All times are UTC-06:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Best of Show
PostPosted: Sun May 04, 2008 6:56 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
We are about a week away from finalizing our Best of Show nominees for the Freescale Technology Forum. If you would like your development to be considered for submission, please write us.

FTF is 16-19 June in Orlando, Florida. If we select your Project for submission we will bring you to FTF as our Guest. Submissions can include software that runs on Genesi hardware (Pegasos/ODW, EFIKA/Open Client) or Freescale hardware we/Freescale have sponsored (5121e ADS, 8610 or ColdFire Development Systems). Submissions can also include a complete system package that you have developed.

Please let us know!

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Sun May 11, 2008 9:14 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Thanks for all the ideas and inquires, but we have decided not to participate in the Orlando FTF event. The main reason is that the next version of the 5121e and first version 5123 won't be ready before the Show. Consequently, it will be impossible for us to have the new designs ready with the latest release of the silicon.

We will be participating in the Global Events which begin in the Fall. We will be writing those of you that have written us as that time gets closer. Thanks again for all the ideas and support.

Best regards,
R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Mon May 12, 2008 1:29 am 
Offline

Joined: Mon Jan 08, 2007 3:40 am
Posts: 195
Location: Pinto, Madrid, Spain
Quote:
we have decided not to participate in the Orlando FTF event. The main reason is that the next version of the 5121e and first version 5123 won't be ready before the Show.
Big, big miss.

The 5121E is not ready? What happened to those working LimePC prototypes from Chinese THTF? We all saw them.
I'm very surprised that a new version of a chip is needed, after seeing working prototypes almost looking like final product. Which are those much needed differences? Was the original version so bad?


Top
   
 Post subject:
PostPosted: Mon May 12, 2008 3:06 am 
Offline

Joined: Wed Jul 27, 2005 9:20 am
Posts: 242
Quote:
The main reason is that the next version of the 5121e and first version 5123 won't be ready before the Show.
Will the new version of the 5121e have cache coherency, or is that too much of a big design change to be included in a mere revision of the same chip?


Top
   
 Post subject:
PostPosted: Mon May 12, 2008 5:03 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
I'm very surprised that a new version of a chip is needed, after seeing working prototypes almost looking like final product. Which are those much needed differences? Was the original version so bad?
We had the same issues with the MPC5200B which delayed that Efika by 6 months and more. Just because there is silicon and it runs code doesn't mean it *works*. We had serious bugs in the original MPC5200 which delayed until the MPC5200B, and then in the MP5200B there were some serious BestComm and ATA issues which you'd have to resolve in software (hence the DMA-PIO driver, but this took a long while to find out).

The MPC5121E is not what we wanted to start with but it's a working, usable chip nonetheless. However it is not ready for users.

THTF's prototypes at CES were just that - prototypes. A working display model running SOME code but not necessarily doing anything exciting. There is absolutely no chance you would be putting that device into production with the current state of the silicon.

_________________
Matt Sealey


Top
   
 Post subject:
PostPosted: Mon May 12, 2008 5:17 am 
Offline

Joined: Mon Jan 08, 2007 3:40 am
Posts: 195
Location: Pinto, Madrid, Spain
Quote:

[snip]

There is absolutely no chance you would be putting that device into production with the current state of the silicon.
As always, thankyou very much for the information, Matt. Lesson learnt!
When Genesi does something, you can be absolutely sure that it is not motivated by any kind of bullshit: A technical compromise exists.
Quote:
Will the new version of the 5121e have cache coherency?
From what I've learnt recently, cache coherency is not a big issue itself. Many CPUs don't have it. You can write programs anyway, in this case, kernels.
It merely complicates things if you want to make a kernel that runs on a variety of CPUs, and some have cache coherency while others don't. You would actually need different kernels.


Top
   
 Post subject:
PostPosted: Mon May 12, 2008 12:59 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
Will the new version of the 5121e have cache coherency?
From what I've learnt recently, cache coherency is not a big issue itself. Many CPUs don't have it. You can write programs anyway, in this case, kernels.
It merely complicates things if you want to make a kernel that runs on a variety of CPUs, and some have cache coherency while others don't. You would actually need different kernels.
The answer is no, the 5121E (and 5123) are not designed with cache coherency in mind. It is, as you said, a software problem for the most part. The software simply has to make special effort to get the best performance. Of course in certain scenarios cache coherency can make systems slower - snoops and acks and cache management take up valuable system resources. Usually chips built this way don't have too many peripherals though.

We took exception with the 5121E because it has a LOT of peripherals and many of them are driven by a high-speed DMA controller. This will make development a little more hassle than it could have been (and than anyone is used to on PowerPC) but, it is all in a day's work.

At the end of the day, the userspace programs - anything you install outside the kernel, will be exactly the same, so it doesn't affect you guys much.

_________________
Matt Sealey


Top
   
 Post subject:
PostPosted: Thu Jun 19, 2008 9:54 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 111
Quote:
We had serious bugs in the original MPC5200 which delayed until the MPC5200B, and then in the MP5200B there were some serious BestComm and ATA issues which you'd have to resolve in software (hence the DMA-PIO driver, but this took a long while to find out).
I just saw this patch the other day - does this mean the problems are finally solved?


Top
   
 Post subject:
PostPosted: Thu Jun 19, 2008 9:57 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
...by now you have seen the FTF Keynote.

;-)

Don't worry. We have not 'missed' a thing.

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Thu Jun 19, 2008 12:18 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
I just saw this patch the other day - does this mean the problems are finally solved?
No. This didn't fix any problem at all.

_________________
Matt Sealey


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group