All times are UTC-06:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Feb 07, 2013 3:25 pm 
Offline

Joined: Mon May 09, 2011 7:18 pm
Posts: 3
Location: New Hampshire
I've recently installed Bodhi Linux on my Efika Smartbook, and I'm running into behavior that may be a hardware problem. I'd welcome any insight readers of this forum might have. (I've also posted my issue on the Bodhi Linux forum.)

My Smartbook successfully boots into Bodhi Linux when the micro-SD slot is empty, but if a card is present, the boot fails. By "fail" I mean that all I see is that the led to the left of the keyboard flashes three times and then goes solid, nothing appears on the screen, and the green light that signals disk activity never comes on.

This is new behavior: I did successfully boot up with the micro-SD card installed at least once, probably more than once (I can't recall).

A little more history: Yesterday I was running normally with the micro-SD card present, doing some work (with Synaptic) that shouldn't have involved accessing that file system at all, when the system suddenly hung up. I powered down and tried to boot up, without success. (I didn't try rebooting without the micro-SD card at that point.) I removed the micro-SD and completely reinstalled Bodhi Linux. It booted up fine (without the micro-SD) and I proceeded to configure the system again. I next tried to install the micro-SD card: I powered down the system, inserted the card, and rebooted. Failure. I removed the card and attempted to boot again. This time it worked. I put the micro-SD card into the adapter and inserted it into the other SD slot. No problem. I could access the data on the card satisfactorily (and backed it up to the SSD).

I haven't yet reformatted the micro-SD card to see if that makes a difference, but, as I said, when it's accessed through the normal SD slot there doesn't appear to be a problem, and so I'm guessing the card itself is okay.

I'm a relative newbie, so it may be that I've failed to consider something really obvious. But it looks to me like something fundamental is broken, perhaps a hardware failure.

Mike


Top
   
PostPosted: Mon Feb 11, 2013 7:42 am 
Offline

Joined: Wed Jul 01, 2009 4:35 pm
Posts: 94
Location: Italy
In my experience with Efika Mx Smartbook with Debian unstable (7.0) http://library.powerdeveloper.net/index.php/Debian
or with Ubuntu distributed with Efika Mx
http://library.powerdeveloper.net/index.php/Ubuntu

I have see that micro-sd frequently give kernel errors on boot, like yours.
So is not a problem of Bodhi Linux but is something related to the kernel , could be even some hardware limit.

Quote:
I've recently installed Bodhi Linux on my Efika Smartbook, and I'm running into behavior that may be a hardware problem. I'd welcome any insight readers of this forum might have. (I've also posted my issue on the Bodhi Linux forum.)

My Smartbook successfully boots into Bodhi Linux when the micro-SD slot is empty, but if a card is present, the boot fails. By "fail" I mean that all I see is that the led to the left of the keyboard flashes three times and then goes solid, nothing appears on the screen, and the green light that signals disk activity never comes on.

This is new behavior: I did successfully boot up with the micro-SD card installed at least once, probably more than once (I can't recall).

A little more history: Yesterday I was running normally with the micro-SD card present, doing some work (with Synaptic) that shouldn't have involved accessing that file system at all, when the system suddenly hung up. I powered down and tried to boot up, without success. (I didn't try rebooting without the micro-SD card at that point.) I removed the micro-SD and completely reinstalled Bodhi Linux. It booted up fine (without the micro-SD) and I proceeded to configure the system again. I next tried to install the micro-SD card: I powered down the system, inserted the card, and rebooted. Failure. I removed the card and attempted to boot again. This time it worked. I put the micro-SD card into the adapter and inserted it into the other SD slot. No problem. I could access the data on the card satisfactorily (and backed it up to the SSD).

I haven't yet reformatted the micro-SD card to see if that makes a difference, but, as I said, when it's accessed through the normal SD slot there doesn't appear to be a problem, and so I'm guessing the card itself is okay.

I'm a relative newbie, so it may be that I've failed to consider something really obvious. But it looks to me like something fundamental is broken, perhaps a hardware failure.

Mike

_________________
http://deliriotecnologico.blogspot.com


Top
   
PostPosted: Mon Feb 18, 2013 12:24 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
There are two obvious reasons why this might happen;

[*] that there is a valid boot.scr file in partition 1 on the uSD (back) card, in which case U-Boot will prefer this instead of the one on PATA or the SDHC (left) slot.

[*] your uSD (or large SD) card is starting to get old and drawing too much power. Both SD card slots are on the same 3.15V rail and sometimes more current is drawn with two SD cards inserted. You can't change (reasonably) or bump the voltage from this value since it is a required boot supply.

I would wager that it's the first one, but in the end the supply problem with the SD card slots is simply a hardware bug you simply can't work around except to find a better combination of SD cards.

_________________
Matt Sealey


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group