sh->addr = 000c73e0 - 000c7897
[dos] Opening 'C:Assign'... sh->addr = 000c7468 - 000c8907
[dos] Opening '

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 3 of 4
  [ 52 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group