All times are UTC-06:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Thu Oct 19, 2006 12:55 pm 
Offline

Joined: Wed May 03, 2006 7:42 am
Posts: 12
Location: Italy
Image

Magnetic asked me to post this tutorial on PPCZone for those in similar conditions, all i did was to follow a tutorial online (in italian) meant for average PC users.

My configuration:

Peg2/G4
Nokia 6630
USB phone->PC cable
Ubuntu Breezy (5.10)

1) Create a file called "wvdial.conf" in /etc/ with a plain text editor (gedit did the job for me) with the following content:
Code:
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
Init1 = ATZ
Init2 = AT+CGDCONT=1,"IP","internet.wind",,0,0
ISDN = 0
Modem Type = Analog Modem
Carrier Check = no
Phone = *99#
Username = ''
Password = ''
In the Init2 string change "internet.wind" to the access point string of your mobile operator.

2) Remember to configure your mobile for GPRS/UMTS services (follow their instructions) and to activate the service itself.

3) If you have connected in the past to ADSL from your Pegasos using Linux remember to do following:

a) open the Terminal;

b) type "network-admin" and give your root password when asked;

c) disable ethernet connection or you won't be able to go online using your mobile as a modem;

4) open the Terminal and type:
Code:
wvdial
Now you should be online :).

P.S.: I did it using a tutorial this summer, i'm not sure I've written everything, your mileage may vary, comments and corrections are welcome!


Top
   
 Post subject:
PostPosted: Thu Oct 19, 2006 1:22 pm 
Very interesting.
I could add this somewhere in the Pegasos book...


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 11:20 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 269
Location: Los Angeles
c64 days

Thanks for posting this. Its a very cool article. Too bad more people didnt share info about interesting things they are doing with Pegasos. There are guys out there doing some pretty amazing things. For example, when I was a dealer I sold 2 peg1s to a company called "Flying Robots" and they were using Peg1s to control their robots (they were using amigas with custom programs apparently, and the peg / mos was a step up)

magnetic


Top
   
PostPosted: Mon Oct 30, 2006 9:09 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
.. post this tutorial on PPCZone for those in similar conditions, all i did was to follow a tutorial online
I edited your post to make it look neater, hope you don't mind :)

_________________
Matt Sealey


Top
   
PostPosted: Wed Nov 01, 2006 4:00 pm 
Offline

Joined: Wed May 03, 2006 7:42 am
Posts: 12
Location: Italy
Quote:
Quote:
.. post this tutorial on PPCZone for those in similar conditions, all i did was to follow a tutorial online
I edited your post to make it look neater, hope you don't mind :)
Thanks Neko, now it looks better! I see a [/list] tag closing
my starting post, maybe it's some artifact from your editing?


Top
   
 Post subject:
PostPosted: Fri Nov 03, 2006 1:40 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Hi c64days,

It has now been fixed. This will be a very good thing to do with the EFIKA. Thank you for the effort and documentation! You are a Power Poster! 8)

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Sat Nov 04, 2006 7:52 am 
Offline

Joined: Wed May 03, 2006 7:42 am
Posts: 12
Location: Italy
Quote:
Hi c64days,

It has now been fixed. This will be a very good thing to do with the EFIKA. Thank you for the effort and documentation! You are a Power Poster! 8)

R&B :)
Thanks! I'm honoured by this award :D , there are some other interesting and/or challenging subjects that are worth a tutorial, like browser-wise Java support (Sun seems to forget that Linux isn't X86 only), i've seen a few posts around about it but a proper tutorial would be more than welcome.


Top
   
 Post subject:
PostPosted: Sat Nov 04, 2006 8:51 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Hi again c64days, have you registered for an EFIKA? If not, you will have your chance one more time (we are going to open it back up for a couple of days next week!). Will you register to do this and document it thoroughly? If so, we will send you an EFIKA this month. Thanks again for your great post.

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Sat Nov 04, 2006 12:30 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Hi again c64days, have you registered for an EFIKA? If not, you will have your chance one more time (we are going to open it back up for a couple of days next week!). Will you register to do this and document it thoroughly? If so, we will send you an EFIKA this month. Thanks again for your great post.

R&B :)
Let's target the weekend for this reopening :)

_________________
Matt Sealey


Top
   
 Post subject:
PostPosted: Mon Nov 06, 2006 4:26 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
OK, we need to make a plan on this and start promoting it tomorrow.

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Tue Nov 07, 2006 2:00 pm 
Offline

Joined: Wed May 03, 2006 7:42 am
Posts: 12
Location: Italy
I'll be glad to join in (my time is very limited though)
and look forward for the reopening of Efika developer program.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group