All times are UTC-06:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Pegasos2 memory limit ?
PostPosted: Mon Jul 11, 2005 2:19 am 
Offline

Joined: Sun May 08, 2005 8:46 pm
Posts: 559
Location: Paris
hello mates

does the Pegasos 2 handle 1Gb RAM under linux ? no memory limit like the Peg1 ? (256Mo)

thanks


Top
   
 Post subject: Pegasos2 memory limit ?
PostPosted: Mon Jul 11, 2005 2:58 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 20
> does the Pegasos 2 handles 1Gb RAM under linux ? no memory limit like the Peg1 ? (256Mo)

Yes. I'm running 1Gb right now.

However, it does not handle two 1 Gigabyte modules, which sucks.

--
-Tatu Kilappa <trilkk@iki.fi>


Top
   
PostPosted: Mon Jul 11, 2005 6:49 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 103
Location: Gothenburg, Sweden
It should as long as you enable high mem support in the kernel.
Using 1 * 1024 is much more stable than 2 * 512.


Top
   
PostPosted: Mon Jul 11, 2005 8:18 am 
Offline

Joined: Sun May 08, 2005 8:46 pm
Posts: 559
Location: Paris
Quote:
It should as long as you enable high mem support in the kernel.
Using 1 * 1024 is much more stable than 2 * 512.
thanks for the info dholm


Top
   
PostPosted: Wed Jul 13, 2005 6:47 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 20
Quote:
hello mates
does the Pegasos 2 handle 1Gb RAM under linux ? no memory limit like the Peg1 ? (256Mo)
thanks
Yes it does. I have one 1Gb module in my system, and it's running just fine.


Top
   
 Post subject: Pegasos2 memory limit ?
PostPosted: Wed Jul 13, 2005 10:20 pm 
Offline

Joined: Sat Apr 16, 2005 11:18 am
Posts: 1
On Monday 11 July 2005 08:49, dholm wrote:
> It should as long as you enable high mem support in the kernel.
> Using 1 * 1024 is much more stable than 2 * 512.

There is a possibility of instability?  
Does anyone know how or why?  
Is this with MorphOS or linux?  (or both?)


Top
   
PostPosted: Thu Jul 14, 2005 12:43 am 
Offline

Joined: Wed Oct 20, 2004 11:20 pm
Posts: 82
Trikk,

Out of curiosity, what is the latency on that 1GB stick?

--Aaron


Top
   
PostPosted: Thu Jul 14, 2005 1:07 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 20
Quote:
Out of curiosity, what is the latency on that 1GB stick?
I'll give all the specks. It's Kingston DDR333 CL2.5 REG ECC 1GB sitck.

I had two, but putting them both in my Linux would not even successfully boot due to the issues discussed here all so often.


Top
   
PostPosted: Fri Jul 15, 2005 1:39 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Try this...

http://www.crucial.com/store/listparts. ... I&tabid=AM

The newest boards work fine with 2 x 1GB for a MySQL Server, but it is expensive. If you can get by with 1 GB and 2 x 512 MB it is much cheaper.

R&B :-)


Top
   
PostPosted: Sun Jul 24, 2005 6:36 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 20
Quote:
http://www.crucial.com/store/listparts. ... I&tabid=AM
The newest boards work fine with 2 x 1GB for a MySQL Server, but it is expensive. If you can get by with 1 GB and 2 x 512 MB it is much cheaper.
Hm.

I think I'll pass on that. My current memory is CL2.5, which theoretically gives me a bit better performance. The 1GB is quite enough, I'll install the second comb should they supply a firmware patch that makes it work.


Top
   
PostPosted: Wed Jul 27, 2005 9:25 am 
Offline

Joined: Wed Jul 27, 2005 9:20 am
Posts: 242
@bbrv
Quote:
The newest boards work fine with 2 x 1GB for a MySQL Server, but it is expensive. If you can get by with 1 GB and 2 x 512 MB it is much cheaper.
Just curious, what do you mean with "newest boards"? I mean, has something changed electronically on the newest boards, or is it simply thanks to a newer and improved firmware version (which may also become released for "older" boards)?


Top
   
PostPosted: Fri Jul 29, 2005 12:10 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 269
Location: Los Angeles
Yes, good point.

What exactly does "newer boards" mean? What has changed?

Also.. FYI

I have had a 256mb and 512mb stick installed to give 768mb Ram. Tested with both Debian and with MOS working nicely. The Ram used (and highly recommended as I personally have seriously stress-tested this type of Ram - like Memtests, extremly heavy and high volume inet traffic, compiling, etc) Samsung pc2700 DDR Ram. Highly reliable and good data rates. It seems that the Pegasos 2 likes their timing or something, which is why the original ODWs where specced with this ram type .. However, I have not tried this combo since the latest OF release..

Speaking of, what is the situation with a new OF?

Additionally, it is very cool that crucial has direct support on their data sheets for "ODW"

magnetic


Top
   
PostPosted: Mon Aug 01, 2005 12:42 am 
Offline

Joined: Sun Oct 24, 2004 7:37 am
Posts: 37
As far I know the new PII boards has new OF revison than the recent version from bPlan home page. Then I gues this is a OF ... hope to see upgrade soon.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group