Hello, i'm trying to build a custom environment case for my project, and would need to know the distance between fixing holes and sizes.
If someone has got their board please check it.

looking at the board with the PCI slot on the "bottom" and the ATX connector on the "top", I measure the following:

bottom-left hole is 10mm from the "left" and 6mm from the "bottom"

bottom-right hole is 10mm from the "right" and 6mm from the "bottom"

top-right hole is 10mm from the "right" and 8mm from the "top"

top-left hole is 33mm from the "left" and 8mm from the "top"
________
Buy vapir vaporizer

Thanks for the reply, i'm back to work again ;)