| Power Developer https://powerdeveloper.org/forums/ |
|
| via-rhine problem https://powerdeveloper.org/forums/viewtopic.php?f=7&t=360 |
Page 1 of 1 |
| Author: | smf [ Tue Sep 06, 2005 12:36 am ] |
| Post subject: | via-rhine problem |
Hi i'm unable to get the via-rhine driver to work with the 2.6.12 kernel.. it works fine with my old 2.4.27 kernel but for some reason i just gets this message with a never kernel: via-rhine: probe of 0000:00:08.0 failed with error -5 I'm thinking that the problem might be caused due to that my peg1 dont have a mac-address but it works just fine with the 2.4 kernel after i have addedd a line that looks like this -> "pre-up ifconfig eth0 hw ether 02:03:04:05:06:07" in the /etc/network/interfaces file. |
|
| Author: | smf [ Fri Sep 09, 2005 4:26 am ] |
| Post subject: | Re: via-rhine problem |
The problem was caused by the missing MAC-addresss. i did a small change to the driver and now it loads just fine..but for some reason it runs in 10Mbit half-dublex mode. How do i force it to run in 100Mbit? |
|
| Author: | fab [ Tue Mar 28, 2006 7:25 am ] |
| Post subject: | |
I thought that it could be changed with ifconfig but it's probably only in FreeBSD. Try this for linux : http://www.scyld.com/ethercard_diag.html#mii-diag |
|
| Page 1 of 1 | All times are UTC-06:00 |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|