You mean the serial console ? Or did you port the vga graphics driver ?
We have both! Open Firmware give us that (thank you Genesi!!)
More soon...
Finally!
R&B
| Power Developer https://powerdeveloper.org/forums/ |
|
| Boots on the ODW https://powerdeveloper.org/forums/viewtopic.php?f=25&t=627 |
Page 1 of 1 |
| Author: | bbrv [ Fri May 26, 2006 6:06 am ] |
| Post subject: | Boots on the ODW |
You mean the serial console ? Or did you port the vga graphics driver ? We have both! Open Firmware give us that (thank you Genesi!!) More soon... Finally! R&B
|
|
| Author: | SoundSquare [ Fri May 26, 2006 8:10 am ] |
| Post subject: | |
woooooooooo !!!! 
|
|
| Author: | bbrv [ Sun May 28, 2006 6:18 pm ] |
| Post subject: | |
If you are in the Silicon Valley and would like to attend the Sun Microsystems Open House this week, please let us know. The ODW booting OpenSolaris is scheduled to be featured in Sun Labs at the event. R&B
|
|
| Author: | SoundSquare [ Mon May 29, 2006 4:38 am ] |
| Post subject: | |
pics and videos for the distant and frustrated ones please !!! |
|
| Author: | bbrv [ Tue May 30, 2006 8:53 pm ] |
| Post subject: | |
It is just initializing, but it is something!  ======= From: Joshua Uziel Date: May 30, 2006 9:31:51 PM CDT To: Raquel Velasco and Bill Buck Cc: Tom Riddle, Sven Luther Subject: Re: screenshot Attached is a boot log and a binary to take a look at. It doesn't do too much. All you should have to do is make an entry in the boot menu to load and execute it. Let me know if you have any questions. PegasosII Boot Strap (c) 2002-2004 bplan GmbH Running on CPU PVR:80020101 Enable L1 ICache... Done. Clean/Flush Block enabled Reading W83194 : 00FFFFFFFFFF0000 Done. Setting Front Side Bus to 133MHz... Done. Memory has not changed Configuring Memory Memory Config Done Configuring PCI0... Done. Configuring PCI1... Done. Configuring ETH... Done. Releasing IDE reset ... Done. Configuring Legacy Devices Initializing KBD...00000032 FAILED. Testing 10000000 Bytes, Pass: 00000000 Failed: 00000000 RAM TEST (fill random)... Done. SmartFirmware: cpu0: PowerPC,74x7 CPUClock 999 Mhz BUSClock 133 Mhz (Version 0x8002,0x0101) no/bad nvramrc - performing default startup script ATA device not present or not responding ATA device not present or not responding channel 0 unit 0 : ata | ST340014A | 3.06 ATA device not present or not responding channel 1 unit 0 : atapi | SAMSUNG CDRW/DVD SM-352F | T900 EMULATION INT HANDLER ENTERED WITH: INT NO: 15 EAX=0003 EBX=1111 ECX=2222 EDX=3333 ESP=0000 EBP=5555 ESI=6666 EDI=7777 AX=4E08 BX=C505 CX=0003 DX=102A SP=6CAA BP=5555 SI=6CB8 DI=9C58 DS=C000 ES=BAD0 SS=C000 CS=F000 IP=FE15 NV UP -- PL ZR NA PE NC CS:IP = F4 FS=BAD4 GS=BAD5C558 C000 0244 3000 0000 01B4 AC63 0200 UNHANDLED INT 10 FUNCTION 0007 WITHIN EMULATION VM using 4782891 x86 cycles for GFX init Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.2 (20040810112413) SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc. All Rights Reserved. Pegasos BIOS Extensions Copyright 2001-2004 by bplan GmbH. All Rights Reserved. auto-booting... Auto-boot in 5 seconds - press ESC to abort, ENTER to boot: Auto-boot in 5 seconds - press ESC to abort, ENTER to boot: Auto-boot in 4 seconds - press ESC to abort, ENTER to boot: Auto-boot in 3 seconds - press ESC to abort, ENTER to boot: Auto-boot in 2 seconds - press ESC to abort, ENTER to boot: Auto-boot in 1 seconds - press ESC to abort, ENTER to boot: Auto-boot in 0 seconds - press ESC to abort, ENTER to boot: /-\|/-\|/- Pegasos boot menu 1: MorphOS 2: Debian GNU/Linux 2.4 kernel 3: Debian GNU/Linux 2.6.4 kernel 4: Debian GNU/Linux 2.6.8 kernel 5: Gentoo 2.6.10 6: Gentoo 2.6.12 7: Polaris Test 8: return to OF prompt press 1-8 within 30 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 29 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : press 1-8 within 28 seconds (default: 5) : \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Starting Polaris: Opensolaris on PPC... Sun Labs in collaboration with the Polaris community. BSS cleared from 00b066d8 - 00b692b0 (Size 62bd8) Found Valid CPU... Processor Version Reg = 80020101 mlsetup.c:120: mlsetup() starting... Initialized t0 thread. mlsetup.c:230: fiximp_obp() starting... Obtained timebase frequency = 33333333 hz Calculated timebase period = 0 Calculated timebase ticks pre 10usec = 333 mlsetup.c:276: fiximp_obp() done. mlsetup.c:199: mlsetup() done. Number test for 127 in o d x: 177 127 7f Leaving locore.s ... executing main()... startup.c:169: startup_init() starting... startup.c:185: startup_init() done startup.c:233: startup_memlist() starting... mlsetup.c:475: bgetprop() starting... ======= Let us know if you want to give it a try! We have a binary we can send you. R&B
|
|
| Author: | bbrv [ Wed May 31, 2006 12:55 am ] |
| Post subject: | |
 R&B
|
|
| Author: | SoundSquare [ Wed May 31, 2006 1:32 am ] |
| Post subject: | |
@bbrv sure i'm interested ! It looks promising ! you can send it at soundsquare(at)ifrance.com thanks ! |
|
| Author: | bbrv [ Wed May 31, 2006 1:42 am ] |
| Post subject: | |
On the way... Let us know how it works for you. We have the first feedback from Eastern Europe already (Hungary wins!) and it looks good there too! R&B
|
|
| Author: | SoundSquare [ Wed May 31, 2006 1:10 pm ] |
| Post subject: | |
thanks ! i just tried it and well it boots, just the same. It looks so real now, (open)Solaris on Pegasos is a major step ! thanks for the fast email ! |
|
| Author: | bbrv [ Wed May 31, 2006 1:25 pm ] |
| Post subject: | |
@SoundSquare - great! Here are some nice pictures from Sun: http://bbrv.blogspot.com/2006/05/openso ... werpc.html R&B
|
|
| Author: | bbrv [ Wed May 31, 2006 6:50 pm ] |
| Post subject: | |
http://www.blastware.org/polaris/index.html Go for it! R&B
|
|
| Author: | ironfist [ Fri Jun 02, 2006 5:52 pm ] |
| Post subject: | |
BBRV: Great! But can you edit your post so we don't have to scroll sideways?  ..Official OpenSolaris support would be super - especially for the upcoming OSW-racks and HDB.. |
|
| Author: | bbrv [ Sat Jul 15, 2006 11:12 am ] |
| Post subject: | |
The port should be released this week. We have the last Sun Microsystems Legal hurdles to finish and...!!! R&B
|
|
| Author: | SoundSquare [ Sat Jul 15, 2006 3:35 pm ] |
| Post subject: | |
fantastic news, this gonna be a great week for sure ! |
|
| Page 1 of 1 | All times are UTC-06:00 |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|