| Power Developer https://powerdeveloper.org/forums/ |
|
| initial support for efikaMX added to openembedded https://powerdeveloper.org/forums/viewtopic.php?f=60&t=1856 |
Page 1 of 1 |
| Author: | khem [ Sun Sep 05, 2010 12:34 pm ] |
| Post subject: | initial support for efikaMX added to openembedded |
 Openembedded now has EfikaMX as one of supported machines. http://git.openembedded.org/cgit.cgi/op ... 697dd5de46 http://git.openembedded.org/cgit.cgi/op ... 8cf1aef3e2 http://git.openembedded.org/cgit.cgi/op ... 60d805e5b0 MACHINE=efikamx DISTRO=minimal bitbake x11-image ...generated bootloader, kernel and root file system, which when put on SD card boots openembedded. A detailed writeup on Openembedded Wiki on getting OE on efikaMX is WIP. -Khem |
|
| Author: | bbrv [ Sun Sep 05, 2010 1:34 pm ] |
| Post subject: | |
Nice work khem. R&B :) |
|
| Author: | Neko [ Thu Sep 09, 2010 6:47 am ] |
| Post subject: | Re: initial support for efikaMX added to openembedded |
Quote: A detailed writeup on Openembedded Wiki on getting OE on efikaMX is WIP.
You spelled Genesi wrong :)-Khem Also could you update your kernel build file, 2.6.31.14 is the latest and greatest and has many vast improvements. I dread to think if someone decided to build a OE environment for a TO3 board using your current config. It's on PowerDeveloper... works for all boards. |
|
| Author: | likewise [ Sun Sep 12, 2010 2:29 pm ] |
| Post subject: | |
http://cgit.openembedded.org/cgit.cgi/o ... 8367763a95 http://cgit.openembedded.org/cgit.cgi/o ... 2ddddd3eca Genesi and 2.6.31.14 it is! Still need to test on the board. |
|
| Author: | lool [ Mon Sep 27, 2010 5:29 am ] |
| Post subject: | u-boot source |
Nice! I didn't test build this, but I see you're using the u-boot tarball from the website (which is currently not linked from anywhere anymore); perhaps you want to switch to the gitorious tree instead? It's at http://www.gitorious.org/efikamx/uboot-efikamx. Unfortunately, neither the tarball-ed nor the git u-boots worked for me; I wonder whether your SD card images have a working u-boot? Are you booting from the SD card with the DIP switches set to "off, off, off, on" and can you see your u-boot version string during boot? Thanks! |
|
| Author: | khem [ Sat Oct 02, 2010 2:20 pm ] |
| Post subject: | Re: u-boot source |
Quote: Nice!
Thanks for the info. When I added the support it fetched fine. I still have it in my stash so its used from there. May be I need to update the fetch URIs. I prepare the SD card with root file system modules and kernel only. I am using the shipped version of u-boot still as I did not want to brick the box. Although once it booted the OE kernel and rfs fine I could try it out.I didn't test build this, but I see you're using the u-boot tarball from the website (which is currently not linked from anywhere anymore); perhaps you want to switch to the gitorious tree instead? It's at http://www.gitorious.org/efikamx/uboot-efikamx. Unfortunately, neither the tarball-ed nor the git u-boots worked for me; I wonder whether your SD card images have a working u-boot? Are you booting from the SD card with the DIP switches set to "off, off, off, on" and can you see your u-boot version string during boot? Thanks! But I thought optimizing packages (uclibc specially and kernel) for cortext a8 would be a better thing to do before I fiddle with u-boot :) I still have issue with the kernel where it does not shutdown properly when reboot is issued. |
|
| Page 1 of 1 | All times are UTC-06:00 |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|