Unanswered topics | Active topics


Board index » »

All times are UTC-06:00



Post new topic  Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
HaPe
 Post subject: Efika MX black Screen
PostPosted: Sat Oct 22, 2011 1:39 am 
Offline

Joined: Fri Oct 21, 2011 12:49 am
Posts: 3
Hi,

i try to bring up the Smarttop with a 19" TV but the Screen show me a flashing Label "no signal". This is the Situation with the newest kernel from October. The TV is this Type: http://www.ijoy-europe.com/es/LEDSP19.html

Hier is the dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.31.14.26-efikamx (neko@shinji) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.5-15ubuntu1) ) #22 Wed Sep 21 09:32:09 CDT 2011
[ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Genesi Efika MX (Smarttop)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 118784
[ 0.000000] free_area_init_node: node 0, pgdat 804604c4, node_mem_map 804c7000
[ 0.000000] DMA zone: 192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 24384 pages, LIFO batch:3
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93472 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117856
[ 0.000000] Kernel command line: console=tty1 root=/dev/sda2 rootwait rw quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 464MB = 464MB total
[ 0.000000] Memory: 459208KB available (3808K code, 602K data, 144K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:368
[ 0.000000] MXC IRQ initialized
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] Initializing cgroup subsys net_cls
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] i.MX IRAM pool: 128 KB@0x9d840000
[ 0.000000] IRAM READY
[ 0.000000] CPU is i.MX51 Revision 3.0
[ 0.000000] MXC GPIO hardware
[ 0.000000] Efika MX: mmc0 configured as external SDHC
[ 0.000000] Efika MX: Smarttop Revision 1.3
[ 0.000000] Using SDMA I.API
[ 0.000000] MXC DMA API initialized
[ 0.000000] bio: create slab <bio-0> at 0
[ 0.000000] SCSI subsystem initialized
[ 0.000000] libata version 3.00 loaded.
[ 0.000000] CSPI: mxc_spi-0 probed
[ 0.000000] IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.000000] NET: Registered protocol family 8
[ 0.000000] NET: Registered protocol family 20
[ 0.000000] mc13892 Rev 2.0 FinVer 2 detected
[ 0.000000] Initializing regulators for Efika MX
[ 0.000000] regulator: SW1: 600 <--> 1375 mV
[ 0.000000] regulator: SW2: 900 <--> 1850 mV
[ 0.000000] regulator: SW3: 1100 <--> 1850 mV
[ 0.000000] regulator: SW4: 1100 <--> 1850 mV
[ 0.000000] regulator: SWBST: 0 mV
[ 0.000000] regulator: VIOHI: 0 mV
[ 0.000000] regulator: VPLL: 1050 <--> 1800 mV
[ 0.000000] regulator: VDIG: 1650 mV
[ 0.000000] regulator: VSD: 1800 <--> 3150 mV
[ 0.000000] regulator: VUSB2: 2400 <--> 2775 mV
[ 0.000000] regulator: VVIDEO: 2775 mV
[ 0.000000] regulator: VAUDIO: 2300 <--> 3000 mV
[ 0.000000] regulator: VCAM: 2500 <--> 3000 mV fast normal
[ 0.000000] regulator: VGEN1: 1200 <--> 3150 mV
[ 0.000000] regulator: VGEN2: 1200 <--> 3150 mV
[ 0.000000] regulator: VGEN3: 1800 <--> 2900 mV
[ 0.000000] regulator: VUSB: 0 mV
[ 0.000000] regulator: GPO1: 0 mV
[ 0.000000] regulator: GPO2: 0 mV
[ 0.000000] regulator: GPO3: 0 mV
[ 0.000000] regulator: GPO4: 0 mV
[ 0.000000] Device spi1.0 probed
[ 1.106941] Switched to high resolution mode on CPU 0
[ 1.108483] NET: Registered protocol family 2
[ 1.108821] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.109818] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.110373] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 1.110654] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.110666] TCP reno registered
[ 1.110864] NET: Registered protocol family 1
[ 1.111061] Unpacking initramfs...
[ 1.519343] Freeing initrd memory: 6364K
[ 1.520114] LPMode driver module loaded
[ 1.520127] Static Power Management for Freescale i.MX51
[ 1.520402] PM driver module loaded
[ 1.520636] sdram autogating driver module loaded
[ 1.520946] Bus freq driver module loaded
[ 1.520989] mxc_dvfs_core_probe
[ 1.521258] DVFS driver module loaded
[ 1.521277] i.MXC CPU frequency driver
[ 1.521688] DVFS PER driver module loaded
[ 1.523328] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.523367] msgmni has been set to 909
[ 1.524697] alg: No test for stdrng (krng)
[ 1.524989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.525006] io scheduler noop registered (default)
[ 1.525035] io scheduler cfq registered
[ 1.526696] mxc_ipu mxc_ipu: Channel already disabled 9
[ 1.526709] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 1.540417] Console: switching to colour frame buffer device 80x30
[ 2.167813] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 2.170621] SIIHDMI: hotplug: display attached, powered on
[ 2.216957] SIIHDMI: 15 modes parsed from CEA video data block
[ 2.216970] SIIHDMI: HDMI VSDB detected (basic audio supported)
[ 2.216981] SIIHDMI: HDMI port configuration: 2.0.0.0
[ 2.216992] SIIHDMI: Unsupported modelines:
[ 2.217012] SIIHDMI: C "1440x576@50i" 13.500 1440 1464 1590 1728 576 586 592 631 -hsync -vsync (interlaced)
[ 2.217039] SIIHDMI: C "720x576@50" 27.00 720 732 796 864 576 586 591 630 -hsync -vsync (detailed match present)
[ 2.217065] SIIHDMI: C "1280x720@50" 74.250 1280 1720 1760 1980 720 730 735 755 +hsync -vsync (detailed match present)
[ 2.217090] SIIHDMI: C "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 2.217115] SIIHDMI: C "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 2.217141] SIIHDMI: C "1440x480@60i" 13.500 1440 1478 1602 1716 480 494 500 531 -hsync -vsync (interlaced)
[ 2.217167] SIIHDMI: C "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 2.217191] SIIHDMI: C "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 2.217218] SIIHDMI: "1920x1080@100i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync (interlaced)
[ 2.217244] SIIHDMI: "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (insufficient margin)
[ 2.217269] SIIHDMI: "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync (insufficient margin)
[ 2.217294] SIIHDMI: "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (insufficient margin)
[ 2.217318] SIIHDMI: "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync (insufficient margin)
[ 2.217343] SIIHDMI: C "640x480@60" 25.175 640 656 752 800 480 492 494 527 -hsync -vsync (IT match present)
[ 2.217366] SIIHDMI: "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync (insufficient margin)
[ 2.217383] SIIHDMI: discarded 15 incompatible modes
[ 2.217391] SIIHDMI: supported modelines:
[ 2.217407] SIIHDMI: C "720x480@60" 27.00 720 736 798 858 480 495 501 531 -hsync -vsync
[ 2.217428] SIIHDMI: C "1280x720@60" 74.250 1280 1390 1430 1650 720 730 735 755 +hsync -vsync
[ 2.217449] SIIHDMI: "720x576@50" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync
[ 2.217470] SIIHDMI: "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 2.217490] SIIHDMI: "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 2.217512] SIIHDMI: "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 2.217533] SIIHDMI: "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 2.217554] SIIHDMI: "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
[ 2.217575] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 2.217592] SIIHDMI: selected configuration:
[ 2.217609] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 2.386957] IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 2.425921] Serial: MXC Internal UART driver
[ 2.426105] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
[ 2.431411] loop: module loaded
[ 2.432593] pata_fsl pata_fsl: rchan=29 wchan=28
[ 2.432745] scsi0 : pata_fsl
[ 2.433267] ata1: PATA max UDMA/44 irq 70
[ 2.434681] mice: PS/2 mouse device common for all mice
[ 2.434775] mc13892 rtc probe start
[ 2.447536] pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
[ 2.447551] mc13892 rtc probe succeed
[ 2.447713] i2c /dev entries driver
[ 2.448283] Linux video capture interface: v2.00
[ 2.448801] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
[ 2.448998] MXC WatchDog Driver 2.0
[ 2.449117] clk: Unable to get requested clock: wdog_clk
[ 2.449389] MXC Watchdog # 0 Timer: initial timeout 60 sec
[ 2.449634] cpuidle: using governor ladder
[ 2.449646] cpuidle: using governor menu
[ 2.450061] PMIC Character device: successfully loaded
[ 2.450624] VPU initialized
[ 2.450970] mxsdhci: MXC Secure Digital Host Controller Interface driver
[ 2.451028] mxsdhci: MXC SDHCI Controller Driver.
[ 2.451500] mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
[ 2.452202] Registered led device: efikamx:green
[ 2.452580] Registered led device: efikamx:red
[ 2.452951] Registered led device: efikamx:blue
[ 2.454033] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 2.459033] ALSA device list:
[ 2.459048] No soundcards found.
[ 2.460269] TCP cubic registered
[ 2.460283] NET: Registered protocol family 17
[ 2.460365] ThumbEE CPU extension supported.
[ 2.461400] input: Efika MX Input as /devices/virtual/input/input0
[ 2.461883] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 2.462950] regulator_init_complete: incomplete constraints, leaving GPO4 on
[ 2.462965] regulator_init_complete: incomplete constraints, leaving GPO3 on
[ 2.462978] regulator_init_complete: incomplete constraints, leaving GPO2 on
[ 2.462990] regulator_init_complete: incomplete constraints, leaving GPO1 on
[ 2.463004] regulator_init_complete: incomplete constraints, leaving VGEN1 on
[ 2.463016] regulator_init_complete: incomplete constraints, leaving VCAM on
[ 2.463028] regulator_init_complete: incomplete constraints, leaving VAUDIO on
[ 2.463042] regulator_init_complete: incomplete constraints, leaving VSD on
[ 2.463053] regulator_init_complete: incomplete constraints, leaving VDIG on
[ 2.463067] regulator_init_complete: incomplete constraints, leaving SWBST on
[ 2.520261] pmic_rtc pmic_rtc.1: setting system clock to 2011-10-22 06:29:02 UTC (1319264942)
[ 2.611190] ata1.00: ATA-8: SanDisk pSSD-P2 8GB, SSD 5.20, max UDMA/133
[ 2.611206] ata1.00: 15649200 sectors, multi 0: LBA48
[ 2.653026] ata1.00: configured for UDMA/44
[ 2.653411] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-P2 SSD PQ: 0 ANSI: 5
[ 2.654558] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2.654772] sd 0:0:0:0: [sda] Write Protect is off
[ 2.654787] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.654892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.655489] sda: sda1 sda2
[ 2.656998] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.658428] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.658487] Freeing init memory: 144K
[ 2.658495] BFS CPU scheduler v0.376 by Con Kolivas.
[ 2.759887] udev[516]: starting version 163
[ 4.217434] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.471163] EXT4-fs (sda2): barriers enabled
[ 4.485552] kjournald2 starting: pid 655, dev sda2:8, commit interval 5 seconds
[ 4.485669] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 4.487950] EXT4-fs (sda2): internal journal on sda2:8
[ 4.487969] EXT4-fs (sda2): delayed allocation enabled
[ 4.487982] EXT4-fs: file extents enabled
[ 4.490154] EXT4-fs: mballoc enabled
[ 4.490226] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 7.569617] udev[721]: starting version 163
[ 8.047249] usbcore: registered new interface driver usbfs
[ 8.047331] usbcore: registered new interface driver hub
[ 8.113256] usbcore: registered new device driver usb
[ 8.126760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.249425] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 8.249494] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 8.277072] fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000
[ 8.297070] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 8.297668] usb usb1: configuration #1 chosen from 1 choice
[ 8.297844] hub 1-0:1.0: USB hub found
[ 8.297925] hub 1-0:1.0: 1 port detected
[ 8.368437] m25p80 spi1.1: sst25vf032b (4096 Kbytes)
[ 8.368455] Creating 3 MTD partitions on "spi_nor_flash":
[ 8.368474] 0x000000000000-0x000000040000 : "u-boot"
[ 8.368918] 0x000000040000-0x000000050000 : "config"
[ 8.369187] 0x000000050000-0x000000400000 : "spare"
[ 8.392717] sgtl5000-i2c 1-000a: SGTL5000 revision 17
[ 8.520016] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 8.520065] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 8.520422] usb 1-1: new high speed USB device using fsl-ehci and address 2
[ 8.547050] fsl-ehci fsl-ehci.1: irq 14, io base 0x73f80200
[ 8.657045] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 8.657628] usb usb2: configuration #1 chosen from 1 choice
[ 8.659752] hub 2-0:1.0: USB hub found
[ 8.659838] hub 2-0:1.0: 1 port detected
[ 8.676319] MXC spdif support initialized
[ 8.940300] kgsl_hal_init: hal->z430_regspace.mmio_phys_base = 0x30000000
[ 8.940320] kgsl_hal_init: hal->z430_regspace.mmio_virt_base = 0x9da00000
[ 8.940333] kgsl_hal_init: hal->z430_regspace.sizebytes = 0x00020000
[ 8.940357] kgsl_hal_init: hal->z160_regspace.mmio_phys_base = 0xd0000000
[ 8.940369] kgsl_hal_init: hal->z160_regspace.mmio_virt_base = 0x9d9f8000
[ 8.940380] kgsl_hal_init: hal->z160_regspace.sizebytes = 0x00001000
[ 8.940390] GPU MMU enabled
[ 9.020829] Reserved memory: pa = 0xae000000 va = 0xa0000000 size = 0x02000000
[ 9.020843] GSL_HAL_MEM2 aperture (PHYS) pa = 0xae000000 va = 0xa0000000 size = 0x02000000
[ 9.020859] GSL_HAL_MEM1 aperture (MMU) pa = 0x00100000 va = 0x00100000 size = 0x08000000
[ 9.177537] usb 1-1: configuration #1 chosen from 1 choice
[ 9.299556] usb 2-1: new high speed USB device using fsl-ehci and address 2
[ 9.451053] No device for DAI imx-ssi-2-0
[ 9.451075] No device for DAI imx-ssi-2-1
[ 9.463334] DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffe2000 buf->area=9d842000 size=24576
[ 9.463470] DMA Sound Buffers Allocated:UseIram=1 buf->addr=a8678000 buf->area=f9e0a000 size=24576
[ 9.463485] asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
[ 9.567510] usb 2-1: configuration #1 chosen from 1 choice
[ 9.568338] hub 2-1:1.0: USB hub found
[ 9.568494] hub 2-1:1.0: 4 ports detected
[ 9.897370] usb 2-1.1: new high speed USB device using fsl-ehci and address 3
[ 10.118138] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.122188] ramzswap: num_devices not specified. Using default: 1
[ 10.123644] ramzswap: /dev/ramzswap0 initialized: disksize_kb=131072
[ 10.632366] usb 2-1.1: configuration #1 chosen from 1 choice
[ 10.817541] usb 2-1.3: new high speed USB device using fsl-ehci and address 4
[ 11.044152] usb 2-1.3: configuration #1 chosen from 1 choice
[ 11.047925] hub 2-1.3:1.0: USB hub found
[ 11.048661] hub 2-1.3:1.0: 4 ports detected
[ 11.066426] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.083364] rtusb init --->
[ 11.197991] usbcore: registered new interface driver rt2870
[ 11.453794] kjournald starting. Commit interval 15 seconds
[ 11.467883] usb 2-1.3.2: new low speed USB device using fsl-ehci and address 5
[ 11.487235] EXT3 FS on sda1, internal journal
[ 11.487646] EXT3-fs: mounted filesystem with writeback data mode.
[ 11.848702] eth0: register 'asix' at usb-fsl-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:56:1b:9c
[ 11.848853] usbcore: registered new interface driver asix
[ 11.940914] usb 2-1.3.2: configuration #1 chosen from 1 choice
[ 12.208938] usb 2-1.3.3: new full speed USB device using fsl-ehci and address 6
[ 12.355928] input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/input/input1
[ 12.356776] generic-usb 0003:04D9:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-fsl-ehci.1-1.3.2/input0
[ 12.422236] usb 2-1.3.3: configuration #1 chosen from 1 choice
[ 12.433592] Adding 131064k swap on /dev/ramzswap0. Priority:0 extents:1 across:131064k SS
[ 12.548915] input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/input/input2
[ 12.549658] generic-usb 0003:04D9:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-fsl-ehci.1-1.3.2/input1
[ 12.557933] input: Logitech USB Receiver as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/input/input3
[ 12.558355] generic-usb 0003:046D:C52F.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fsl-ehci.1-1.3.3/input0
[ 12.637315] input: Logitech USB Receiver as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.1/input/input4
[ 12.637983] generic-usb 0003:046D:C52F.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-fsl-ehci.1-1.3.3/input1
[ 12.638082] usbcore: registered new interface driver usbhid
[ 12.638097] usbhid: v2.6:USB HID core driver
[ 13.467852] NET: Registered protocol family 10
[ 13.469398] lo: Disabled Privacy Extensions
[ 16.174761] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.319246] usb 2-1.1: firmware: requesting rt3070.bin
[ 18.391482] eth0: kevent 4 may have been dropped
[ 18.903447] eth0: kevent 4 may have been dropped
[ 19.512355] 0x1300 = 00073200
[ 19.515010] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 19.646981] DMFC high resolution has set, will not change
[ 19.737285] Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
[ 20.139850] mxc_ipu mxc_ipu: Channel already disabled 9
[ 20.139866] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 20.196827] DMFC high resolution has set, will not change
[ 23.815398] 0x1300 = 00073200
[ 26.856966] eth0: no IPv6 routers present
[ 34.796977] wlan0: no IPv6 routers present
the edid
Code:
00000000 00 ff ff ff ff ff ff 00 0e d4 03 00 00 00 00 00 |................|
00000010 10 14 01 03 80 64 3d 00 8a ee 95 a3 54 4c 99 26 |.....d=.....TL.&|
00000020 0f 50 54 a5 4e 00 01 01 01 01 01 01 01 01 01 01 |.PT.N...........|
00000030 01 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70 |......f!P.Q..0@p|
00000040 36 00 3f 43 21 00 00 1e 00 00 00 fd 00 18 55 0f |6.?C!.........U.|
00000050 50 10 00 0a 20 20 20 20 20 20 00 00 00 fc 00 43 |P... .....C|
00000060 56 54 45 20 54 56 0a 20 20 20 20 20 00 00 00 00 |VTE TV. ....|
00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 |................|
00000080 02 03 23 74 4f 90 05 04 03 07 02 06 01 1f 14 13 |..#tO...........|
00000090 12 16 11 15 23 09 07 03 83 01 00 00 66 03 0c 00 |....#.......f...|
000000a0 20 00 80 01 1d 00 bc 52 d0 1e 20 b8 28 55 40 c4 | ......R.. .(U@.|
000000b0 8e 21 00 00 1e 01 1d 80 d0 72 1c 16 20 10 2c 25 |.!.......r.. .,%|
000000c0 80 c4 8e 21 00 00 9e 8c 0a d0 8a 20 e0 2d 10 10 |...!....... .-..|
000000d0 3e 96 00 13 8e 21 00 00 18 8c 0a d0 90 20 40 31 |>....!....... @1|
000000e0 20 0c 40 55 00 13 8e 21 00 00 18 00 00 00 00 00 | .@U...!........|
000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 95 |................|
00000100
the /var/log/Xorg.0.log
Code:
[ 19.548]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 19.548] X Protocol Version 11, Revision 0
[ 19.548] Build Operating System: Linux 2.6.31-608-imx51 armv7l Ubuntu
[ 19.548] Current Operating System: Linux efika 2.6.31.14.26-efikamx #22 Wed Sep 21 09:32:09 CDT 2011 armv7l
[ 19.548] Kernel command line: console=tty1 root=/dev/sda2 rootwait rw quiet splash
[ 19.548] Build Date: 09 January 2011 12:21:28PM
[ 19.548] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
[ 19.549] Current version of pixman: 0.23.3
[ 19.549] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.549] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.549] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 22 08:29:19 2011
[ 19.552] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.553] (==) No Layout section. Using the first Screen section.
[ 19.553] (==) No screen section available. Using defaults.
[ 19.554] (**) |-->Screen "Default Screen Section" (0)
[ 19.554] (**) | |-->Monitor "<default monitor>"
[ 19.555] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.555] (==) Automatically adding devices
[ 19.555] (==) Automatically enabling devices
[ 19.555] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.555] Entry deleted from font path.
[ 19.556] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 19.556] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 19.556] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.556] (II) Loader magic: 0x15dd54
[ 19.556] (II) Module ABI versions:
[ 19.556] X.Org ANSI C Emulation: 0.4
[ 19.556] X.Org Video Driver: 8.0
[ 19.556] X.Org XInput driver : 11.0
[ 19.556] X.Org Server Extension : 4.0
[ 19.556] (II) LoadModule: "extmod"
[ 19.561] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.562] (II) Module extmod: vendor="X.Org Foundation"
[ 19.562] compiled for 1.9.0, module version = 1.0.0
[ 19.562] Module class: X.Org Server Extension
[ 19.562] ABI class: X.Org Server Extension, version 4.0
[ 19.562] (II) Loading extension MIT-SCREEN-SAVER
[ 19.562] (II) Loading extension XFree86-VidModeExtension
[ 19.562] (II) Loading extension XFree86-DGA
[ 19.562] (II) Loading extension DPMS
[ 19.562] (II) Loading extension XVideo
[ 19.562] (II) Loading extension XVideo-MotionCompensation
[ 19.563] (II) Loading extension X-Resource
[ 19.563] (II) LoadModule: "dbe"
[ 19.564] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.564] (II) Module dbe: vendor="X.Org Foundation"
[ 19.564] compiled for 1.9.0, module version = 1.0.0
[ 19.564] Module class: X.Org Server Extension
[ 19.564] ABI class: X.Org Server Extension, version 4.0
[ 19.565] (II) Loading extension DOUBLE-BUFFER
[ 19.565] (II) LoadModule: "glx"
[ 19.565] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.566] (II) Module glx: vendor="X.Org Foundation"
[ 19.566] compiled for 1.9.0, module version = 1.0.0
[ 19.566] ABI class: X.Org Server Extension, version 4.0
[ 19.567] (==) AIGLX enabled
[ 19.567] (II) Loading extension GLX
[ 19.567] (II) LoadModule: "record"
[ 19.568] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.568] (II) Module record: vendor="X.Org Foundation"
[ 19.568] compiled for 1.9.0, module version = 1.13.0
[ 19.568] Module class: X.Org Server Extension
[ 19.569] ABI class: X.Org Server Extension, version 4.0
[ 19.569] (II) Loading extension RECORD
[ 19.569] (II) LoadModule: "dri"
[ 19.570] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.571] (II) Module dri: vendor="X.Org Foundation"
[ 19.571] compiled for 1.9.0, module version = 1.0.0
[ 19.571] ABI class: X.Org Server Extension, version 4.0
[ 19.571] (II) Loading extension XFree86-DRI
[ 19.571] (II) LoadModule: "dri2"
[ 19.572] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.573] (II) Module dri2: vendor="X.Org Foundation"
[ 19.573] compiled for 1.9.0, module version = 1.2.0
[ 19.573] ABI class: X.Org Server Extension, version 4.0
[ 19.573] (II) Loading extension DRI2
[ 19.573] Primary device is not PCI
[ 19.573] (II) LoadModule: "imx"
[ 19.575] (II) Loading /usr/lib/xorg/modules/drivers/imx_drv.so
[ 19.575] (II) Module imx: vendor="X.Org Foundation"
[ 19.576] compiled for 1.9.0, module version = 0.2.0
[ 19.576] ABI class: X.Org Video Driver, version 8.0
[ 19.576] (==) Matched imx as autoconfigured driver 0
[ 19.576] (==) Assigned the driver to the xf86ConfigLayout
[ 19.576] (II) LoadModule: "imx"
[ 19.577] (II) Reloading /usr/lib/xorg/modules/drivers/imx_drv.so
[ 19.577] (II) UnloadModule: "imx"
[ 19.577] (II) Failed to load module "imx" (already loaded, 9)
[ 19.577] (II) IMX: driver for framebuffer: imx
[ 19.578] (++) using VT number 7

[ 19.578] (WW) Falling back to old probe method for imx
[ 19.578] (II) Loading sub module "fbdevhw"
[ 19.578] (II) LoadModule: "fbdevhw"
[ 19.579] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19.580] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.580] compiled for 1.9.0, module version = 0.0.2
[ 19.580] ABI class: X.Org Video Driver, version 8.0
[ 19.580] (II) IMX(0): using default device
[ 19.581] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 19.581] (II) IMX(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 19.581] (==) IMX(0): Depth 16, (==) framebuffer bpp 16
[ 19.581] (==) IMX(0): RGB weight 565
[ 19.581] (==) IMX(0): Default visual is TrueColor
[ 19.581] (==) IMX(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.581] (II) IMX(0): hardware: DISP3 BG (video memory: 16384kB)
[ 19.584] (II) IMX(0): checking modes against framebuffer device...
[ 19.584] (II) IMX(0): checking modes against monitor...
[ 19.584] (--) IMX(0): Virtual size is 1360x768 (pitch 1360)
[ 19.585] (**) IMX(0): Built-in mode "current": 85.5 MHz, 47.7 kHz, 60.0 Hz
[ 19.585] (II) IMX(0): Modeline "current"x0.0 85.51 1360 1424 1536 1792 768 771 777 795 +hsync +vsync -csync (47.7 kHz)
[ 19.585] (==) IMX(0): DPI set to (96, 96)
[ 19.585] (II) Loading sub module "fb"
[ 19.585] (II) LoadModule: "fb"
[ 19.586] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.587] (II) Module fb: vendor="X.Org Foundation"
[ 19.587] compiled for 1.9.0, module version = 1.0.0
[ 19.587] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.587] (II) Loading sub module "exa"
[ 19.587] (II) LoadModule: "exa"
[ 19.588] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 19.589] (II) Module exa: vendor="X.Org Foundation"
[ 19.589] compiled for 1.9.0, module version = 2.5.0
[ 19.589] ABI class: X.Org Video Driver, version 8.0
[ 19.653] (II) IMX(0): Pitch updated to 1376 after ModeInit
[ 19.653] (II) IMX(0): physAddr=0xad000000 fbstart=0x2afe4000 fbmem=0x2afe4000 fboff=0x00000000
[ 19.654] (II) IMX(0): framebuffer: size=1360x768 bits=16 screenbytes=2113536 stride=2752
[ 19.654] (II) IMX(0): rgbOffset=11,5,0 rgbMask=0x0000f800,0x000007e0,0x0000001f
[ 19.654] (II) EXA(0): Driver allocated offscreen pixmaps
[ 19.654] (II) EXA(0): Driver registered support for the following operations:
[ 19.654] (II) Solid
[ 19.654] (II) Copy
[ 19.654] (II) Composite (RENDER acceleration)
[ 19.654] (II) UploadToScreen
[ 19.654] (II) DownloadFromScreen
[ 19.711] (II) IMX(0): Using Z160 backend
[ 19.713] (II) IMX(0): IMX EXA acceleration setup successful
[ 19.714] (==) IMX(0): Backing store disabled
[ 19.714] (==) IMX(0): DPMS enabled
[ 19.715] (==) RandR enabled
[ 19.715] (II) Initializing built-in extension Generic Event Extension
[ 19.715] (II) Initializing built-in extension SHAPE
[ 19.715] (II) Initializing built-in extension MIT-SHM
[ 19.715] (II) Initializing built-in extension XInputExtension
[ 19.715] (II) Initializing built-in extension XTEST
[ 19.715] (II) Initializing built-in extension BIG-REQUESTS
[ 19.715] (II) Initializing built-in extension SYNC
[ 19.715] (II) Initializing built-in extension XKEYBOARD
[ 19.715] (II) Initializing built-in extension XC-MISC
[ 19.715] (II) Initializing built-in extension SECURITY
[ 19.715] (II) Initializing built-in extension XINERAMA
[ 19.715] (II) Initializing built-in extension XFIXES
[ 19.716] (II) Initializing built-in extension RENDER
[ 19.716] (II) Initializing built-in extension RANDR
[ 19.716] (II) Initializing built-in extension COMPOSITE
[ 19.716] (II) Initializing built-in extension DAMAGE
[ 19.716] (II) Initializing built-in extension GESTURE
[ 19.767] (II) AIGLX: Screen 0 is not DRI2 capable
[ 19.767] (II) AIGLX: Screen 0 is not DRI capable
[ 19.788] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 19.788] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 19.973] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 20.011] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 20.011] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.012] (II) LoadModule: "evdev"
[ 20.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.014] (II) Module evdev: vendor="X.Org Foundation"
[ 20.014] compiled for 1.9.0, module version = 2.3.2
[ 20.014] Module class: X.Org XInput Driver
[ 20.014] ABI class: X.Org XInput driver, version 11.0
[ 20.015] (**) USB Keyboard: always reports core events
[ 20.015] (**) USB Keyboard: Device: "/dev/input/event1"
[ 20.015] (II) USB Keyboard: Found keys
[ 20.015] (II) USB Keyboard: Configuring as keyboard
[ 20.015] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD)
[ 20.015] (**) Option "xkb_rules" "evdev"
[ 20.015] (**) Option "xkb_model" "evdev"
[ 20.015] (**) Option "xkb_layout" "de"
[ 20.033] (II) XKB: reuse xkmfile /var/lib/xkb/server-1B5353734E7854C1F2B0553E65A16986C9AAC402.xkm
[ 20.037] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 20.038] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.038] (**) USB Keyboard: always reports core events
[ 20.038] (**) USB Keyboard: Device: "/dev/input/event2"
[ 20.038] (II) USB Keyboard: Found keys
[ 20.038] (II) USB Keyboard: Configuring as keyboard
[ 20.038] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD)
[ 20.038] (**) Option "xkb_rules" "evdev"
[ 20.039] (**) Option "xkb_model" "evdev"
[ 20.039] (**) Option "xkb_layout" "de"
[ 20.042] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 20.042] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 20.043] (**) Logitech USB Receiver: always reports core events
[ 20.043] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 20.043] (II) Logitech USB Receiver: Found 20 mouse buttons
[ 20.043] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 20.043] (II) Logitech USB Receiver: Found relative axes
[ 20.043] (II) Logitech USB Receiver: Found x and y relative axes
[ 20.043] (II) Logitech USB Receiver: Configuring as mouse
[ 20.044] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 20.044] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.044] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 20.044] (II) Logitech USB Receiver: initialized for relative axes.
[ 20.046] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 20.046] (II) No input driver/identifier specified (ignoring)
[ 20.048] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 20.048] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 20.048] (**) Logitech USB Receiver: always reports core events
[ 20.048] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[ 20.048] (II) Logitech USB Receiver: Found 1 mouse buttons
[ 20.048] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 20.048] (II) Logitech USB Receiver: Found relative axes
[ 20.048] (II) Logitech USB Receiver: Found absolute axes
[ 20.049] (II) evdev-grail: failed to open grail, no gesture support
[ 20.049] (II) Logitech USB Receiver: Found keys
[ 20.049] (II) Logitech USB Receiver: Configuring as mouse
[ 20.049] (II) Logitech USB Receiver: Configuring as keyboard
[ 20.049] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 20.049] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.049] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 20.050] (**) Option "xkb_rules" "evdev"
[ 20.050] (**) Option "xkb_model" "evdev"
[ 20.050] (**) Option "xkb_layout" "de"
[ 20.052] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 20.052] (II) Logitech USB Receiver: initialized for absolute axes.
[ 20.078] (II) config/udev: Adding input device Efika MX Input (/dev/input/event0)
[ 20.078] (**) Efika MX Input: Applying InputClass "evdev keyboard catchall"
[ 20.078] (**) Efika MX Input: always reports core events
[ 20.079] (**) Efika MX Input: Device: "/dev/input/event0"
[ 20.079] (II) Efika MX Input: Found keys
[ 20.079] (II) Efika MX Input: Configuring as keyboard
[ 20.079] (II) XINPUT: Adding extended input device "Efika MX Input" (type: KEYBOARD)
[ 20.079] (**) Option "xkb_rules" "evdev"
[ 20.079] (**) Option "xkb_model" "evdev"
[ 20.079] (**) Option "xkb_layout" "de"
I've already tried and tested a lots things. I would like also to mention briefly, partly because it brought a little success.

When tested with the kernel of March and May, I get an Image over the installing. But in a resolution of 1280x720 which brought a picture and devoured at the end of the installation, the toolbars on the desktop were hardly accessible.

With all of the following kernel versions I get a black screen over the installing.

The kernel of May, I then experimented with different boot parameters. And could then reach a appropriate resolution has been 1360x768 on the display.

However when I boot this kernel parameter to the latest carry on, nothing changes, the monitor remains black.

Also i tested the smarttop with the newest kernel on two other TV one is a 42 "Samsung and the other a 32" Sungoo. With both I get no decent picture.

The Samsung appears "unsupported format".

The Sungoo appears for a split second the desktop. Then the monitor switches to black. This is then repeated every second.

Even on my computer monitor I tested it. A Medion model. 20120, 23.6" HDMI connection. This is the only monitor with which I reach a satisfying result for me.

So, what should I do, to run the LED19 at a appropriate resolution. So i can get back to work and watch videos while I work? ;-)

Sorry for my bad (Google-)translated english. I hope you can understand it and of course you have a solution for me :-)
Top
   
Reply with quote  
bbrv
 Post subject:
PostPosted: Sat Oct 22, 2011 1:54 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Hi HaPe, we will look into this, but in the office we use the Smarttop on a 47" Samsung HD television every day. It works. We have also made presentations in companies and at hotels in South America and Europe on large screen displays from many different manufacturers, including Sony, SEMP Toshiba and Vizio. It can be a minute before the image appears and other times you see the Genesi logo and the timing dots right away. It is clear in your situation things are not working. |We will see what we can do.

Best regards,
R&B :)

_________________
http://bbrv.blogspot.com
Top
   
Reply with quote  
HaPe
 Post subject:
PostPosted: Sun Oct 23, 2011 10:16 pm 
Offline

Joined: Fri Oct 21, 2011 12:49 am
Posts: 3
Hi, thanks for your response.

After some more try & error i found a crazy solution, and i think this must be a bug.

The only way to bring up the EfikaMX with the i-Joy TV is this:
Code:
1. TV on
2. Smarttop on
- i see the jumping / flashing label "no signal"
3. log in smarttop over ssh
and wait is the Windowmanager up
- so far so good
4. now i switch off the TV
5. stop the gdm "service gdm stop"
6. switch on the TV
- wait for the Welcome logo from the TV
7. start gdm "service gdm start"
- the Desktop is there with the resolution 1360x768@62Hz DVI
just now i can restart the gdm, change the resolution over xorg.conf an so on and all works.

But if i switch the TV off then i must stop the gdm too, and start the gdm again with the welcome logo on the TV.

Other Problem is, as you can see above it is in DVI Mode instead of HDMI. But my TV has no DVI. Only HDMI and VGA. The Cable is a straight HDMI Cable. And of course i have no sound over HDMI.

I have this tested with the Version 2.6.31.14.26-efikamx and 2.6.31.14.24-efikamx.and the Installation was made with my medion monitor. The Bootparameter i have added was siihdmi.useitmodes=0 siihdmi.seventwenty=0. Without this oder in combination with other Bootparameter the Hack doesnt work.

Here the Logs from the last Start:
dmesg
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.31.14.26-efikamx (neko@shinji) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.5-15ubuntu1) ) #22 Wed Sep 21 09:32:09 CDT 2011
[ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Genesi Efika MX (Smarttop)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 118784
[ 0.000000] free_area_init_node: node 0, pgdat 804604c4, node_mem_map 804c7000
[ 0.000000] DMA zone: 192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 24384 pages, LIFO batch:3
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93472 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117856
[ 0.000000] Kernel command line: console=tty1 root=/dev/sda2 rootwait rw quiet splash siihdmi.useitmodes=0 siihdmi.seventwenty=0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 464MB = 464MB total
[ 0.000000] Memory: 459208KB available (3808K code, 602K data, 144K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:368
[ 0.000000] MXC IRQ initialized
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] Initializing cgroup subsys net_cls
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] i.MX IRAM pool: 128 KB@0x9d840000
[ 0.000000] IRAM READY
[ 0.000000] CPU is i.MX51 Revision 3.0
[ 0.000000] MXC GPIO hardware
[ 0.000000] Efika MX: mmc0 configured as external SDHC
[ 0.000000] Efika MX: Smarttop Revision 1.3
[ 0.000000] Using SDMA I.API
[ 0.000000] MXC DMA API initialized
[ 0.000000] bio: create slab <bio-0> at 0
[ 0.000000] SCSI subsystem initialized
[ 0.000000] libata version 3.00 loaded.
[ 0.000000] CSPI: mxc_spi-0 probed
[ 0.000000] IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.000000] NET: Registered protocol family 8
[ 0.000000] NET: Registered protocol family 20
[ 0.000000] mc13892 Rev 2.0 FinVer 2 detected
[ 0.000000] Initializing regulators for Efika MX
[ 0.000000] regulator: SW1: 600 <--> 1375 mV
[ 0.000000] regulator: SW2: 900 <--> 1850 mV
[ 0.000000] regulator: SW3: 1100 <--> 1850 mV
[ 0.000000] regulator: SW4: 1100 <--> 1850 mV
[ 0.000000] regulator: SWBST: 0 mV
[ 0.000000] regulator: VIOHI: 0 mV
[ 0.000000] regulator: VPLL: 1050 <--> 1800 mV
[ 0.000000] regulator: VDIG: 1650 mV
[ 0.000000] regulator: VSD: 1800 <--> 3150 mV
[ 0.000000] regulator: VUSB2: 2400 <--> 2775 mV
[ 0.000000] regulator: VVIDEO: 2775 mV
[ 0.000000] regulator: VAUDIO: 2300 <--> 3000 mV
[ 0.000000] regulator: VCAM: 2500 <--> 3000 mV fast normal
[ 0.000000] regulator: VGEN1: 1200 <--> 3150 mV
[ 0.000000] regulator: VGEN2: 1200 <--> 3150 mV
[ 0.000000] regulator: VGEN3: 1800 <--> 2900 mV
[ 0.000000] regulator: VUSB: 0 mV
[ 0.000000] regulator: GPO1: 0 mV
[ 0.000000] regulator: GPO2: 0 mV
[ 0.000000] regulator: GPO3: 0 mV
[ 0.000000] regulator: GPO4: 0 mV
[ 0.000000] Device spi1.0 probed
[ 1.106905] Switched to high resolution mode on CPU 0
[ 1.108453] NET: Registered protocol family 2
[ 1.108792] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.109791] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.110346] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 1.110627] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.110638] TCP reno registered
[ 1.110839] NET: Registered protocol family 1
[ 1.111035] Unpacking initramfs...
[ 1.518685] Freeing initrd memory: 6360K
[ 1.519447] LPMode driver module loaded
[ 1.519459] Static Power Management for Freescale i.MX51
[ 1.519736] PM driver module loaded
[ 1.519967] sdram autogating driver module loaded
[ 1.520280] Bus freq driver module loaded
[ 1.520321] mxc_dvfs_core_probe
[ 1.520591] DVFS driver module loaded
[ 1.520610] i.MXC CPU frequency driver
[ 1.521022] DVFS PER driver module loaded
[ 1.522667] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.522706] msgmni has been set to 909
[ 1.524017] alg: No test for stdrng (krng)
[ 1.524305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.524323] io scheduler noop registered (default)
[ 1.524350] io scheduler cfq registered
[ 1.526020] mxc_ipu mxc_ipu: Channel already disabled 9
[ 1.526033] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 1.540766] Console: switching to colour frame buffer device 80x30
[ 2.167773] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 2.170584] SIIHDMI: hotplug: display attached, powered on
[ 2.216918] SIIHDMI: 15 modes parsed from CEA video data block
[ 2.216932] SIIHDMI: HDMI VSDB detected (basic audio supported)
[ 2.216943] SIIHDMI: HDMI port configuration: 2.0.0.0
[ 2.216954] SIIHDMI: Unsupported modelines:
[ 2.216974] SIIHDMI: C "1440x576@50i" 13.500 1440 1464 1590 1728 576 586 592 631 -hsync -vsync (interlaced)
[ 2.217001] SIIHDMI: C "720x576@50" 27.00 720 732 796 864 576 586 591 630 -hsync -vsync (detailed match present)
[ 2.217027] SIIHDMI: C "1280x720@50" 74.250 1280 1720 1760 1980 720 730 735 755 +hsync -vsync (detailed match present)
[ 2.217053] SIIHDMI: C "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 2.217078] SIIHDMI: C "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 2.217104] SIIHDMI: C "1440x480@60i" 13.500 1440 1478 1602 1716 480 494 500 531 -hsync -vsync (interlaced)
[ 2.217129] SIIHDMI: C "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 2.217154] SIIHDMI: C "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 2.217181] SIIHDMI: "1920x1080@100i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync (interlaced)
[ 2.217206] SIIHDMI: "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (insufficient margin)
[ 2.217232] SIIHDMI: "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync (insufficient margin)
[ 2.217256] SIIHDMI: "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (insufficient margin)
[ 2.217280] SIIHDMI: "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync (insufficient margin)
[ 2.217305] SIIHDMI: "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync (CEA match present)
[ 2.217328] SIIHDMI: "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync (insufficient margin)
[ 2.217345] SIIHDMI: discarded 15 incompatible modes
[ 2.217353] SIIHDMI: supported modelines:
[ 2.217370] SIIHDMI: C "640x480@60" 25.175 640 656 752 800 480 492 494 527 -hsync -vsync
[ 2.217390] SIIHDMI: C "720x480@60" 27.00 720 736 798 858 480 495 501 531 -hsync -vsync
[ 2.217411] SIIHDMI: C "1280x720@60" 74.250 1280 1390 1430 1650 720 730 735 755 +hsync -vsync
[ 2.217432] SIIHDMI: "720x576@50" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync
[ 2.217452] SIIHDMI: "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 2.217473] SIIHDMI: "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 2.217494] SIIHDMI: "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 2.217515] SIIHDMI: "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 2.217537] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 2.217553] SIIHDMI: selected configuration:
[ 2.217570] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 2.396925] IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 2.435892] Serial: MXC Internal UART driver
[ 2.436080] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
[ 2.441373] loop: module loaded
[ 2.442555] pata_fsl pata_fsl: rchan=29 wchan=28
[ 2.442707] scsi0 : pata_fsl
[ 2.443225] ata1: PATA max UDMA/44 irq 70
[ 2.444633] mice: PS/2 mouse device common for all mice
[ 2.444723] mc13892 rtc probe start
[ 2.457503] pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
[ 2.457517] mc13892 rtc probe succeed
[ 2.457678] i2c /dev entries driver
[ 2.458254] Linux video capture interface: v2.00
[ 2.458767] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
[ 2.458962] MXC WatchDog Driver 2.0
[ 2.459080] clk: Unable to get requested clock: wdog_clk
[ 2.459344] MXC Watchdog # 0 Timer: initial timeout 60 sec
[ 2.459587] cpuidle: using governor ladder
[ 2.459598] cpuidle: using governor menu
[ 2.460006] PMIC Character device: successfully loaded
[ 2.460555] VPU initialized
[ 2.460915] mxsdhci: MXC Secure Digital Host Controller Interface driver
[ 2.460972] mxsdhci: MXC SDHCI Controller Driver.
[ 2.461448] mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
[ 2.462147] Registered led device: efikamx:green
[ 2.462527] Registered led device: efikamx:red
[ 2.462906] Registered led device: efikamx:blue
[ 2.463990] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 2.469013] ALSA device list:
[ 2.469028] No soundcards found.
[ 2.470250] TCP cubic registered
[ 2.470263] NET: Registered protocol family 17
[ 2.470345] ThumbEE CPU extension supported.
[ 2.471387] input: Efika MX Input as /devices/virtual/input/input0
[ 2.471872] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 2.472947] regulator_init_complete: incomplete constraints, leaving GPO4 on
[ 2.472963] regulator_init_complete: incomplete constraints, leaving GPO3 on
[ 2.472975] regulator_init_complete: incomplete constraints, leaving GPO2 on
[ 2.472987] regulator_init_complete: incomplete constraints, leaving GPO1 on
[ 2.473001] regulator_init_complete: incomplete constraints, leaving VGEN1 on
[ 2.473013] regulator_init_complete: incomplete constraints, leaving VCAM on
[ 2.473025] regulator_init_complete: incomplete constraints, leaving VAUDIO on
[ 2.473039] regulator_init_complete: incomplete constraints, leaving VSD on
[ 2.473051] regulator_init_complete: incomplete constraints, leaving VDIG on
[ 2.473065] regulator_init_complete: incomplete constraints, leaving SWBST on
[ 2.530228] pmic_rtc pmic_rtc.1: setting system clock to 2011-10-24 03:39:55 UTC (1319427595)
[ 2.619665] ata1.00: ATA-8: SanDisk pSSD-P2 8GB, SSD 5.20, max UDMA/133
[ 2.619683] ata1.00: 15649200 sectors, multi 0: LBA48
[ 2.662481] ata1.00: configured for UDMA/44
[ 2.662868] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-P2 SSD PQ: 0 ANSI: 5
[ 2.664014] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2.664226] sd 0:0:0:0: [sda] Write Protect is off
[ 2.664241] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.664343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.664933] sda: sda1 sda2
[ 2.666406] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.667884] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.667942] Freeing init memory: 144K
[ 2.667950] BFS CPU scheduler v0.376 by Con Kolivas.
[ 2.769521] udev[516]: starting version 163
[ 4.217403] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.466371] EXT4-fs (sda2): barriers enabled
[ 4.481594] kjournald2 starting: pid 652, dev sda2:8, commit interval 5 seconds
[ 4.483705] EXT4-fs (sda2): internal journal on sda2:8
[ 4.483721] EXT4-fs (sda2): delayed allocation enabled
[ 4.483734] EXT4-fs: file extents enabled
[ 4.485763] EXT4-fs: mballoc enabled
[ 4.485835] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 5.908642] SIIHDMI: hotplug: display detached, powered on
[ 6.538114] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 6.542057] SIIHDMI: hotplug: display detached, powered off
[ 7.657180] SIIHDMI: hotplug: display attached, powered on
[ 7.670283] udev[718]: starting version 163
[ 8.107556] usbcore: registered new interface driver usbfs
[ 8.107638] usbcore: registered new interface driver hub
[ 8.174193] usbcore: registered new device driver usb
[ 8.186522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.287962] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 8.292022] SIIHDMI: hotplug: display attached, powered on
[ 8.292083] SIIHDMI: failed to create device symlink
[ 8.297128] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 8.297196] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 8.326992] fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000
[ 8.357304] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 8.357919] usb usb1: configuration #1 chosen from 1 choice
[ 8.358205] hub 1-0:1.0: USB hub found
[ 8.358284] hub 1-0:1.0: 1 port detected
[ 8.489133] m25p80 spi1.1: sst25vf032b (4096 Kbytes)
[ 8.489152] Creating 3 MTD partitions on "spi_nor_flash":
[ 8.489170] 0x000000000000-0x000000040000 : "u-boot"
[ 8.489577] 0x000000040000-0x000000050000 : "config"
[ 8.489833] 0x000000050000-0x000000400000 : "spare"
[ 8.577456] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 8.577510] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 8.606995] fsl-ehci fsl-ehci.1: irq 14, io base 0x73f80200
[ 8.626995] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 8.627594] usb usb2: configuration #1 chosen from 1 choice
[ 8.627771] hub 2-0:1.0: USB hub found
[ 8.627860] hub 2-0:1.0: 1 port detected
[ 8.629440] kgsl_hal_init: hal->z430_regspace.mmio_phys_base = 0x30000000
[ 8.629459] kgsl_hal_init: hal->z430_regspace.mmio_virt_base = 0x9da00000
[ 8.629471] kgsl_hal_init: hal->z430_regspace.sizebytes = 0x00020000
[ 8.629492] kgsl_hal_init: hal->z160_regspace.mmio_phys_base = 0xd0000000
[ 8.629503] kgsl_hal_init: hal->z160_regspace.mmio_virt_base = 0x9d9ec000
[ 8.629515] kgsl_hal_init: hal->z160_regspace.sizebytes = 0x00001000
[ 8.629524] GPU MMU enabled
[ 8.708268] Reserved memory: pa = 0xae000000 va = 0xa0000000 size = 0x02000000
[ 8.708283] GSL_HAL_MEM2 aperture (PHYS) pa = 0xae000000 va = 0xa0000000 size = 0x02000000
[ 8.708299] GSL_HAL_MEM1 aperture (MMU) pa = 0x00100000 va = 0x00100000 size = 0x08000000
[ 9.627775] SIIHDMI: 15 modes parsed from CEA video data block
[ 9.627797] SIIHDMI: HDMI VSDB detected (basic audio supported)
[ 9.627809] SIIHDMI: HDMI port configuration: 2.0.0.0
[ 9.627821] SIIHDMI: Unsupported modelines:
[ 9.627842] SIIHDMI: C "1440x576@50i" 13.500 1440 1464 1590 1728 576 586 592 631 -hsync -vsync (interlaced)
[ 9.627869] SIIHDMI: C "720x576@50" 27.00 720 732 796 864 576 586 591 630 -hsync -vsync (detailed match present)
[ 9.627895] SIIHDMI: C "1280x720@50" 74.250 1280 1720 1760 1980 720 730 735 755 +hsync -vsync (detailed match present)
[ 9.627920] SIIHDMI: C "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 9.627945] SIIHDMI: C "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 9.627972] SIIHDMI: C "1440x480@60i" 13.500 1440 1478 1602 1716 480 494 500 531 -hsync -vsync (interlaced)
[ 9.627997] SIIHDMI: C "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 9.628023] SIIHDMI: C "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 9.628050] SIIHDMI: "1920x1080@100i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync (interlaced)
[ 9.628075] SIIHDMI: "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (insufficient margin)
[ 9.628101] SIIHDMI: "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync (insufficient margin)
[ 9.628126] SIIHDMI: "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (insufficient margin)
[ 9.628150] SIIHDMI: "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync (insufficient margin)
[ 9.628174] SIIHDMI: "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync (CEA match present)
[ 9.628198] SIIHDMI: "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync (insufficient margin)
[ 9.628215] SIIHDMI: discarded 15 incompatible modes
[ 9.628223] SIIHDMI: supported modelines:
[ 9.628240] SIIHDMI: C "640x480@60" 25.175 640 656 752 800 480 492 494 527 -hsync -vsync
[ 9.628260] SIIHDMI: C "720x480@60" 27.00 720 736 798 858 480 495 501 531 -hsync -vsync
[ 9.628281] SIIHDMI: C "1280x720@60" 74.250 1280 1390 1430 1650 720 730 735 755 +hsync -vsync
[ 9.628302] SIIHDMI: "720x576@50" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync
[ 9.628322] SIIHDMI: "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 9.628343] SIIHDMI: "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 9.628365] SIIHDMI: "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 9.628386] SIIHDMI: "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 9.628408] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 9.628424] SIIHDMI: selected configuration:
[ 9.628442] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 9.767473] sgtl5000-i2c 1-000a: SGTL5000 revision 17
[ 10.165557] No device for DAI imx-ssi-2-0
[ 10.165578] No device for DAI imx-ssi-2-1
[ 10.178036] DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffe2000 buf->area=9d842000 size=24576
[ 10.178166] DMA Sound Buffers Allocated:UseIram=1 buf->addr=a8320000 buf->area=f9e0a000 size=24576
[ 10.178181] asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
[ 10.414585] DMFC high resolution has set, will not change
[ 10.577067] usb 1-1: new high speed USB device using fsl-ehci and address 2
[ 10.772581] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.778726] ramzswap: num_devices not specified. Using default: 1
[ 10.780272] ramzswap: /dev/ramzswap0 initialized: disksize_kb=131072
[ 10.947485] usb 1-1: configuration #1 chosen from 1 choice
[ 11.127310] usb 2-1: new high speed USB device using fsl-ehci and address 2
[ 11.364010] usb 2-1: configuration #1 chosen from 1 choice
[ 11.367202] hub 2-1:1.0: USB hub found
[ 11.367906] hub 2-1:1.0: 4 ports detected
[ 11.632101] kjournald starting. Commit interval 15 seconds
[ 11.710310] EXT3 FS on sda1, internal journal
[ 11.710345] EXT3-fs: mounted filesystem with writeback data mode.
[ 11.837272] usb 2-1.1: new high speed USB device using fsl-ehci and address 3
[ 12.125204] usb 2-1.1: configuration #1 chosen from 1 choice
[ 12.451074] NET: Registered protocol family 10
[ 12.452496] lo: Disabled Privacy Extensions
[ 12.459296] usb 2-1.3: new high speed USB device using fsl-ehci and address 4
[ 12.572645] eth0: register 'asix' at usb-fsl-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:56:1b:9c
[ 12.572814] usbcore: registered new interface driver asix
[ 12.616845] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.633789] rtusb init --->
[ 12.713222] usbcore: registered new interface driver rt2870
[ 12.752507] usb 2-1.3: configuration #1 chosen from 1 choice
[ 12.753110] hub 2-1.3:1.0: USB hub found
[ 12.753496] hub 2-1.3:1.0: 4 ports detected
[ 13.002231] Adding 131064k swap on /dev/ramzswap0. Priority:0 extents:1 across:131064k SS
[ 13.117576] usb 2-1.3.2: new low speed USB device using fsl-ehci and address 5
[ 13.429869] usb 2-1.3.2: configuration #1 chosen from 1 choice
[ 13.667438] usb 2-1.3.3: new full speed USB device using fsl-ehci and address 6
[ 13.691035] input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/input/input1
[ 13.691439] generic-usb 0003:04D9:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-fsl-ehci.1-1.3.2/input0
[ 13.767353] input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/input/input2
[ 13.767780] generic-usb 0003:04D9:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-fsl-ehci.1-1.3.2/input1
[ 13.767873] usbcore: registered new interface driver usbhid
[ 13.767888] usbhid: v2.6:USB HID core driver
[ 13.942008] usb 2-1.3.3: configuration #1 chosen from 1 choice
[ 13.948195] input: Logitech USB Receiver as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/input/input3
[ 13.948590] generic-usb 0003:046D:C52F.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fsl-ehci.1-1.3.3/input0
[ 14.054489] input: Logitech USB Receiver as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.1/input/input4
[ 14.055147] generic-usb 0003:046D:C52F.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-fsl-ehci.1-1.3.3/input1
[ 14.349001] usb 2-1.3.4: new high speed USB device using fsl-ehci and address 7
[ 14.488176] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.618290] usb 2-1.1: firmware: requesting rt3070.bin
[ 14.667405] usb 2-1.3.4: configuration #1 chosen from 1 choice
[ 14.731686] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.804186] usbcore: registered new interface driver libusual
[ 14.830081] Initializing USB Mass Storage driver...
[ 14.870822] scsi1 : SCSI emulation for USB Mass Storage devices
[ 14.876078] usbcore: registered new interface driver usb-storage
[ 14.876100] USB Mass Storage support registered.
[ 14.908658] usb-storage: device found at 7
[ 14.908674] usb-storage: waiting for device to settle before scanning
[ 16.474519] 0x1300 = 00073200
[ 16.596945] DMFC high resolution has set, will not change
[ 16.687287] Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
[ 17.116279] mxc_ipu mxc_ipu: Channel already disabled 9
[ 17.116295] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 17.173832] DMFC high resolution has set, will not change
[ 19.910558] usb-storage: device scan complete
[ 19.914051] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084D TS01 PQ: 0 ANSI: 0
[ 20.100287] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.100312] Uniform CD-ROM driver Revision: 3.20
[ 20.100865] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 20.101227] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.125214] 0x1300 = 00073200
[ 25.336924] eth0: no IPv6 routers present
[ 27.035452] imx_ssi_irq mxc_ssi SISR 3c30 SIER 780500 fifo_errs=1
[ 31.456221] UDF-fs: Partition marked readonly; forcing readonly mount
[ 31.479634] UDF-fs INFO UDF: Mounting volume 'Underworld', timestamp 2036/02/07 02:58 (103c)
[ 32.176921] wlan0: no IPv6 routers present
[ 57.767048] DMFC high resolution has set, will not change
[ 57.787728] Not all allocated memory blocks were freed. Doing it now.
[ 57.787756] Freeing list entry #8, gpuaddr=ae44e000
[ 61.102410] SIIHDMI: hotplug: display detached, powered on
[ 61.727765] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 61.730498] SIIHDMI: hotplug: display detached, powered off
[ 76.916930] DMFC high resolution has set, will not change
[ 76.916983] SIIHDMI: selected configuration:
[ 76.917007] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 77.117280] Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
[ 77.518087] mxc_ipu mxc_ipu: Channel already disabled 9
[ 77.518102] mxc_ipu mxc_ipu: Channel already uninitialized 9
[ 77.537027] DMFC high resolution has set, will not change
[ 79.829755] SIIHDMI: hotplug: display attached, powered on
[ 80.457864] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 80.460680] SIIHDMI: hotplug: display attached, powered on
[ 80.460737] SIIHDMI: failed to create device symlink
[ 80.912525] SIIHDMI: 15 modes parsed from CEA video data block
[ 80.912551] SIIHDMI: HDMI VSDB detected (basic audio supported)
[ 80.912563] SIIHDMI: HDMI port configuration: 2.0.0.0
[ 80.912574] SIIHDMI: Unsupported modelines:
[ 80.912596] SIIHDMI: C "1440x576@50i" 13.500 1440 1464 1590 1728 576 586 592 631 -hsync -vsync (interlaced)
[ 80.912624] SIIHDMI: C "720x576@50" 27.00 720 732 796 864 576 586 591 630 -hsync -vsync (detailed match present)
[ 80.912650] SIIHDMI: C "1280x720@50" 74.250 1280 1720 1760 1980 720 730 735 755 +hsync -vsync (detailed match present)
[ 80.912675] SIIHDMI: C "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 80.912700] SIIHDMI: C "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 80.912726] SIIHDMI: C "1440x480@60i" 13.500 1440 1478 1602 1716 480 494 500 531 -hsync -vsync (interlaced)
[ 80.912752] SIIHDMI: C "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1094 1104 1135 +hsync -vsync (interlaced)
[ 80.912777] SIIHDMI: C "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1089 1094 1130 +hsync -vsync (pixel clock exceeded)
[ 80.912804] SIIHDMI: "1920x1080@100i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync (interlaced)
[ 80.912829] SIIHDMI: "1024x768@75" 78.802 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (insufficient margin)
[ 80.912855] SIIHDMI: "800x600@75" 49.500 800 816 896 1056 600 601 604 625 +hsync +vsync (insufficient margin)
[ 80.912879] SIIHDMI: "800x600@60" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (insufficient margin)
[ 80.912904] SIIHDMI: "640x480@75" 31.500 640 656 720 840 480 481 484 500 -hsync -vsync (insufficient margin)
[ 80.912928] SIIHDMI: "640x480@60" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync (CEA match present)
[ 80.912953] SIIHDMI: "720x400@70" 26.171 720 737 808 896 400 401 404 417 -hsync -vsync (insufficient margin)
[ 80.912969] SIIHDMI: discarded 15 incompatible modes
[ 80.912977] SIIHDMI: supported modelines:
[ 80.912994] SIIHDMI: C "640x480@60" 25.175 640 656 752 800 480 492 494 527 -hsync -vsync
[ 80.913015] SIIHDMI: C "720x480@60" 27.00 720 736 798 858 480 495 501 531 -hsync -vsync
[ 80.913035] SIIHDMI: C "1280x720@60" 74.250 1280 1390 1430 1650 720 730 735 755 +hsync -vsync
[ 80.913056] SIIHDMI: "720x576@50" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync
[ 80.913077] SIIHDMI: "720x480@59" 27.00 720 736 798 858 480 489 495 525 -hsync -vsync
[ 80.913098] SIIHDMI: "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 80.913119] SIIHDMI: "1024x768@70" 75.01 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
[ 80.913140] SIIHDMI: "1024x768@60" 65.02 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
[ 80.913162] SIIHDMI: * "1360x768@60" 85.506 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
[ 80.982314] DMFC high resolution has set, will not change
Bets regards,
HaPe
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Oct 25, 2011 11:59 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Other Problem is, as you can see above it is in DVI Mode instead of HDMI. But my TV has no DVI. Only HDMI and VGA. The Cable is a straight HDMI Cable. And of course i have no sound over HDMI.
Code:
[ 2.167773] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 2.170584] SIIHDMI: hotplug: display attached, powered on
[ 2.216918] SIIHDMI: 15 modes parsed from CEA video data block
[ 2.216932] SIIHDMI: HDMI VSDB detected (basic audio supported)
[ 2.216943] SIIHDMI: HDMI port configuration: 2.0.0.0
Bets regards,
HaPe
Okay. We don't need Xorg.log as it makes no difference. From the above I notice the TV says it supports basic audio which means there should absolutely be audio support, which means the sink is forced into HDMI mode rather than DVI mode (if there is no audio on the TV, which is really weird, we make the valid assumption that we shouldn't bother to send any HDMI information or use HDMI sink type since it causes more problems for TVs which internally are just DVI with an HDMI connector).

Since you're properly in HDMI mode this is weird.. but, try going into /etc/init/efikamx.conf and look for the line that "modprobe snd-spdif.ko" - there should be an if statement there and it needs to be modified to actually load the SPDIF driver;
Code:
if [ "xhdmi" = "x${audio}"]; then
modprobe snd-spdif
fi
Should be
Code:
if [ "xhdmi" = "x${audio}" ]; then
modprobe snd-spdif
fi
(note the space between the audio check and the square bracket. I introduced this innocent typo when I saved the file and built the package)

That should make audio work but I don't see any evidence that your monitor is in fact running in DVI mode from the driver's perspective. It's just a crappy UI error on your TV.

_________________
Matt Sealey
Top
   
Reply with quote  
HaPe
 Post subject:
PostPosted: Tue Oct 25, 2011 5:05 pm 
Offline

Joined: Fri Oct 21, 2011 12:49 am
Posts: 3
Hmmm, my /etc/init/efikamx.conf looks a bit different in this Section.
Code:
if [ "${board}" = "efikamx" ]; then
audio="none"
if [ -f /sys/class/graphics/fb0/phys-link/audio ]; then
audio=$(cat /sys/class/graphics/fb0/phys-link/audio)
fi
if [ -f /sys/class/graphics/fb0/audio ]; then
audio=$(cat /sys/class/graphics/fb0/audio)
fi
if [ "xhdmi" = "x${audio}" ]; then
if [ -f /lib/modules/`uname -r`/kernel/sound/arm/snd-spdif.ko ]; then
modprobe snd-spdif
fi
fi
fi
But i check the logic and copy this relevant piece in a script and run it with some echo Output.

this Line fill the var ${audio} with hdmi
Code:
if [ -f /sys/class/graphics/fb0/phys-link/audio ]; then
this Line do nothing because the checked file dont exists
Code:
if [ -f /sys/class/graphics/fb0/audio ]; then
But on the end the Sounddriver will loaded.
Code:
root@efika:/etc/init# lsmod | grep snd
snd_soc_imx_3stack_sgtl5000 8780 0
snd_soc_imx 6752 1 snd_soc_imx_3stack_sgtl5000
snd_soc_imx_ssi 6572 1 snd_soc_imx_3stack_sgtl5000
snd_spdif 16328 1
snd_soc_sgtl5000 14572 3 snd_soc_imx_3stack_sgtl5000
To the TV and display "DVI Mode". Okay maybe it can be. But i give this only a very small chance. Because,

i connect my WeTab (x86) with HDMI on the TV and it displays HDMI with Sound over HDMI
i connect my Mediaplayer (realtek) with HDMI on the TV and it is HDMI and Sound over HDMI
i checked it with older Kernel from Mai and it shows me HDMI with Sound over HDMI

Best Regards,
HaPe
Top
   
Reply with quote  
Neko
 Post subject:
PostPosted: Tue Oct 25, 2011 10:59 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Hmmm, my /etc/init/efikamx.conf looks a bit different in this Section.
Code:
if [ "${board}" = "efikamx" ]; then
audio="none"
if [ -f /sys/class/graphics/fb0/phys-link/audio ]; then
audio=$(cat /sys/class/graphics/fb0/phys-link/audio)
fi
if [ -f /sys/class/graphics/fb0/audio ]; then
audio=$(cat /sys/class/graphics/fb0/audio)
fi
if [ "xhdmi" = "x${audio}" ]; then
if [ -f /lib/modules/`uname -r`/kernel/sound/arm/snd-spdif.ko ]; then
modprobe snd-spdif
fi
fi
fi
But i check the logic and copy this relevant piece in a script and run it with some echo Output.

this Line fill the var ${audio} with hdmi
Code:
if [ -f /sys/class/graphics/fb0/phys-link/audio ]; then
this Line do nothing because the checked file dont exists
Code:
if [ -f /sys/class/graphics/fb0/audio ]; then
But on the end the Sounddriver will loaded.
Code:
root@efika:/etc/init# lsmod | grep snd
snd_soc_imx_3stack_sgtl5000 8780 0
snd_soc_imx 6752 1 snd_soc_imx_3stack_sgtl5000
snd_soc_imx_ssi 6572 1 snd_soc_imx_3stack_sgtl5000
snd_spdif 16328 1
snd_soc_sgtl5000 14572 3 snd_soc_imx_3stack_sgtl5000
To the TV and display "DVI Mode". Okay maybe it can be. But i give this only a very small chance. Because,

i connect my WeTab (x86) with HDMI on the TV and it displays HDMI with Sound over HDMI
i connect my Mediaplayer (realtek) with HDMI on the TV and it is HDMI and Sound over HDMI
i checked it with older Kernel from Mai and it shows me HDMI with Sound over HDMI

Best Regards,
HaPe
Okay I have a sneaky feeling something's preventing us from going into HDMI mode, which may explain a lot.. that said, all the test monitors we have here all do SPDIF audio just fine, so it's esoteric.

Will debug it tomorrow and see if I can find a reason.

_________________
Matt Sealey
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » »

All times are UTC-06:00

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group