My partition on within the first phys 8Gb, and 10Gb long... oops
will try to reduce
P.S. In 10.2 before I get message about first 8Gb limitation, but after moving HFS volume in top of disk it succesfully installed and worked on 10GB patrition
| Power Developer https://powerdeveloper.org/forums/ |
|
| 10.3 install troubles https://powerdeveloper.org/forums/viewtopic.php?f=25&t=282 |
Page 1 of 1 |
| Author: | CLR [ Thu Jun 30, 2005 5:38 pm ] |
| Post subject: | 10.3 install troubles |
In MoL 0.70 I cannot install Panther, becouse installer not allow to select disk with next message: "MacOS cannot boot from this disk". MacOS 10.2 Jaguar in same conditions works fine. In osx.config HFS volume with -boot -whole -force flags For HFS volumes i have standalone IDE hard disk drive Seagate 120Gb; partitioning with OpenDiskUtility in MacOS installer. Disk sets in Master on IDE channel 0. any idea? |
|
| Author: | dholm [ Fri Jul 01, 2005 1:01 am ] |
| Post subject: | Re: 10.3 install troubles |
Is the partition you are installing on within the first physical 8GB of the harddrive, and does it end within the first 8GB? |
|
| Author: | CLR [ Fri Jul 01, 2005 3:39 am ] |
| Post subject: | Re: 10.3 install troubles |
My partition on within the first phys 8Gb, and 10Gb long... oops will try to reduce P.S. In 10.2 before I get message about first 8Gb limitation, but after moving HFS volume in top of disk it succesfully installed and worked on 10GB patrition
|
|
| Author: | dholm [ Fri Jul 01, 2005 9:17 am ] |
| Post subject: | Re: 10.3 install troubles |
Yes, 10.2 isn't as picky as 10.3 for some reason. It's a weird problem considering you can use any partition size on a Mac. |
|
| Author: | magnetic [ Sat Jul 02, 2005 10:46 am ] |
| Post subject: | Re: 10.3 install troubles |
CLR When the OS10.3 cd boots up got the Disk Utility and be sure to select "ERASE" for the Disk/parition you are using for Mac OS.. magnetic |
|
| Author: | CLR [ Sun Jul 03, 2005 6:36 pm ] |
| Post subject: | Re: 10.3 install troubles |
Great! Boot volume available for installing now But I get new glitch: Cannot eject CD from MacOS with usual method's - drag on trashcan or from menu  And when installer wait for second disk, I cannot replace it.When I try eject CD - it disappear and after 0,5 sec appear again on desktop without physical ejection. I have Debian with 2.6.8 kernel. After update from 2.6.7 kernel a lost automount CD in /MEDIA and in root now appear pseudofile cdrom! After adding in fstab string /dev/sr0 /mnt iso9660, blablabla my ATAPI CD via sr0 device under ide-scsi emulation. In KDE automounting works nice, but from MacOS i cant eject or change disk - simple MacOS not recognized new inserted disk, changed from linux side
|
|
| Author: | magnetic [ Tue Jul 05, 2005 3:31 pm ] |
| Post subject: | Re: 10.3 install troubles |
CLR So did the "erase" help? Glad you got it working.. About the eject - yes this is a known bug with MOL sometimes. When I run OS 9.x i have this trouble, but with my Panther install it is fine - also to be able to burn cds with MOL make sure you use scsi emulation (ide-scsi) magnetic |
|
| Author: | CLR [ Tue Jul 05, 2005 5:26 pm ] |
| Post subject: | Re: 10.3 install troubles |
No - it was just 8Gb limitation trouble. Boot partition must be from beginning of HDD and no longer that 8Gb - in this conditions boot volume sucessfully available for installer And erase, of course after partition creation. Last days i have installed and worked MacOS 10.3 Panther, but CD problem still not solved. Maybe it device-model-dependent problem? My drive is ATAPI AOPEN CDRW. Have anybody same experience? |
|
| Author: | CLR [ Mon Jul 11, 2005 2:34 am ] |
| Post subject: | Re: 10.3 install troubles |
After total repartitioning and total reinstalling I have now working CD eject under MoL. Thanks for all
|
|
| Page 1 of 1 | All times are UTC-06:00 |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|