I am having problems with poor HMDI compatibility on the Smarttop. I have tried 3 Large Screen TV's and 2 Monitors and only 1 Monitor will work with the Efika's HDMI.
I also have a Trimslice, it's an early dev kit surrounded in perspex but happily works with them all so please don't blame my equipment.
Here is the bootlog and parsed EDID below that.
Is there any way to manually override to a suitable mode?
Is there fix in the pipeline or is this just a limitation of the current hardware?
[ 2.168073] SIIHDMI: Device ID: 0xb0 (TPI revision 2.9)
[ 2.170952] SIIHDMI: sink detected (hotplug, receiver sense, )
[ 2.217727] SIIHDMI: Added 16 modes from CEA Video Data Block
[ 2.217740] SIIHDMI: HDMI sink verified
[ 2.217750] SIIHDMI: Port Config 4.0.0.0
[ 2.217779] SIIHDMI: Unsupported modelines:
[ 2.217801] SIIHDMI: i "1440x480@60i" 13.500 1440 1478 1602 1716 480 494 500 531 -hsync -vsync
[ 2.217823] SIIHDMI: i "1440x576@50i" 13.500 1440 1464 1590 1728 576 586 592 631 -hsync -vsync
[ 2.217845] SIIHDMI: i "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1094 1104 1135 +hsync -vsync
[ 2.217868] SIIHDMI: i "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1094 1104 1135 +hsync -vsync
[ 2.217889] SIIHDMI: p "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1089 1094 1130 +hsync -vsync
[ 2.217911] SIIHDMI: p "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1089 1094 1130 +hsync -vsync
[ 2.217933] SIIHDMI: c "1280x720@60" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
[ 2.217955] SIIHDMI: c "1280x720@50" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
[ 2.217976] SIIHDMI: i "1920x1080@120i" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync
[ 2.217998] SIIHDMI: i "1920x1080@100i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync
[ 2.218020] SIIHDMI: p "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
[ 2.218041] SIIHDMI: P "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
[ 2.218055] SIIHDMI: Removed 12 modes due to incompatibilities
[ 2.218064] SIIHDMI: Supported modelines:
[ 2.218081] SIIHDMI: C "640x480@60" 25.175 640 656 752 800 480 492 494 527 -hsync -vsync
[ 2.218101] SIIHDMI: C "720x480@60" 27.00 720 736 798 858 480 495 501 531 -hsync -vsync
[ 2.218121] SIIHDMI: C "720x576@50" 27.00 720 732 796 864 576 586 591 630 -hsync -vsync
[ 2.218142] SIIHDMI: C "1280x720@60" 74.250 1280 1390 1430 1650 720 730 735 755 +hsync -vsync
[ 2.218162] SIIHDMI: C "1280x720@50" 74.250 1280 1720 1760 1980 720 730 735 755 +hsync -vsync
[ 2.218183] SIIHDMI: C "1920x1080@24" 74.250 1920 2558 2602 2750 1080 1089 1094 1130 +hsync -vsync
[ 2.218201] SIIHDMI: Setting Resolution: 1920x1080@10.7
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fc
Identifier "Panasonic-TV"
VendorName "MEI"
ModelName "Panasonic-TV"
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
HorizSync 15-68
VertRefresh 23-61
# Max dot clock (video bandwidth) 150 MHz
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "1920x1080" # vfreq 50.000Hz, hfreq 56.250kHz
DotClock 148.500000
HTimings 1920 1968 2012 2640
VTimings 1080 1084 1089 1125
Flags "+HSync" "+VSync"
EndMode
Mode "1920x1080" # vfreq 60.000Hz, hfreq 67.500kHz
DotClock 148.500000
HTimings 1920 2008 2052 2200
VTimings 1080 1084 1089 1125
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
EndSection
|