All times are UTC-06:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Efika fails
PostPosted: Mon Jan 05, 2009 1:10 pm 
Offline

Joined: Thu Nov 11, 2004 7:34 am
Posts: 130
Location: Bielefeld, FRG
Some days before Christmas my Efika suddenly failed.
When I power the device on, the hdd spins up for a second and then the device switches off.

The serial debug tells me this:

EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (BUILD 20061101134833)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000
RAM TEST (fill random)...

After this, the device turns off. I.e. During RAM tet the Efika refuses to stay on line any longer, but switches itself off.
For testing purpose the Efika runs headless with no peripherals other than the hdd connected.

Any idea someone what to do?


Top
   
 Post subject: Re: Efika fails
PostPosted: Mon Jan 05, 2009 4:14 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
For testing purpose the Efika runs headless with no peripherals other than the hdd connected.

Any idea someone what to do?
Try disconnecting the hard disk, and test again?

If it ever comes back alive, update your firmware :D

_________________
Matt Sealey


Top
   
 Post subject: Re: Efika fails
PostPosted: Mon Jan 05, 2009 6:39 pm 
Offline

Joined: Thu Nov 11, 2004 7:34 am
Posts: 130
Location: Bielefeld, FRG
Quote:
Try disconnecting the hard disk, and test again?
Good hint, with hdd removed it proceeds:

EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (BUILD 20061101134833)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000
RAM TEST (fill random)... Done.
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
Welcome to SmartFirmware(tm) for bplan EFIKA5K2
Version 1.3 (20061107101950)
SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
All Rights Reserved.
Pegasos BIOS Extensions Copyright 2001-2006 by bplan GmbH.
All Rights Reserved.
Auto-boot in 0 seconds - press ESC to abort, ENTER to boot:
error: error while trying to load or boot
ok

I guess, I should check that hdd and/or get another one.


Top
   
 Post subject: Re: Efika fails
PostPosted: Tue Jan 06, 2009 11:13 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
Try disconnecting the hard disk, and test again?
Good hint, with hdd removed it proceeds

--snip--
I guess, I should check that hdd and/or get another one.
I've seen this before with an older hard disk (~10GB) - when they start to fail mechanically they draw a ridiculous amount of power from the board (since spinning up is "harder") - and this causes the system to basically shut down.

_________________
Matt Sealey


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group