Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 4
  [ 51 posts ] 
  Previous topic | Next topic 
Author Message
czp
PostPosted: Fri Jan 08, 2010 2:25 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
I have two LCD-s, both of them without HDMI interfaces, so connected using a HDMI->DVI cable.

One is 1280x1024:
Code:
[ 0.860000] *** sii9022_probe
[ 0.860000] *** monitor is detected
[ 0.860000] *** mxc_init_fb vmode= video-mode=4 ce-mode=4 clock_auto=1
[ 0.860000] mode_option=1280x720-24@60
[ 0.860000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.860000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.880000] Console: switching to colour frame buffer device 160x45
[ 0.900000] *** sii9022 lcd_probe
[ 0.900000] *** sii9022 lcd_init_fb
[ 0.900000] read_edid2
[ 0.930000] 00ffffffffffff001e6d654b1c2f04000a110103ea261e78ea3231a3574c9d25
[ 0.930000] 115054a56a80314f454f614f81800101010101010101302a009851002a403070
[ 0.930000] 1300520e1100001e000000fd00384b1e470b000a202020202020000000fc004c
[ 0.930000] 313935340a20202020202020000000fc00200a2020202020202020202020001d
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.940000] i2c-adapter i2c-1: ACK not received
[ 0.940000] ========================================
[ 0.940000] Display Information (EDID)
[ 0.950000] ========================================
[ 0.950000] EDID Version 1.3
[ 0.950000] Manufacturer: GSM
[ 0.960000] Model: 4b65
[ 0.960000] Serial#: 274204
[ 0.970000] Year: 2007 Week 10
[ 0.970000] Monitor Name: L1954
[ 0.980000] Monitor Name:
[ 0.980000] Display Characteristics:
[ 0.990000] Monitor Operating Limits: From EDID
[ 0.990000] H: 30-71KHz V: 56-75Hz DCLK: 110MHz
[ 0.990000] Digital Display Input
[ 1.000000] Sync: Separate Sync on Green
[ 1.000000] Max H-size in cm: 38
[ 1.010000] Max V-size in cm: 30
[ 1.010000] Gamma: 2.20
[ 1.020000] DPMS: Active yes, Suspend yes, Standby yes
[ 1.020000] RGB Color Display
[ 1.030000] Chroma
[ 1.030000] RedX: 0.637 RedY: 0.343
[ 1.030000] GreenX: 0.297 GreenY: 0.615
[ 1.040000] BlueX: 0.145 BlueY: 0.069
[ 1.040000] WhiteX: 0.313 WhiteY: 0.329
[ 1.050000] First DETAILED Timing is preferred
[ 1.050000] Detailed Timings
[ 1.050000] "1280x1024@60" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.060000] Supported VESA Modes
[ 1.060000] 720x400@70Hz
[ 1.070000] 640x480@60Hz
[ 1.070000] 640x480@75Hz
[ 1.070000] 800x600@60Hz
[ 1.080000] 800x600@75Hz
[ 1.080000] 832x624@75Hz
[ 1.080000] 1024x768@60Hz
[ 1.090000] 1024x768@75Hz
[ 1.090000] 1152x870@75Hz
[ 1.100000] Manufacturer's mask: 0
[ 1.100000] Standard Timings
[ 1.100000] 640x480@75Hz
[ 1.100000] 800x600@75Hz
[ 1.110000] 1024x768@75Hz
[ 1.110000] 1280x1024@60Hz
[ 1.110000] Detail Timings
[ 1.120000] ========================================
[ 1.120000] Monitor/TV supported modelines
[ 1.120000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.130000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.130000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.130000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.140000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.140000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.140000] "832x624@75" 53.433 832 875 962 1092 624 625 628 652 -hsync -vsync
[ 1.150000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.150000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.160000] "1152x864@75" 108.03 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
[ 1.160000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.160000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.170000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.170000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.180000] PREFERRED geometry 1280 1024 9259
[ 1.180000] PREFERRED timings 9259 248 48 38 1 112 3
[ 1.180000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.190000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.190000] preferred mode geometry 1280 1024 9259
[ 1.200000] preferred mode timings 9259 248 48 38 1 112 3
[ 1.200000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.210000] 1024x768@60 pclk=15384 best mode is 1280x1024@60 pclk=9259
[ 1.210000] best mode geometry 1280 1024 9259
[ 1.210000] best mode timings 9259 248 48 38 1 112 3
[ 1.220000] best mode flag 17 sync 3 vmode 0 preferred
[ 1.220000] geometry 654982513 0 3225759484 3691208187
[ 1.230000] offset 3691208160 2147483667 274877907 0 3691208120
[ 1.230000] timings 2147483667 841888032 538976347 841888032 808464435 2121008 3225833316
[ 1.240000] accel_flags 54 sync 3693032976 vmode 2
[ 1.240000] mxcfb_di_clock_adjust pixelclk=9259 rate=432012000
[ 1.250000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.250000] adjust: parent=pll3 clk=432012000 this=ipu_di0_clk di_clk=108003000 ret=0 ret=0
[ 1.310000] reinit 1280x1024 9259
[ 1.310000] sii9022 1-0039: geometry 1280 1024 1280 1024 16
[ 1.310000] sii9022 1-0039: timings 9259 248 48 38 1 112 3
[ 1.310000] sii9022 1-0039: accel 0 sync 3 vmode=0
[ 1.310000] sii9022 1-0039: pclk 10800 refresh 6024 total x 1688 total y 1066
[ 1.310000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.320000] sii9022 1-0039: vmap idx=0 vcode=0
[ 1.320000] hdmi audio mute
[ 1.330000] hdmi audio unmute
The other one is 1680x1050:
Code:
[ 0.860000] *** sii9022_probe
[ 0.860000] *** monitor is detected
[ 0.860000] *** mxc_init_fb vmode= video-mode=4 ce-mode=4 clock_auto=1
[ 0.860000] mode_option=1280x720-24@60
[ 0.860000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.860000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.880000] Console: switching to colour frame buffer device 160x45
[ 0.900000] *** sii9022 lcd_probe
[ 0.900000] *** sii9022 lcd_init_fb
[ 0.900000] read_edid2
[ 0.930000] 00ffffffffffff0010ac19a04c47373008110103802b1b78eeee91a3544c9926
[ 0.930000] 0f5054a54b008180714f0101010101010101010101017c2e90a0601a1e403020
[ 0.930000] 3600b20e1100001a000000ff00484d30363437324c3037474c0a000000fc0044
[ 0.930000] 454c4c20323030375746500a000000fd00384c1e530e000a202020202020008c
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.930000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.940000] i2c-adapter i2c-1: ACK not received
[ 0.940000] ========================================
[ 0.940000] Display Information (EDID)
[ 0.950000] ========================================
[ 0.950000] EDID Version 1.3
[ 0.950000] Manufacturer: DEL
[ 0.960000] Model: a019
[ 0.960000] Serial#: 808929100
[ 0.970000] Year: 2007 Week 8
[ 0.970000] Serial Number: HM06472L07GL
[ 0.980000] Monitor Name: DELL 2007WFP
[ 0.980000] Display Characteristics:
[ 0.990000] Monitor Operating Limits: From EDID
[ 0.990000] H: 30-83KHz V: 56-76Hz DCLK: 140MHz
[ 1.000000] Digital Display Input
[ 1.000000] Sync:
[ 1.000000] Max H-size in cm: 43
[ 1.010000] Max V-size in cm: 27
[ 1.010000] Gamma: 2.20
[ 1.020000] DPMS: Active yes, Suspend yes, Standby yes
[ 1.020000] RGB Color Display
[ 1.030000] Chroma
[ 1.030000] RedX: 0.640 RedY: 0.330
[ 1.040000] GreenX: 0.300 GreenY: 0.600
[ 1.040000] BlueX: 0.150 BlueY: 0.060
[ 1.040000] WhiteX: 0.313 WhiteY: 0.329
[ 1.050000] Default color format is primary
[ 1.050000] First DETAILED Timing is preferred
[ 1.060000] Detailed Timings
[ 1.060000] "1680x1050@59" 119 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
[ 1.060000] Supported VESA Modes
[ 1.070000] 720x400@70Hz
[ 1.070000] 640x480@60Hz
[ 1.080000] 640x480@75Hz
[ 1.080000] 800x600@60Hz
[ 1.080000] 800x600@75Hz
[ 1.090000] 1024x768@60Hz
[ 1.090000] 1024x768@75Hz
[ 1.100000] 1280x1024@75Hz
[ 1.100000] Manufacturer's mask: 0
[ 1.100000] Standard Timings
[ 1.110000] 1280x1024@60Hz
[ 1.110000] 1152x864@75Hz
[ 1.110000] Detail Timings
[ 1.120000] ========================================
[ 1.120000] Monitor/TV supported modelines
[ 1.120000] "1680x1050@59" 119.05 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
[ 1.130000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.130000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.130000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.140000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.140000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.140000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.150000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.150000] "1280x1024@75" 135.07 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.160000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.160000] "1152x864@75" 108.03 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
[ 1.160000] PREFERRED geometry 1680 1050 8403
[ 1.170000] PREFERRED timings 8403 80 48 21 3 32 6
[ 1.170000] PREFERRED flag 17 sync 2 vmode 0 preferred
[ 1.180000] 1280x1024@75 pclk=7407 removed (pixclk higher than 7518 limit)
[ 1.180000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.190000] preferred mode geometry 1680 1050 8403
[ 1.190000] preferred mode timings 8403 80 48 21 3 32 6
[ 1.190000] preferred mode flag 17 sync 2 vmode 0 preferred
[ 1.200000] 1024x768@60 pclk=15384 best mode is 1680x1050@59 pclk=8403
[ 1.200000] best mode geometry 1680 1050 8403
[ 1.210000] best mode timings 8403 80 48 21 3 32 6
[ 1.210000] best mode flag 17 sync 2 vmode 0 preferred
[ 1.220000] � geometry 649613804 0 3225759484 3691208187
[ 1.220000] � offset 3225759484 67 274877907 0 3225759484
[ 1.230000] � timings 2147483667 841888032 538976347 841888032 808464434 2121008 3225833316
[ 1.230000] � accel_flags 54 sync 3693032976 vmode 2
[ 1.240000] mxcfb_di_clock_adjust pixelclk=8403 rate=476020000
[ 1.240000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.240000] adjust: parent=pll3 clk=476020000 this=ipu_di0_clk di_clk=119005000 ret=0 ret=0
[ 1.310000] reinit 1680x1050 8403
[ 1.320000] sii9022 1-0039: geometry 1680 1050 1680 1050 16
[ 1.320000] sii9022 1-0039: timings 8403 80 48 21 3 32 6
[ 1.320000] sii9022 1-0039: accel 0 sync 2 vmode=0
[ 1.320000] sii9022 1-0039: pclk 11900 refresh 6024 total x 1840 total y 1080
[ 1.320000] sii9022 1-0039: vmap idx=10 vcode=0
[ 1.320000] hdmi audio mute
[ 1.330000] hdmi audio unmute
In both cases the LCD is found, modes are listed, the screen senses, that there is input, but remains blank.

The above links work for one month from today.

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
steev
 Post subject:
PostPosted: Fri Jan 08, 2010 1:32 pm 
Offline
Genesi

Joined: Tue Feb 07, 2006 4:49 pm
Posts: 145
Location: San Antonio, TX
SOYO - 1680x1050 - http://dpaste.com/142648/
Code:
[ 0.990000] Gamma: 2.20
[ 1.000000] DPMS: Active no, Suspend no, Standby no
[ 1.000000] RGB Color Display
[ 1.000000] Chroma
[ 1.010000] RedX: 0.646 RedY: 0.339
[ 1.010000] GreenX: 0.290 GreenY: 0.603
[ 1.010000] BlueX: 0.145 BlueY: 0.065
[ 1.010000] WhiteX: 0.313 WhiteY: 0.328
[ 1.020000] First DETAILED Timing is preferred
[ 1.020000] Detailed Timings
[ 1.020000] "1680x1050@59" 146 1680 1784 1960 2240 1050 1053 1059 1089 -hsync -vsync
[ 1.030000] Supported VESA Modes
[ 1.030000] 720x400@70Hz
[ 1.030000] 640x480@60Hz
[ 1.030000] 640x480@72Hz
[ 1.040000] 640x480@75Hz
[ 1.040000] 800x600@56Hz
[ 1.040000] 800x600@60Hz
[ 1.050000] 800x600@72Hz
[ 1.050000] 800x600@75Hz
[ 1.050000] 1024x768@60Hz
[ 1.050000] 1024x768@70Hz
[ 1.060000] 1024x768@75Hz
[ 1.060000] 1280x1024@75Hz
[ 1.060000] Manufacturer's mask: 0
[ 1.060000] Standard Timings
[ 1.070000] 1280x1024@60Hz
[ 1.070000] 1280x1024@75Hz
[ 1.070000] 1440x900@60Hz
[ 1.070000] 1440x900@75Hz
[ 1.080000] Detail Timings
[ 1.080000] ========================================
[ 1.080000] Monitor/TV supported modelines
[ 1.080000] "1680x1050@59" 146.220 1680 1784 1960 2240 1050 1053 1059 1089 -hsync -vsync
[ 1.090000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.090000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.090000] "640x480@72" 31.500 640 664 704 832 480 489 491 520 -hsync -vsync
[ 1.100000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.100000] "800x600@56" 36.01 800 824 896 1024 600 601 603 625 +hsync +vsync
[ 1.100000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.110000] "800x600@72" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
[ 1.110000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.110000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.120000] "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 1.120000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.120000] "1280x1024@75" 135.07 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.130000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.130000] "1280x1024@75" 135.07 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.130000] "1440x900@60" 106.780 1440 1523 1675 1910 900 901 904 932 -hsync -vsync
[ 1.140000] "1440x900@75" 136.780 1440 1534 1689 1939 900 901 904 940 -hsync -vsync
[ 1.140000] PREFERRED geometry 1680 1050 6839
[ 1.140000] PREFERRED timings 6839 280 104 30 3 176 6
[ 1.150000] PREFERRED flag 17 sync 0 vmode 0 preferred
[ 1.150000] 1440x900@75 pclk=7311 removed (pixclk higher than 7518 limit)
[ 1.160000] 1280x1024@75 pclk=7407 removed (pixclk higher than 7518 limit)
[ 1.160000] 1680x1050@59 pclk=6839 removed (pixclk higher than 7518 limit)
[ 1.160000] uh-oh! deleted preferred mode!
[ 1.170000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.170000] preferred mode geometry 1680 1050 6839
[ 1.170000] preferred mode timings 6839 280 104 30 3 176 6
[ 1.180000] preferred mode flag 17 sync 0 vmode 0 preferred
[ 1.180000] nearest mode (1680x1050@59 pclk=6839) is 1440x900@60 pclk=9365
[ 1.190000] nearest mode geometry 1440 900 9365
[ 1.190000] nearest mode timings 9365 235 83 28 1 152 3
[ 1.190000] nearest mode flag 0 sync 0 vmode 0
[ 1.200000] mxcfb_di_clock_adjust pixelclk=9365 rate=427120000
[ 1.200000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.210000] adjust: parent=pll3 clk=427120000 this=ipu_di0_clk di_clk=106780000 ret=0 ret=0
[ 1.260000] reinit 1440x900 9365
[ 1.270000] sii9022 1-0039: geometry 1440 900 1440 900 16
[ 1.270000] sii9022 1-0039: timings 9365 235 83 28 1 152 3
[ 1.270000] sii9022 1-0039: accel 0 sync 0 vmode=0
[ 1.270000] sii9022 1-0039: pclk 10678 refresh 6024 total x 1910 total y 932
[ 1.270000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.270000] sii9022 1-0039: vmap idx=10 vcode=0
[ 1.270000] hdmi audio mute
[ 1.280000] hdmi audio unmute
Samsung - 1280x1024 -
Code:
[ 0.750000] *** sii9022_probe
[ 0.750000] *** monitor is detected
[ 0.750000] *** mxc_init_fb vmode= video-mode=4 clock_auto=1
[ 0.750000] mode_option=1280x720-24@60
[ 0.750000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.750000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.770000] Console: switching to colour frame buffer device 160x45
[ 0.790000] *** sii9022 lcd_probe
[ 0.790000] *** sii9022 lcd_init_fb
[ 0.790000] read_edid2
[ 0.820000] 00ffffffffffff004c2de500373153441b0e010380221b782a6f8ba25a4d9424
[ 0.820000] 1a5156bfef0081800101010101010101010101010101302a009851002a403070
[ 0.820000] 1300520e1100001e000000fd00384b1e510e000a202020202020000000fc0053
[ 0.820000] 796e634d61737465720a2020000000ff00484d45583630343238310a202000ef
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] i2c-adapter i2c-1: ACK not received
[ 0.820000] ========================================
[ 0.830000] Display Information (EDID)
[ 0.830000] ========================================
[ 0.840000] EDID Version 1.3
[ 0.840000] Manufacturer: SAM
[ 0.850000] Model: e5
[ 0.850000] Serial#: 1146302775
[ 0.860000] Year: 2004 Week 27
[ 0.860000] Monitor Name: SyncMaster
[ 0.860000] Serial Number: HMEX604281
[ 0.870000] Display Characteristics:
[ 0.870000] Monitor Operating Limits: From EDID
[ 0.880000] H: 30-81KHz V: 56-75Hz DCLK: 140MHz
[ 0.880000] Digital Display Input
[ 0.880000] Sync:
[ 0.890000] Max H-size in cm: 34
[ 0.900000] Max V-size in cm: 27
[ 0.900000] Gamma: 2.20
[ 0.900000] DPMS: Active yes, Suspend no, Standby no
[ 0.910000] RGB Color Display
[ 0.910000] Chroma
[ 0.920000] RedX: 0.634 RedY: 0.354
[ 0.920000] GreenX: 0.304 GreenY: 0.581
[ 0.920000] BlueX: 0.143 BlueY: 0.102
[ 0.930000] WhiteX: 0.318 WhiteY: 0.339
[ 0.930000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.940000] "1280x1024@60" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 0.940000] Supported VESA Modes
[ 0.950000] 720x400@70Hz
[ 0.950000] 640x480@60Hz
[ 0.960000] 640x480@67Hz
[ 0.960000] 640x480@72Hz
[ 0.960000] 640x480@75Hz
[ 0.970000] 800x600@56Hz
[ 0.970000] 800x600@60Hz
[ 0.980000] 800x600@72Hz
[ 0.980000] 800x600@75Hz
[ 0.980000] 832x624@75Hz
[ 0.990000] 1024x768@60Hz
[ 0.990000] 1024x768@70Hz
[ 0.990000] 1024x768@75Hz
[ 0.990000] 1280x1024@75Hz
[ 1.000000] Manufacturer's mask: 0
[ 1.000000] Standard Timings
[ 1.000000] 1280x1024@60Hz
[ 1.010000] Detail Timings
[ 1.010000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.020000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.020000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.020000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.030000] "640x480@67" 27.106 640 661 725 810 480 481 484 499 -hsync -vsync
[ 1.030000] "640x480@72" 31.500 640 664 704 832 480 489 491 520 -hsync -vsync
[ 1.030000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.040000] "800x600@56" 36.01 800 824 896 1024 600 601 603 625 +hsync +vsync
[ 1.040000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.040000] "800x600@72" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
[ 1.050000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.050000] "832x624@75" 53.433 832 875 962 1092 624 625 628 652 -hsync -vsync
[ 1.050000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.060000] "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 1.060000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.060000] "1280x1024@75" 135.07 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.070000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.070000] PREFERRED geometry 1280 1024 9259
[ 1.070000] PREFERRED timings 9259 248 48 38 1 112 3
[ 1.080000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.080000] 1280x1024@75 pclk=7407 removed (pixclk higher than 7518 limit)
[ 1.080000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.090000] preferred mode geometry 1280 1024 9259
[ 1.090000] preferred mode timings 9259 248 48 38 1 112 3
[ 1.100000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.100000] best mode is 1280x1024@60 pclk=9259
[ 1.100000] best mode geometry 1280 1024 9259
[ 1.110000] best mode timings 9259 248 48 38 1 112 3
[ 1.110000] best mode flag 17 sync 3 vmode 0 preferred
[ 1.110000] mxcfb_di_clock_adjust pixelclk=9259 rate=432012000
[ 1.120000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.120000] adjust: parent=pll3 clk=432012000 this=ipu_di0_clk di_clk=108003000 ret=0 ret=0
[ 1.180000] reinit 1280x1024 9259
[ 1.180000] sii9022 1-0039: geometry 1280 1024 1280 1024 16
[ 1.180000] sii9022 1-0039: timings 9259 248 48 38 1 112 3
[ 1.180000] sii9022 1-0039: accel 0 sync 3 vmode=0
[ 1.180000] sii9022 1-0039: pclk 10800 refresh 6024 total x 1688 total y 1066
[ 1.180000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.190000] sii9022 1-0039: vmap idx=0 vcode=0
[ 1.190000] hdmi audio mute
[ 1.200000] hdmi audio unmute
[ 1.430000] Serial: MXC Internal UART driver
[ 1.430000] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
[ 1.430000] console [ttymxc0] enabled
[ 3.140000] mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX
[ 3.160000] mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX
On the Samsung I do get video for a split second but then it goes back to just a black screen (signal but no video)


Last edited by steev on Mon Jan 11, 2010 8:15 am, edited 2 times in total.

Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Fri Jan 08, 2010 9:16 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
SOYO - 1680x1050 - http://dpaste.com/142648/

Still haven't had a chance to test the Samsung
Actually I think I'd prefer them here in a |code| block for posterity. pastebin and dpaste tend to time out or clean up old URLs so the forum won't link anywhere reasonable for more than a couple months :)

Peter, you're not running the latest!

steev, can you get the top part? It'd be good to know the maximum limits of the monitor.

_________________
Matt Sealey
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Sat Jan 09, 2010 8:13 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
Here it is for the 1280x1024 one with the latest kernel:
Code:
[ 0.750000] *** sii9022_probe
[ 0.750000] *** monitor is detected
[ 0.750000] *** mxc_init_fb vmode= video-mode=4 clock_auto=1
[ 0.750000] mode_option=1280x720-24@60
[ 0.750000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.750000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.770000] Console: switching to colour frame buffer device 160x45
[ 0.790000] *** sii9022 lcd_probe
[ 0.790000] *** sii9022 lcd_init_fb
[ 0.790000] read_edid2
[ 0.820000] 00ffffffffffff001e6d654b1c2f04000a110103ea261e78ea3231a3574c9d25
[ 0.820000] 115054a56a80314f454f614f81800101010101010101302a009851002a403070
[ 0.820000] 1300520e1100001e000000fd00384b1e470b000a202020202020000000fc004c
[ 0.820000] 313935340a20202020202020000000fc00200a2020202020202020202020001d
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] i2c-adapter i2c-1: ACK not received
[ 0.820000] ========================================
[ 0.830000] Display Information (EDID)
[ 0.830000] ========================================
[ 0.840000] EDID Version 1.3
[ 0.840000] Manufacturer: GSM
[ 0.850000] Model: 4b65
[ 0.850000] Serial#: 274204
[ 0.860000] Year: 2007 Week 10
[ 0.860000] Monitor Name: L1954
[ 0.860000] Monitor Name:
[ 0.870000] Display Characteristics:
[ 0.870000] Monitor Operating Limits: From EDID
[ 0.880000] H: 30-71KHz V: 56-75Hz DCLK: 110MHz
[ 0.880000] Digital Display Input
[ 0.880000] Sync: Separate Sync on Green
[ 0.890000] Max H-size in cm: 38
[ 0.890000] Max V-size in cm: 30
[ 0.900000] Gamma: 2.20
[ 0.900000] DPMS: Active yes, Suspend yes, Standby yes
[ 0.910000] RGB Color Display
[ 0.910000] Chroma
[ 0.920000] RedX: 0.637 RedY: 0.343
[ 0.920000] GreenX: 0.297 GreenY: 0.615
[ 0.920000] BlueX: 0.145 BlueY: 0.069
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.930000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.940000] "1280x1024@60" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 0.940000] Supported VESA Modes
[ 0.950000] 720x400@70Hz
[ 0.950000] 640x480@60Hz
[ 0.960000] 640x480@75Hz
[ 0.960000] 800x600@60Hz
[ 0.960000] 800x600@75Hz
[ 0.970000] 832x624@75Hz
[ 0.970000] 1024x768@60Hz
[ 0.970000] 1024x768@75Hz
[ 0.980000] 1152x870@75Hz
[ 0.980000] Manufacturer's mask: 0
[ 0.980000] Standard Timings
[ 0.990000] 640x480@75Hz
[ 0.990000] 800x600@75Hz
[ 0.990000] 1024x768@75Hz
[ 1.000000] 1280x1024@60Hz
[ 1.000000] Detail Timings
[ 1.000000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.010000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.010000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.020000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.020000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.020000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.030000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.030000] "832x624@75" 53.433 832 875 962 1092 624 625 628 652 -hsync -vsync
[ 1.030000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.040000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.040000] "1152x864@75" 108.03 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
[ 1.050000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.050000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.050000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.060000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.060000] PREFERRED geometry 1280 1024 9259
[ 1.070000] PREFERRED timings 9259 248 48 38 1 112 3
[ 1.070000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.070000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.080000] preferred mode geometry 1280 1024 9259
[ 1.080000] preferred mode timings 9259 248 48 38 1 112 3
[ 1.090000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.090000] best mode is 1280x1024@60 pclk=9259
[ 1.100000] best mode geometry 1280 1024 9259
[ 1.100000] best mode timings 9259 248 48 38 1 112 3
[ 1.100000] best mode flag 17 sync 3 vmode 0 preferred
[ 1.110000] mxcfb_di_clock_adjust pixelclk=9259 rate=432012000
[ 1.110000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.120000] adjust: parent=pll3 clk=432012000 this=ipu_di0_clk di_clk=108003000 ret=0 ret=0
[ 1.170000] reinit 1280x1024 9259
[ 1.180000] sii9022 1-0039: geometry 1280 1024 1280 1024 16
[ 1.180000] sii9022 1-0039: timings 9259 248 48 38 1 112 3
[ 1.180000] sii9022 1-0039: accel 0 sync 3 vmode=0
[ 1.180000] sii9022 1-0039: pclk 10800 refresh 6024 total x 1688 total y 1066
[ 1.180000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.180000] sii9022 1-0039: vmap idx=0 vcode=0
[ 1.180000] hdmi audio mute
[ 1.190000] hdmi audio unmute

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
clazious
 Post subject:
PostPosted: Sun Jan 10, 2010 12:29 am 
Offline

Joined: Mon Dec 07, 2009 8:08 pm
Posts: 10
TV is 1366x768 according to documentation. Recent kernel update got me video, but it's at 1280x720. It's fuzzy. Beyond that, the edges of the screen aren't on the screen. Otherwise it now works fine.
Code:
no, Standby no
[ 0.910000] RGB Color Display
[ 0.920000] Chroma
[ 0.920000] RedX: 0.640 RedY: 0.330
[ 0.920000] GreenX: 0.300 GreenY: 0.600
[ 0.930000] BlueX: 0.150 BlueY: 0.060
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.940000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.950000] "1280x720@60" 74 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 0.950000] "1920x1080i@60" 74 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 0.950000] Supported VESA Modes
[ 0.960000] 640x480@60Hz
[ 0.960000] Manufacturer's mask: 0
[ 0.970000] Standard Timings
[ 0.970000] Detail Timings
[ 0.980000] ----------------------------------------
[ 0.980000] EIA/CEA-861 Information
[ 0.990000] Revision number: 3
[ 0.990000] DTV underscan: Not supported
[ 0.990000] Basic audio: Supported
[ 1.000000] Detailed Timings
[ 1.000000] "720x480@59" 27 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.010000] "1920x1080@60" 148 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 1.010000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.020000] "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.020000] "1920x1080i@60" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 1.030000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.030000] "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.040000] "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 1.040000] PREFERRED geometry 1280 720 13468
[ 1.050000] PREFERRED timings 13468 220 110 20 5 40 5
[ 1.050000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.060000] 1920x1080@60 pclk=6734 removed (pixclk higher than 7518 limit)
[ 1.060000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.070000] preferred mode geometry 1280 720 13468
[ 1.070000] preferred mode timings 13468 220 110 20 5 40 5
[ 1.080000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.080000] best mode is 1280x720@60 pclk=13468
[ 1.090000] best mode geometry 1280 720 13468
[ 1.090000] best mode timings 13468 220 110 20 5 40 5
[ 1.100000] best mode flag 17 sync 3 vmode 0 preferred
[ 1.100000] mxcfb_di_clock_adjust pixelclk=13468 rate=297000000
[ 1.110000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.110000] adjust: parent=pll3 clk=297000000 this=ipu_di0_clk di_clk=74250000 ret=0 ret=0
[ 1.160000] reinit 1280x720 13468
[ 1.170000] sii9022 1-0039: geometry 1280 720 1280 720 16
[ 1.170000] sii9022 1-0039: timings 13468 220 110 20 5 40 5
[ 1.180000] sii9022 1-0039: accel 0 sync 3 vmode=0
[ 1.180000] sii9022 1-0039: pclk 7425 refresh 6024 total x 1650 total y 750
[ 1.190000] sii9022 1-0039: vmap idx=6 vcode=4
[ 1.200000] hdmi audio mute
[ 1.210000] hdmi audio unmute


Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Sun Jan 10, 2010 11:23 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
TV is 1366x768 according to documentation. Recent kernel update got me video, but it's at 1280x720. It's fuzzy. Beyond that, the edges of the screen aren't on the screen. Otherwise it now works fine.
Code:
no, Standby no
[ 0.910000] RGB Color Display
[ 0.920000] Chroma
[ 0.920000] RedX: 0.640 RedY: 0.330
[ 0.920000] GreenX: 0.300 GreenY: 0.600
[ 0.930000] BlueX: 0.150 BlueY: 0.060
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.940000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.950000] "1280x720@60" 74 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 0.950000] "1920x1080i@60" 74 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 0.950000] Supported VESA Modes
[ 0.960000] 640x480@60Hz
[ 0.960000] Manufacturer's mask: 0
[ 0.970000] Standard Timings
[ 0.970000] Detail Timings
[ 0.980000] ----------------------------------------
[ 0.980000] EIA/CEA-861 Information
[ 0.990000] Revision number: 3
[ 0.990000] DTV underscan: Not supported
[ 0.990000] Basic audio: Supported
[ 1.000000] Detailed Timings
[ 1.000000] "720x480@59" 27 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.010000] "1920x1080@60" 148 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 1.010000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.020000] "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.020000] "1920x1080i@60" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 1.030000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.030000] "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.040000] "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Really need the top half of this log output so we know what monitor it is :)

_________________
Matt Sealey
Top
   
Reply with quote  
clazious
 Post subject:
PostPosted: Sun Jan 10, 2010 2:00 pm 
Offline

Joined: Mon Dec 07, 2009 8:08 pm
Posts: 10
Quote:
Quote:
TV is 1366x768 according to documentation. Recent kernel update got me video, but it's at 1280x720. It's fuzzy. Beyond that, the edges of the screen aren't on the screen. Otherwise it now works fine.
Code:
no, Standby no
[ 0.910000] RGB Color Display
[ 0.920000] Chroma
[ 0.920000] RedX: 0.640 RedY: 0.330
[ 0.920000] GreenX: 0.300 GreenY: 0.600
[ 0.930000] BlueX: 0.150 BlueY: 0.060
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.940000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.950000] "1280x720@60" 74 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 0.950000] "1920x1080i@60" 74 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 0.950000] Supported VESA Modes
[ 0.960000] 640x480@60Hz
[ 0.960000] Manufacturer's mask: 0
[ 0.970000] Standard Timings
[ 0.970000] Detail Timings
[ 0.980000] ----------------------------------------
[ 0.980000] EIA/CEA-861 Information
[ 0.990000] Revision number: 3
[ 0.990000] DTV underscan: Not supported
[ 0.990000] Basic audio: Supported
[ 1.000000] Detailed Timings
[ 1.000000] "720x480@59" 27 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.010000] "1920x1080@60" 148 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 1.010000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.020000] "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.020000] "1920x1080i@60" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 1.030000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.030000] "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 1.040000] "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Really need the top half of this log output so we know what monitor it is :)
I did dmesg > dmesg.txt and copied the full contents from that here.
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Sun Jan 10, 2010 2:49 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
I did dmesg > dmesg.txt and copied the full contents from that here.
Okay, just a make and model number would be good then?

_________________
Matt Sealey
Top
   
Reply with quote  
clazious
 Post subject:
PostPosted: Sun Jan 10, 2010 4:19 pm 
Offline

Joined: Mon Dec 07, 2009 8:08 pm
Posts: 10
Quote:
Quote:
I did dmesg > dmesg.txt and copied the full contents from that here.
Okay, just a make and model number would be good then?
samsung model no. LN26B360C5D
model code LN26B360C5DXZA
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Mon Jan 11, 2010 12:00 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
Quote:
I did dmesg > dmesg.txt and copied the full contents from that here.
Okay, just a make and model number would be good then?
samsung model no. LN26B360C5D
model code LN26B360C5DXZA
Good to know. I have an idea that may take some time to write but it would mean being able to add a quirk for monitors that miss their native mode..

It'd be really helpful if you could paste the top of the log from a serial console or so though :)

_________________
Matt Sealey
Top
   
Reply with quote  
chouimat
 Post subject:
PostPosted: Tue Jan 12, 2010 10:36 am 
Offline

Joined: Tue Dec 20, 2005 12:47 pm
Posts: 1
Since I updated to the new kernel
I lost all display on my HDTV.
it look like the driver try to use 1920x1080 instead of 1360x768 ... is there a way to force the mode in uboot?
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Jan 12, 2010 11:34 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Since I updated to the new kernel
I lost all display on my HDTV.
it look like the driver try to use 1920x1080 instead of 1360x768 ... is there a way to force the mode in uboot?
Yes, try using the vmode= argument to the kernel (it will take a standard Linux mode descriptor like 1360x768MR@60)

_________________
Matt Sealey
Top
   
Reply with quote  
czp
 Post subject:
PostPosted: Thu Jan 14, 2010 9:26 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
I tried to use vmode=800x600@60 (and also with MR), but no success. It mentions 800x600 in dmesg quite early, but at the end it still tries to set the preferred resolution of 1280x1024 and fails.
Code:
[ 0.750000] *** sii9022_probe
[ 0.750000] *** monitor is detected
[ 0.750000] *** mxc_init_fb vmode=800x600@60 video-mode=4 clock_auto=1
[ 0.750000] mode_option=1280x720-24@60
[ 0.750000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.750000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.770000] Console: switching to colour frame buffer device 160x45
[ 0.790000] *** sii9022 lcd_probe
[ 0.790000] *** sii9022 lcd_init_fb
[ 0.790000] read_edid2
[ 0.820000] 00ffffffffffff001e6d654b1c2f04000a110103ea261e78ea3231a3574c9d25
[ 0.820000] 115054a56a80314f454f614f81800101010101010101302a009851002a403070
[ 0.820000] 1300520e1100001e000000fd00384b1e470b000a202020202020000000fc004c
[ 0.820000] 313935340a20202020202020000000fc00200a2020202020202020202020001d
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[ 0.820000] i2c-adapter i2c-1: ACK not received
[ 0.820000] ========================================
[ 0.830000] Display Information (EDID)
[ 0.830000] ========================================
[ 0.840000] EDID Version 1.3
[ 0.840000] Manufacturer: GSM
[ 0.850000] Model: 4b65
[ 0.850000] Serial#: 274204
[ 0.860000] Year: 2007 Week 10
[ 0.860000] Monitor Name: L1954
[ 0.870000] Monitor Name:
[ 0.870000] Display Characteristics:
[ 0.870000] Monitor Operating Limits: From EDID
[ 0.880000] H: 30-71KHz V: 56-75Hz DCLK: 110MHz
[ 0.880000] Digital Display Input
[ 0.880000] Sync: Separate Sync on Green
[ 0.890000] Max H-size in cm: 38
[ 0.900000] Max V-size in cm: 30
[ 0.900000] Gamma: 2.20
[ 0.900000] DPMS: Active yes, Suspend yes, Standby yes
[ 0.910000] RGB Color Display
[ 0.910000] Chroma
[ 0.920000] RedX: 0.637 RedY: 0.343
[ 0.920000] GreenX: 0.297 GreenY: 0.615
[ 0.920000] BlueX: 0.145 BlueY: 0.069
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.930000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.940000] "1280x1024@60" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 0.940000] Supported VESA Modes
[ 0.950000] 720x400@70Hz
[ 0.950000] 640x480@60Hz
[ 0.960000] 640x480@75Hz
[ 0.960000] 800x600@60Hz
[ 0.960000] 800x600@75Hz
[ 0.970000] 832x624@75Hz
[ 0.970000] 1024x768@60Hz
[ 0.980000] 1024x768@75Hz
[ 0.980000] 1152x870@75Hz
[ 0.980000] Manufacturer's mask: 0
[ 0.990000] Standard Timings
[ 0.990000] 640x480@75Hz
[ 0.990000] 800x600@75Hz
[ 0.990000] 1024x768@75Hz
[ 1.000000] 1280x1024@60Hz
[ 1.000000] Detail Timings
[ 1.000000] ========================================
[ 1.010000] Monitor/TV supported modelines
[ 1.010000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.010000] "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync
[ 1.020000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.020000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.020000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.030000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.030000] "832x624@75" 53.433 832 875 962 1092 624 625 628 652 -hsync -vsync
[ 1.040000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.040000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.040000] "1152x864@75" 108.03 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
[ 1.050000] "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync
[ 1.050000] "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync
[ 1.050000] "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
[ 1.060000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.060000] PREFERRED geometry 1280 1024 9259
[ 1.070000] PREFERRED timings 9259 248 48 38 1 112 3
[ 1.070000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.080000] mxcfb_update_default_var mode_opt=<NULL> vmode=800x600@60
[ 1.080000] preferred mode geometry 1280 1024 9259
[ 1.080000] preferred mode timings 9259 248 48 38 1 112 3
[ 1.090000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.090000] best mode is 1280x1024@60 pclk=9259
[ 1.100000] best mode geometry 1280 1024 9259
[ 1.100000] best mode timings 9259 248 48 38 1 112 3
[ 1.110000] best mode flag 17 sync 3 vmode 0 preferred
[ 1.110000] mxcfb_di_clock_adjust pixelclk=9259 rate=432012000
[ 1.120000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.120000] adjust: parent=pll3 clk=432012000 this=ipu_di0_clk di_clk=108003000 ret=0 ret=0
[ 1.170000] reinit 1280x1024 9259
[ 1.180000] sii9022 1-0039: geometry 1280 1024 1280 1024 16
[ 1.180000] sii9022 1-0039: timings 9259 248 48 38 1 112 3
[ 1.180000] sii9022 1-0039: accel 0 sync 3 vmode=0
[ 1.180000] sii9022 1-0039: pclk 10800 refresh 6024 total x 1688 total y 1066
[ 1.180000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.180000] sii9022 1-0039: vmap idx=0 vcode=0
[ 1.180000] hdmi audio mute
[ 1.190000] hdmi audio unmute

_________________
CzP
http://czanik.blogs.balabit.com/
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Thu Jan 14, 2010 10:46 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
I tried to use vmode=800x600@60 (and also with MR), but no success. It mentions 800x600 in dmesg quite early, but at the end it still tries to set the preferred resolution of 1280x1024 and fails.
My bad. The autodetection code will override any command-line specified modelines..

This will be fixed in the kernel next week.

_________________
Matt Sealey
Top
   
Reply with quote  
beavis
 Post subject:
PostPosted: Sat Jan 16, 2010 6:49 pm 
Offline

Joined: Mon Nov 02, 2009 10:05 am
Posts: 8
Hi. I just upgraded U-Boot and kernel to the latest available. The HDMI display is now yellow and although a pattern for character and X modes is recognizable, they are very far from legible and the display goes black every few seconds.

Below is the dmesg output. It looks to me like the native resolution/timing for monitor is chosen ( 1920x1080 on Samsung SyncMaster XL2370 ). FWIW, the console would display correctly on same monitor prior to upgrade ( did not record dmesg output from prior kernel ).

Any suggestions appreciated.

Sven

___________________________________________
U-Boot 2009.01-1.1.7-efikamx (Dec 21 2009 - 14:00:56)

CPU: Freescale i.MX51 family 2.5V at 400 MHz
mx51 pll1: 800MHz
mx51 pll2: 665MHz
mx51 pll3: 216MHz
ipg clock : 66500000Hz
ipg per clock : 665000000Hz
uart clock : 66500000Hz
cspi clock : 54000000Hz
Board: Genesi Efika MX [POR]
DRAM: 512 MB
JEDEC ID: 0xbf:0x25:0x4a
Reading SPI NOR flash 0x40000 [0x10000 bytes] -> ram 0x975f06e8
.SUCCESS

*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Boot Source: SPI NOR FLASH BOOT
board rev1.1
board rev1.1
No MMC card found

** Unable to use mmc 0:1 for fatls **

** Unable to use mmc 0:1 for fatload **
Type ID = 0
Boot Cmd: run pata_boot
Hit any key to stop autoboot: 0
EfikaMX > boot
Write reg = 15 value = 0x00400022

Reset IDE: Bus 0: OK
Device 0: Model: Flash Module Firm: Ver2.M1B Ser#: 38A3079B040000001760
Type: Hard Disk
Capacity: 3679.5 MB = 3.5 GB (7535808 x 512)
reading uImage

2366884 bytes read
## Booting kernel from Legacy Image at 90007fc0 ...
Image Name: Linux-2.6.31.9-ER1-efikamx
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2366820 Bytes = 2.3 MB
Load Address: 90008000
Entry Point: 90008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux..........................................................................................................................................
[ 0.000000] Linux version 2.6.31.9-ER1-efikamx (neko@eriol) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #11 Thu Jan 7 18:58:55 CST 2010
[ 0.000000] CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Efika MX
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: noinitrd console=ttymxc0,115200 console=tty1 root=/dev/sda2 rw hdmi
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 480MB = 480MB total
[ 0.000000] Memory: 482572KB available (3980K code, 290K data, 108K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:272
[ 0.000000] MXC IRQ initialized
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[ 0.230000] Mount-cache hash table entries: 512
[ 0.230000] CPU: Testing write buffer coherency: ok
[ 0.230000] regulator: core version 0.5
[ 0.230000] NET: Registered protocol family 16
[ 0.230000] /proc/ioctl created
[ 0.230000] CPU is i.MX51 Revision 2.5
[ 0.230000] MXC GPIO hardware
[ 0.330000] IRAM READY
[ 0.330000] mxc_init_dvfs_per initialised
[ 0.330000] board ID: 1.1
[ 0.330000] Using SDMA I.API
[ 0.330000] MXC DMA API initialized
[ 0.340000] bio: create slab <bio-0> at 0
[ 0.340000] SCSI subsystem initialized
[ 0.340000] CSPI: mxc_spi-0 probed
[ 0.340000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.340000] usbcore: registered new device driver usb
[ 0.340000] MXC I2C driver
[ 0.340000] MXC I2C driver
[ 0.340000] MXC HS I2C driver
[ 0.350000] mc13892 Rev 2.0 FinVer 2 detected
[ 0.380000] Initializing regulators for Efika MX
[ 0.490000] regulator: SW1: 600 <--> 1375 mV
[ 0.520000] regulator: SW2: 900 <--> 1850 mV
[ 0.520000] regulator: SW3: 1100 <--> 1850 mV
[ 0.520000] regulator: SW4: 1100 <--> 1850 mV
[ 0.520000] regulator: SWBST: 0 mV
[ 0.540000] regulator: VIOHI: 0 mV
[ 0.560000] regulator: VPLL: 1050 <--> 1800 mV
[ 0.580000] regulator: VDIG: 1050 <--> 1800 mV
[ 0.580000] regulator: VSD: 1800 <--> 3150 mV
[ 0.600000] regulator: VUSB2: 2400 <--> 2775 mV
[ 0.640000] regulator: VVIDEO: 2775 mV
[ 0.640000] regulator: VAUDIO: 2300 <--> 3000 mV
[ 0.640000] regulator: VCAM: 2500 <--> 3000 mV fast normal
[ 0.640000] regulator: VGEN1: 1200 <--> 3150 mV
[ 0.640000] regulator: VGEN2: 1200 <--> 3150 mV
[ 0.640000] regulator: VGEN3: 1800 <--> 2900 mV
[ 0.660000] regulator: VUSB: 0 mV
[ 0.660000] regulator: GPO1: 0 mV
[ 0.660000] regulator: GPO2: 0 mV
[ 0.660000] regulator: GPO3: 0 mV
[ 0.660000] regulator: GPO4: 0 mV
[ 0.740000] Device spi1.0 probed
[ 0.740000] NET: Registered protocol family 2
[ 0.740000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.740000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.740000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.740000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.740000] TCP reno registered
[ 0.740000] NET: Registered protocol family 1
[ 0.740000] LPMode driver module loaded
[ 0.740000] Static Power Management for Freescale i.MX51
[ 0.740000] PM driver module loaded
[ 0.740000] sdram autogating driver module loaded
[ 0.740000] Bus freq driver module loaded
[ 0.740000] usb: Host 1 host (isp1504) registered
[ 0.740000] usb: DR host (utmi) registered
[ 0.740000] mxc_dvfs_core_probe
[ 0.740000] DVFS driver module loaded
[ 0.740000] i.MXC CPU frequency driver
[ 0.740000] DVFS PER driver module loaded
[ 0.740000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.740000] msgmni has been set to 942
[ 0.750000] alg: No test for stdrng (krng)
[ 0.750000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.750000] io scheduler noop registered
[ 0.750000] io scheduler cfq registered (default)
[ 0.750000] *** sii9022_probe
[ 0.750000] *** monitor is detected
[ 0.750000] *** mxc_init_fb vmode= video-mode=4 clock_auto=1
[ 0.750000] mode_option=1280x720-24@60
[ 0.750000] mxc_ipu mxc_ipu: Channel already disabled 9
[ 0.750000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 0.770000] Console: switching to colour frame buffer device 160x45
[ 0.790000] *** sii9022 lcd_probe
[ 0.790000] *** sii9022 lcd_init_fb
[ 0.790000] read_edid2
[ 0.820000] 00ffffffffffff004c2dc505333246452a130103801009782aee91a3544c9926
[ 0.820000] 0f5054230800a9408180814081009500b30001010101023a801871382d40582c
[ 0.820000] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd0032
[ 0.820000] 3c1b5111000a202020202020000000fc0053796e634d61737465720a202001c1
[ 0.820000] 02031cf14890041f0514130312230907078301000066030c00100080011d80d0
[ 0.820000] 721c1620102c2580a05a0000009e011d8018711c1620582c2500a05a0000009e
[ 0.820000] 011d00bc52d01e20b8285540a05a0000001e011d007251d01e206e285500a05a
[ 0.820000] 0000001e8c0ad090204031200c405500a05a0000001800000000000000000077
[ 0.820000] i2c-adapter i2c-1: ACK not received
[ 0.820000] ========================================
[ 0.830000] Display Information (EDID)
[ 0.830000] ========================================
[ 0.840000] EDID Version 1.3
[ 0.840000] Manufacturer: SAM
[ 0.850000] Model: 5c5
[ 0.850000] Serial#: 1162228275
[ 0.860000] Year: 2009 Week 42
[ 0.860000] Monitor Name: SyncMaster
[ 0.870000] Display Characteristics:
[ 0.870000] Monitor Operating Limits: From EDID
[ 0.880000] H: 27-81KHz V: 50-60Hz DCLK: 170MHz
[ 0.880000] Digital Display Input
[ 0.880000] Sync:
[ 0.890000] Max H-size in cm: 16
[ 0.900000] Max V-size in cm: 9
[ 0.900000] Gamma: 2.20
[ 0.910000] DPMS: Active yes, Suspend no, Standby no
[ 0.910000] RGB Color Display
[ 0.920000] Chroma
[ 0.920000] RedX: 0.640 RedY: 0.330
[ 0.930000] GreenX: 0.300 GreenY: 0.600
[ 0.930000] BlueX: 0.150 BlueY: 0.060
[ 0.930000] WhiteX: 0.313 WhiteY: 0.329
[ 0.940000] First DETAILED Timing is preferred
[ 0.940000] Detailed Timings
[ 0.950000] "1920x1080@60" 148 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 0.950000] "1280x720@60" 74 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 0.960000] Supported VESA Modes
[ 0.960000] 640x480@60Hz
[ 0.970000] 800x600@56Hz
[ 0.970000] 800x600@60Hz
[ 0.980000] 1024x768@60Hz
[ 0.980000] Manufacturer's mask: 0
[ 0.980000] Standard Timings
[ 0.990000] 1600x1200@60Hz
[ 0.990000] 1280x1024@60Hz
[ 1.000000] 1280x960@60Hz
[ 1.000000] 1280x800@60Hz
[ 1.000000] 1440x900@60Hz
[ 1.010000] 1680x1050@60Hz
[ 1.010000] Detail Timings
[ 1.020000] ----------------------------------------
[ 1.020000] EIA/CEA-861 Information
[ 1.020000] Revision number: 3
[ 1.030000] DTV underscan: Supported
[ 1.030000] Basic audio: Supported
[ 1.030000] Detailed Timings
[ 1.040000] "1920x1080i@50" 74 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync
[ 1.040000] "1920x1080i@60" 74 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 1.040000] "1280x720@50" 74 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 1.050000] "1280x720@60" 74 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.050000] "720x576@50" 27 720 732 796 864 576 581 586 625 -hsync -vsync
[ 1.050000] ========================================
[ 1.060000] Monitor/TV supported modelines
[ 1.060000] "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 1.070000] "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.070000] "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 1.070000] "800x600@56" 36.01 800 824 896 1024 600 601 603 625 +hsync +vsync
[ 1.080000] "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
[ 1.080000] "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 1.090000] "1600x1200@60" 162.22 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
[ 1.090000] "1280x1024@60" 108.03 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
[ 1.100000] "1280x960@60" 108.03 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
[ 1.100000] "1280x800@60" 83.647 1280 1347 1481 1683 800 801 804 828 -hsync -vsync
[ 1.100000] "1440x900@60" 106.780 1440 1523 1675 1910 900 901 904 932 -hsync -vsync
[ 1.110000] "1680x1050@60" 146.864 1680 1786 1966 2252 1050 1051 1054 1087 -hsync -vsync
[ 1.110000] "1920x1080i@50" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync
[ 1.120000] "1920x1080i@60" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 1.120000] "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 1.130000] "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 1.130000] "720x576@50" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync
[ 1.140000] 1280x720@60 pclk=13468 removed (interlaced)
[ 1.140000] PREFERRED geometry 1920 1080 6734
[ 1.150000] PREFERRED timings 6734 148 88 36 4 44 5
[ 1.150000] PREFERRED flag 17 sync 3 vmode 0 preferred
[ 1.160000] 1680x1050@60 pclk=6809 removed (pixclk higher than 7518 limit)
[ 1.160000] 1600x1200@60 pclk=6172 removed (pixclk higher than 7518 limit)
[ 1.170000] 1920x1080@60 pclk=6734 removed (pixclk higher than 7518 limit)
[ 1.170000] uh-oh! deleted preferred mode!
[ 1.180000] mxcfb_update_default_var mode_opt=<NULL> vmode=
[ 1.180000] preferred mode geometry 1920 1080 6734
[ 1.190000] preferred mode timings 6734 148 88 36 4 44 5
[ 1.190000] preferred mode flag 17 sync 3 vmode 0 preferred
[ 1.200000] nearest mode (1920x1080@60 pclk=6734) is 1920x1080@60 pclk=13468
[ 1.200000] nearest mode geometry 1920 1080 13468
[ 1.210000] nearest mode timings 13468 148 88 30 4 44 10
[ 1.210000] nearest mode flag 1 sync 3 vmode 1
[ 1.220000] mxcfb_di_clock_adjust pixelclk=13468 rate=297000000
[ 1.220000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[ 1.230000] adjust: parent=pll3 clk=297000000 this=ipu_di0_clk di_clk=74250000 ret=0 ret=0
[ 1.310000] reinit 1920x1080 13468
[ 1.320000] sii9022 1-0039: geometry 1920 1080 1920 1080 16
[ 1.320000] sii9022 1-0039: timings 13468 148 88 30 4 44 10
[ 1.320000] sii9022 1-0039: accel 0 sync 3 vmode=1
[ 1.320000] sii9022 1-0039: pclk 7425 refresh 3003 total x 2200 total y 1124
[ 1.320000] mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_10 = 0x00080000
[ 1.320000] sii9022 1-0039: vmap idx=12 vcode=34
[ 1.320000] hdmi audio mute
[ 1.330000] hdmi audio unmute
[ 1.560000] Serial: MXC Internal UART driver
[ 1.560000] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
[ 1.560000] console [ttymxc0] enabled
[ 3.480000] mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX
[ 3.500000] mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX
[ 3.520000] loop: module loaded
[ 3.520000] pata_fsl pata_fsl: rchan=29 wchan=28
[ 3.530000] scsi0 : pata_fsl
[ 3.540000] ata1: PATA max UDMA/44 irq 70
[ 3.560000] usbmon: debugfs is not available
[ 3.560000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.730000] ata1.00: CFA: Flash Module, Ver2.M1B, max UDMA/100
[ 3.740000] ata1.00: 7535808 sectors, multi 1: LBA
[ 3.770000] ata1.00: configured for UDMA/44
[ 3.780000] scsi 0:0:0:0: Direct-Access ATA Flash Module Ver2 PQ: 0 ANSI: 5
[ 3.790000] sd 0:0:0:0: [sda] 7535808 512-byte logical blocks: (3.85 GB/3.59 GiB)
[ 3.810000] sd 0:0:0:0: [sda] Write Protect is off
[ 3.820000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.830000] sda:
[ 3.830000] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 3.850000] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 3.860000] sda1 sda2
[ 3.870000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.890000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.900000] fsl-ehci fsl-ehci.0: irq 14, io base 0x73f80200
[ 3.930000] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 3.940000] usb usb1: configuration #1 chosen from 1 choice
[ 3.950000] hub 1-0:1.0: USB hub found
[ 3.960000] hub 1-0:1.0: 1 port detected
[ 4.080000] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 4.090000] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 4.130000] fsl-ehci fsl-ehci.1: irq 18, io base 0x73f80000
[ 4.160000] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 4.170000] usb usb2: configuration #1 chosen from 1 choice
[ 4.180000] hub 2-0:1.0: USB hub found
[ 4.190000] hub 2-0:1.0: 1 port detected
[ 4.200000] usbcore: registered new interface driver libusual
[ 4.210000] mice: PS/2 mouse device common for all mice
[ 4.220000] MXC keypad loaded
[ 4.230000] mc13892 rtc probe start
[ 4.260000] pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
[ 4.270000] mc13892 rtc probe succeed
[ 4.280000] i2c /dev entries driver
[ 4.290000] usb 1-1: new high speed USB device using fsl-ehci and address 2
[ 4.300000] MXC WatchDog Driver 2.0
[ 4.310000] clk: Unable to get requested clock: wdog_clk
[ 4.320000] MXC Watchdog # 0 Timer: initial timeout 60 sec
[ 4.330000] cpuidle: using governor ladder
[ 4.340000] cpuidle: using governor menu
[ 4.450000] usb 1-1: configuration #1 chosen from 1 choice
[ 4.460000] hub 1-1:1.0: USB hub found
[ 4.470000] hub 1-1:1.0: 4 ports detected
[ 4.600000] usb 2-1: new high speed USB device using fsl-ehci and address 2
[ 4.610000] VPU initialized
[ 4.620000] mxsdhci: MXC Secure Digital Host Controller Interface driver
[ 4.630000] mxsdhci: MXC SDHCI Controller Driver.
[ 4.640000] mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
[ 4.650000] mxsdhci: MXC SDHCI Controller Driver.
[ 4.660000] mmc1: SDHCI detect irq 136 irq 2 INTERNAL DMA
[ 4.670000] Registered led device: efikamx:green:power
[ 4.780000] Registered led device: efikamx:red:ide
[ 4.790000] Registered led device: efikamx:blue:sdhc
[ 4.820000] usbcore: registered new interface driver usbhid
[ 4.830000] usbhid: v2.6:USB HID core driver
[ 4.940000] usb 2-1: configuration #1 chosen from 1 choice
[ 4.950000] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 7.160000] sgtl5000-i2c 1-000a: SGTL5000 revision 17
[ 7.190000] No device for DAI imx-ssi-1-0
[ 7.200000] No device for DAI imx-ssi-1-1
[ 7.210000] No device for DAI imx-ssi-2-0
[ 7.210000] No device for DAI imx-ssi-2-1
[ 7.220000] DMA Sound Buffers Allocated:UseIram=1 buf->addr=1fff3000 buf->area=de8a8000 size=24576
[ 7.240000] DMA Sound Buffers Allocated:UseIram=1 buf->addr=ac270000 buf->area=fbe6d000 size=24576
[ 7.250000] asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
[ 7.310000] ALSA device list:
[ 7.310000] #0: imx-3stack (SGTL5000)
[ 7.320000] TCP cubic registered
[ 7.330000] NET: Registered protocol family 17
[ 7.340000] ThumbEE CPU extension supported.
[ 7.350000] input: Genesi Efika MX Buttons as /devices/virtual/input/input0
[ 7.360000] usb 1-1.1: new high speed USB device using fsl-ehci and address 3
[ 7.380000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 7.390000] regulator_init_complete: incomplete constraints, leaving GPO4 on
[ 7.400000] regulator_init_complete: incomplete constraints, leaving GPO3 on
[ 7.420000] regulator_init_complete: incomplete constraints, leaving GPO2 on
[ 7.430000] regulator_init_complete: incomplete constraints, leaving GPO1 on
[ 7.440000] regulator_init_complete: incomplete constraints, leaving VUSB on
[ 7.450000] regulator_init_complete: incomplete constraints, leaving VGEN3 on
[ 7.460000] regulator_init_complete: incomplete constraints, leaving VGEN2 on
[ 7.480000] regulator_init_complete: incomplete constraints, leaving VGEN1 on
[ 7.490000] regulator_init_complete: incomplete constraints, leaving VCAM on
[ 7.500000] regulator_init_complete: incomplete constraints, leaving VAUDIO on
[ 7.510000] regulator_init_complete: incomplete constraints, leaving VUSB2 on
[ 7.520000] regulator_init_complete: incomplete constraints, leaving VSD on
[ 7.530000] regulator_init_complete: incomplete constraints, leaving VPLL on
[ 7.540000] regulator_init_complete: incomplete constraints, leaving VIOHI on
[ 7.560000] regulator_init_complete: incomplete constraints, leaving SWBST on
[ 7.580000] pmic_rtc pmic_rtc.1: setting system clock to 2010-01-17 00:06:34 UTC (1263686794)
[ 7.590000] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240).
[ 7.600000] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240).
[ 7.620000] EXT4-fs (sda2): barriers enabled
[ 7.650000] kjournald2 starting: pid 1014, dev sda2:8, commit interval 5 seconds
[ 7.660000] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 7.680000] EXT4-fs (sda2): internal journal on sda2:8
[ 7.690000] EXT4-fs (sda2): delayed allocation enabled
[ 7.700000] EXT4-fs: file extents enabled
[ 7.710000] EXT4-fs: mballoc enabled
[ 7.720000] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 7.730000] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 7.740000] Freeing init memory: 108K
[ 7.760000] usb 1-1.1: configuration #1 chosen from 1 choice
[ 12.160000] Error: Driver 'rt2870' is already registered, aborting...
[ 12.170000] usbcore: error -16 registering interface driver rt2870
[ 13.760000] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 14.080000] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Ubuntu 9.10 efikamx ttymxc0

efikamx login:
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 4
  [ 51 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group